ICPDAS Industri automation

Indbygget webserver
Web-HMI
Modbus TCP og Modbus UDP-protokoller
2 x RJ45 Ethernet - Daisy chain
God kommunikationssikkerhed
Dual Watchdog
Driftstemperaturområde: -25 ~ +75°C
I/O Pair - andet moduls indgang spejles til udgang
8 x Power Relæ - elektromekanisk, COM N.O
Relæskiftetid: on: 10ms, off: 5ms
Relæ kontaktspænding og strøm: 24VDC/250VAC/5A
Elektromekanisk: Undgå induktiv belastning
Forsyningsspænding: 12 - 48VDC

ICP DAS I-7231-D-G-CR

DC-DC konverter egnet til industrien
18 - 36VDC DC/DC konverter til 12VDC
Isoleret DC/DC omformer med stort spændingsområde
12VDC 800mA (9,6Watt)
Mål: 113 x 70 x 24 mm

Indbygget webserver
Web HMI
Støtte til MQTT protokollen
2-port Ethernet-switch til Daisy-Chain Topology
Dual Watchdog
Driftstemperatur -25 til + 75 °C
DI: 8 Kanaler
DO: 8 Kanaler

24 stk.skifterelæ (COM, NC, NO) 250VAC og 24VDC 1Amp
24 lysdioder viser relæstilling
Styres af TTL signal (+5VDC er relæ ON)
Forsynes med +24 VDC eksternt
Stik: IDC50
Mål: 130 x 220 mm (B x D)

AT-bus
500 VDC-fotoisoleringsbeskyttelse - Indgangskanal med 1 kanals spændvidde
Indbygget 1 KB FIFO
Spænding til vejecelle: 12 V, 50 mA
Maksimal forstærkning Op til 40.000
Programmerbar 12-bit opløsning, DC-offset-spænding (0 ~ 5 V)
Andet ordre med lavpasfilterindbygning
Direkte forbindelse til spændvidde type loadcell
8-kanals 12 ~ 24 V isoleret digital indgang
7-kanals isoleret åben kollektor digital udgang
Programmerbar 8-bit LED-indikator.
Command-sæt programmering

XV111 levere 16 digitale udgangssignaler, hver udgang er isoleret med en optokobler.  XV111 udgang er sink-typen, med kortslutningsbeskyttelse og kan konfigureres til under opstart (power-on), at levere en digital udgangsværdi.

Alle digitale udgange er ±4kV ESD beskyttet og er galvanisk isoleret op til 3750VDC.

Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.

Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.

The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.

The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.

The I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..

I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.

I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..

I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..

I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..

iP-8000-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.