Digital I/O - DI / DO / Relay / Counter

This type of module is primarily used for industrial control, monitoring and control. Is very hardy and suitable for external applications where they can be assembled with other type of modules in order to solve a complex task. Is widely used for building automation, factory automation, production machines, energy management etc. Contact DANBIT if you have special wishes and requirements to be met.

Digital I/O - DI / DO / Relay / Counter

There are 98 products.

Products per page:
25 50 75 100
Sort by:
Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 1-20 of 98 item(s)

Active filters

High Speed ​​4 analogue...

High Speed ​​4 analogue inputs 128kHz sample rate, 24-bit, 12bit 2 analog outputs, 1 EI, 7 digital I / O, -25 - + 75 ° C, PoE

4 single ended input +/- 10V analog, +/- 5V, +/- 2.5V ... +/- 20mV
128kS / s for each channel sampling rate
FIFO: 4000 samples - memory 30 million data samples
24bit resolution
2 x analog output +/- 10V, +/- 5V, 0-5 / 10V
analog output 12bit resolution
Trigger mode: SW, Ext analog
1 x 32bit counter, max. 30kHz
1 x Encoder input: Qadrant / CW / CCW and pulse
3 x digital inputs (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm | Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C

Price Call for price
Product code: ETHIO4AI2AO7IO-P-I
On the way in  
Quick view
    • Remote control over...

    Remote control over network. 8 x powerful relays, 8 digital inputs. To temperature and moisture meter. Delayed engaging possible

    8 Potential-free relay outputs - 230Vac / 16 A, 24VDC / 10 A
    Relay outputs are individually via HTTPS, SNMP or Command
    Startup delay from 0 to 9999 seconds. Adjusted individually
    Inrush Delay is set to 1 second
    Programmable on / off sequence
    Activating relays can be controlled from sensor or inputs
    8 channel watchdog via ICMP / TCP Ping
    8 signal entrances From NO and NC units, door contacts, etc.
    Entrance to sensors Temperature, humidity and air pressure
    Messages via e-mail, Sylog and SNMP Trap MQTT
    Depending on thresholds for sensor measurement and signal input
    LED display for overall power, IP address, sensor data and error reports
    Android app and iOS app
    DIN bracket

    Price Call for price
    Product code: ETHIO8I8PR-SENS
    On the way in  
    Quick view
    • MQTT 16 x Digital input...

    MQTT 16 x Digital input module. TCP and MQTT protocol, 2 x LAN ports Daisy chain. Wet contact input. 12 - 48VDC

    Built-in web server
    Web HMI
    Supports Modbus TCP and MQTT protocols
    2-port Ethernet switch (LAN Bypass) for Daisy-Chain Wiring
    Double watchdog
    Digital input: 16 channels
    Wet contact input
    Input high = +10 - 50VDC (ON)
    Input low = < +4VDC
    Supply voltage: 12 - 48VDC
    Temperature: -25 - +75°C
    Dimensions: 120 x 97 x 42

    Price Call for price
    Product code: MQ-I16W-2L
    On the way in  
    Quick view
    • Remote control and data...

    Remote control and data logging of Server rooms, industrial installation. Digital, analog, relay, CAN bus. SNMP.

    Industrial and IT room monitor unit
    1 x RJ45 Ethernet 10/100 Mbps
    USB port For USB camera
    USB memory for logging, max. 64GB SD
    Built-in USB hub
    4 x Analog ports for sensors (can be expanded)
    2 x Digital input (dry contact)
    1 x CAM port (max. 10 sensors, can be expanded)
    2 x Relay output
    Desktop, Wall, (Option: DIN and 19" brackets as extensions)
    Dimensions: 150 x 140 x 28 mm

    Price Call for price
    Product code: REMOTE-MON-LOG325
    On the way in  
    Quick view
    • Ethernet Module with Modbus...

    Ethernet Module with Modbus TCP/IP. 2 x digital input, 2 x power relay output, I/O Pair connection, 12 - 48VDC

    Ethernet I/O module Modbus/TCP / UDP slave
    1 x RJ45 Ethernet
    Redundant Power Supply
    Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
    Web configuration and firmware update via Ethernet
    2 x digital input (Wet - volts supplied)
    2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
    Avoid inductive load to relay contacts
    With locked DI and 32-bit 3.5kHz counter
    With I/O pair - input is mirrored in the other's output
    Dual-watchdog with Power-on-safe value
    Supply voltage: 12 - 48VDC, 1.7 Watt
    Dimensions: 98 x 52 x 27 mm
    Operating temperature: -25 - +75°C

    Price 972.00 DKK
    Product code: ETH-MOD2I2R-I
    Physically in stock  
    Quick view
    • Back to top