TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
Switches without PoE can with this Injector "upgraded" to PoE switch
24 ports PoE full power supply
Per port DC 52V 30.8/15.4 watts
LAN without PoE in, LAN with PoE out
10 / 100 / 1000Mbit network
Max PoE 440 Watts
Ved at sætte ETH-POE24G imellem f.eks. netværksswitchen og klienten kan klienten tilslutte PoE udstyr uden at skifte netværksswitchen ud. Der er ingen forbindelse mellem de enkelte porte, så den kan bruges til flere forskellige netværk. ETH-POE24G understøtter PoE-standarden IEEE802.3af.
TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
Quick and Easy PoE tester
IEEE 802.3af / at
UTP Cat 5 or above
100 meters max.
Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
weight: 20g
2 Ports Poe Injector provides 2 x 36Watt for PD equipment
10/100/1000 Mbit
pin 4/5 (+), pin 7/8 (-)
4 x RJ45 (2 with data and 2 with data + PoE for equipment)
supply voltage: 12 - 56VDC
Power Budget is 60 - 72 Watt
Dim: 105 x 70 x 30 watts
Weight: 280g
Operating temperature: -40 - + 75 ° C
DIN mounting
PoE++ power supply via Ethernet cable, up to 60 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 48-53VDC/60W
Mid-span and End-span give 60Watt
For 100/1000/2500/5000Mbit networks.
Power is supplied from 48 - 54VDC
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN mount
Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.