VH-2110
ViewPAC combines iPAC, graphic display and keypad in one unit. It equips an 80186 CPU (16-bit and 80MHz) running a MiniOS7 operating system, several communication interface (Ethernet, RS-232/485), STN LCD and a rubber keypad.
ICP DAS I-7231-D-G-CR
Hardware
Watchdog: Watchdog IC
CAN Interface:
Controller: NXP SJA1000T with 16 MHz clock
Transceiver: NXP 82C250
Connector : 5-pin screwed terminal block (CAN_L, CAN_H, N/A for others)
Isolation : 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor : Jumper for 120 Ω terminator resistor
Protocol : CANopen DS-301 ver4.02, DS-401 ver2.1
UART Interface:
COM 1: RS-232 (For configuration)
COM 2: RS-485 (Self-turner inside)
Transmission Distance (m): Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Baud Rate (bps):1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Protocol: DCON
LED:
Round LED: MS LED, NS LED, IO LED
5-digit 7 Segment : Yes
Power:
Power supply: Unregulated +10 ~ +30 VDC
Protection : Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 3W
Mechanism:
Dimensions: 72mm x 122mm x 33mm (W x L x H)
Environment:
Operating Temp.: -25 ~ 75 ℃
Storage Temp.: -30 ~ 80 ℃
Humidity: 10 ~ 90% RH, non-condensing
I-7188E Internet Embedded Controller familien gør det muligt at port-konvertere Ethernet (10 Base-T) til RS-232/485/422. Tallet efter bogstavet E i typenr. I-7188Ex indikere antallet af serielle COM porte. I-7188E2 tilbyder således 2 serielle COM porte RS-232 og RS-485.
I-7188E er en kosteffektive metode når serielle porte skal kommunikere med en Ethernet port.
WinPAC-8000 er den anden generation af PAC (Programmable Automation Controller) fra ICP DAS.
WinPAC-8000 anvender PXA270 CPU (520MHz) og kører med Windows CE .NET 5.0 operativ system.
WinPAC-8000 tilslutningsmuligheder:
VGA, USB, Ethernet, RS-232/485 og 1/4/8 slots med ekstrem høj ydeevne.
Parallelle I/O moduler (høj profil I-8K serien) og serielle I/O moduler (høj profil I-87K serien).
The GTM-201 series are industrial Quad-band GSM/GPRS modems with RS-232 and USB interfaces that work on frequencies of GSM 850 MHz, EGSM 900 MHz, DCS 1800 MHz and PCS 1900 MHz. The modems utilize the GSM/GPRS network for convenient and inexpensive data transfer from remote instruments, meters, computers or control systems in either live data or packet data.