48VDC 2.5A (96W) power supply from 100 - 240VAC, DIN rail
AC / DC power supply for DIN rail mounting for 48VDC, 96W
Max. 2.5A
Screw Terminal
Adjustable Output Voltage 43.2 to 52.8 V
Working Temperature: -20 ° C - + 50 ° C
Ethernet over Coax or UTP cable
can be powered with PoE from PoE Switch
can be powered with Poe from injector
4 x 10 / 100Mbit with PoE (Power Budget is 20W)
1 x RJ45 Poe Long Reach
1 x BNC Port to Long Reach Coax
PoE and Ethernet Data Via Coax Up to 1km
PoE and Ethernet Data Via Networking Up to 500m
Supply 44-56V DC or PoE from Switch / injector
for wall mounting or DIN rail
Dim: 135 x 87.8 x 56 mm
Operating temperature -20 to + 70 °
AC / DC power supply for DIN rail mounting for 48VDC, 96W
Max. 2.5A
Screw Terminal
Adjustable Output Voltage 43.2 to 52.8 V
Working Temperature: -20 ° C - + 50 ° C
Use VDSL connection over 2-thread cable where WiFi is an unstable connection
up to 1.4 km above eg. Conducted phone cable with 2 pcs. VDSL modules
Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+
Ethernet over 2-wire connection with VDSL
Ideal solution When the network distance is over 100 meters of border
ideal solution when a WiFi Link is an unstable connection
providing a transparent data connection
supply: 5VDC, 2A power supply included
DIP switch: VDSL connection must be set to CPE and the other for CO.
Prepared for your Montage, wall assembly. Your fittings are purchased
Order 2 pcs for a set.
Network Extender of RJ45 UTP patch cable
PoE transmitted in the cable from the PSE to the PD
1 x 10 / 100Mbit BASE-TX RJ45
Data rate: 94 - 30Mbps auto-optimization
Auto -negotiation / auto-MDI / MDI-X
PoE Standard: IEEE 802.3at / PoE of
Output: 48-56VDC max. 38 Watt
1 x RJ45 to VDSL + PoE
PoE pin: Pin 1/3/5/7 (+ ) 2/4/6/8 (-)
Distance: 100m m / PoE +, 500m w / PoE, without PoE 1000m
Powered by the 48-56VDC min. 2Amp
1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp
Rest storage
Vdsl2 router with 4 x RJ45 and WiFi
Network connection up to 1.4 km above 2-wire telephone cables
point to point federal
2 pcs. Eth-VDSL2ROUTER for a connection