Gateway / Protocol converter

For connecting and exchanging data among various automation devices in industrial fields, ICP DAS provides a variety of different communication products to support widely used industrial communication protocols and interfaces.

Gateway / Protocol converter

There are 18 products.

Showing 1-18 of 18 item(s)

Active filters

Profibus DP Master for...

Profibus DP Master for Ethernet Slave Devices Gateway. DIN

Gateway from Ethernet slave to PROFIBUS master
protocol / hierarchy: DP-V0 Slave
PROFIBUS Speed ​​(Kbps) in 10 step from 9.6 - 12000
speed setting is automatic
Max. Input data length: 240 byte
Max. Output data length: 240 bytes
Address setting: 0 ~ 126 Set by DIP switch or EEPROM
Ethernet protocol: TCP / UDP server / client
Configuration: Web Configuration

Price 4,672.00 DKK
Product code: M485-PROFI-ETH-I
On the way in  
  • RS232 / 422/485 to HART...

    RS232 / 422/485 to HART Convert, Hart Terminal Block for 2-wire. 10 - 30vdc.

    Serial to HART Convert
    Allows 2 pcs. Hart Masters
    Point-to-Point or Multi-Drop Hart Mode
    Possibility of connecting 15 HART modules
    Point-to-point or multi-drop HART mode
    for configuration of modules
    Isolated COM 1: RS-232 / 422/485
    PWR / RUN / ERR INDICATION LED
    Built-in Watchdog
    4 kV ESD protection

    Price 3,750.00 DKK
    Product code: M485-HART-I
    On the way in  
  • Profibus Master (RS232) for...

    Profibus Master (RS232) for 4 Port Hart Slave Gateway Converter.

    PROFIBUS TO HART Convert, Gateway
    4 x HART Canals
    Max. 2 pcs. HART Masters
    Point-to-Point or Multi-Drop HART Mode
    Possibility of connecting 15 HART modules
    PWR / RUN / ERR indication LED
    Built-in Watchdog
    4 kV ESD Protection
    Operating temperature -25-75 ℃
    for DIN rail mounting

    Price 6,204.00 DKK
    Product code: M485-PROFI-HART
    On the way in  
  • Modbus TCP Server Master...

    Modbus TCP Server Master for M-Bus Slavs Gateway. Supports up to 100 M-bus units. 1 x RJ45, 1 x RS232, M-Bus

    Supports M-Bus Standard: EN-13757, CJ / T -188
    1 x RJ45 Modbus TCP
    1 x M bus for maximum 100 slaves
    M-Bus Power limiter
    1 X RS232 for firmware update
    Modbus TCP / RTU Function code 0x03 and 0x04 To read measurement data
    Baud rate: DIP switch to M-Bus and serial port from 300 to 115200 BPS. Standard M-Bus port- Data format: data bit 8, parity straight, stop bit 1
    supports up to 100 m bus slaves
    m-bus power protection
    short circuit protection on M-bus
    Firmware updates via serial port
    gives PWR, MTX and MRX 3 LED Indicators
    Wall Mounting
    Dim: 123 x 102 x 40 mm
    Supply voltage: 10 - 30VDC

    Price 3,455.00 DKK
    Product code: ETH-MOD-MBUS-I
    On the way in  
  • MODBUS / TCP to serial RTU...

    MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x RJ45, 1 x RS232 isolated, -25 - + 75 ° C, PoE, or 12 - 48VDC

    Compact Modbus / TCP for RTU / ASCII Gateway with PoE
    must not be programmed
    1 x RJ45 10 / 100Mbps
    1 x RS232 (DB9 Han)
    Supports Modbus TCP / UDP Master and Slave
    Supports Modbus RTU / ASCII Master and Slave
    Baud Rate Up to 115,200 BPS
    Self-Tuner for RS232
    IEEE 802.3af - PoE (PD)
    Supply voltage U / Poe: 12 - 48VDC 2Watt
    Goal: 90 x 52 x 27 mm
    DIN bracket
    Operating temperature: -25 - + 75 ° C

    Price 1,209.00 DKK
    Product code: ETH-MODGW712-I
    Physically in stock  
  • MODBUS/TCP to serial RTU...

    MODBUS/TCP to serial RTU Master/Slave, Gateway, 1 x 1 x RJ45 RS485 / 422 isolated, -25 - +75°C, PoE, or 12 - 48VDC

    Compact Modbus / TCP to RTU / ASCII gateway with PoE
    not to be programmed
    1 x RJ45 10 / 100Mbps
    1 x RS485 / 422 (screw terminal)
    baud rate up to 115,200 bps
    Self-tuner for RS485 / 422
    Automatic transmission / reception direction of RS485
    IEEE 802.3af - PoE (PD)
    Supply voltage u / PoE: 12 - 48VDC 2Watt
    Dimensions: 90 x 52 x 27 mm
    DIN bracket
    Operating temperature: -25 - +75°C

    Price 1,566.00 DKK
    Product code: ETH-MODGW715-I
    On the way in  
  • MODBUS / TCP to serial RTU...

    MODBUS / TCP to serial RTU Master Slave, Gateway, RJ45 1 x 1 x RS-232/485/422 isolated, -25 - +75°C, PoE, or 12 - 48VDC

    Compact Modbus / TCP to RTU / ASCII gateway with PoE
    not to be programmed
    1 x RJ45 10 / 100Mbps
    1 x RS232 / RS485 / RS422 (terminal block)
    Choose only one COM port as interface
    3-pin RS232 (RX, TX, GND)
    baud rate up to 115,200 bps
    Self-tuner for RS232
    IEEE 802.3af - PoE (PD)
    Supply voltage u / PoE: 12 - 48VDC 2Watt
    Dimensions: 90 x 52 x 27 mm
    DIN bracket
    Operating temperature: -25 - +75°C

    Price 1,675.00 DKK
    Product code: ETH-MODGW718-I
    On the way in  
  • MODBUS / TCP to serial RTU...

    MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x RJ45 1 x RS232 1 x RS485 isolated, -25 - +75°C, PoE, or 12 - 48VDC

    Compact Modbus / TCP to RTU / ASCII gateway with PoE
    not to be programmed
    1 x RJ45 10 / 100Mbps
    1 x RS232 (terminal block) - 5-pin
    1 x RS485 (terminal block ) - 2-pin
    baud rate up to 115,200 bps
    Self-tuner for RS232
    IEEE 802.3af - PoE (PD)
    Supply voltage u / PoE: 12 - 48VDC 2Watt
    Dimensions: 90 x 52 x 27 mm
    DIN bracket
    Operating temperature: -25 - +75°C

    Price 1,540.00 DKK
    Product code: ETH-MODGW724-I
    On the way in  
  • MODBUS TCP Server, RTU...

    MODBUS TCP Server, RTU slave to CANopen Master, 3 in 1 Gateway, 1 x RJ45, 1 x COM, 1 x CAN, -25 - +75°C, 10 - 30VDC

    Ethernet Gateway for CANopen networks and Modbus RTU
    1 x RJ45 10 / 100Mbps
    Protocol: Modbus TCP Server
    1 x RS232 / RS485 port (non-isolated)
    Modbus RTU slave
    Baud rate: 1200-115200
    1 x CAN port
    CANopen
    CAN Baud rate: 10K - 1M
    Built-in 120 ohm termination
    Dimensions: 122 x 72 x 33 mm
    Supply voltage : 10 - 30VDC, 2,5Watt
    Operating temperature: -25 - + 75 ° C
    DIN bracket

    Price Call for price
    Product code: M485-CAN-M-ETH-I
    Physically in stock  
  • RS232 / RS422 / RS485...

    RS232 / RS422 / RS485 Converter (Slave) to Can2.0 A / B Master. Modbus RTU slave to CAN. 10 - 30vdc.

    Module to Can 2.0a and B
    ISO 11898-2 standard
    Baudrate 10Kbps for 1M bps
    software for setting CAN and RS232 / 422/485
    Transparency between RS-232 / 485/422 Via CAN bus
    Full duplex on RS-232/422 units are not supported
    CAN Bus Baud Rate Configuration
    CAN Accept Filter Configuration
    CAN 2.0A or 2.0B Specific Choice
    RS-232 / 485/422 Baud rate and data file setting
    RS-232/485/422 Respond Options
    Setting: Normal or pair connection

    Price Call for price
    Product code: M485-CAN-IA-M
    On the way in  
  • RS232 / RS422 / RS485 for...

    RS232 / RS422 / RS485 for single mode fiber module. 15km, TX1310, RX1550

    Module A - Serial for Fiber - Fiber for Serial Link
    Automatic RS-485 Directional Control
    Optical Fibers Allows Transmission Up to 15 km to B Module
    Avoid lightning and EMI / RFI interference
    Supports +10 VDC ~ +30 VDC
    ESD protection for data line RS-232/422/485
    DIN rail mounting
    support operating temperatures from -25 ° C ~ +75 ° C

    Price 2,474.00 DKK
    Product code: M485-FIBER-AS
    On the way in  
  • RS232 / RS422 / RS485 for...

    RS232 / RS422 / RS485 for single mode fiber module. 15km, RX1310, TX1550

    Module B - Serial for Fiber - Fiber for Serial Link
    Automatic RS-485 Directional Control
    Optical Fibers Allows Transmission Up to 15 km to the A module
    avoiding lightning and EMI / RFI interference
    Supports +10 VDC ~ +30 VDC
    ESD protection for data line RS-232/422/485
    DIN rail mounting
    support operating temperatures from -25 ° C ~ +75 ° C

    Price 2,474.00 DKK
    Product code: M485-FIBER-BS
    On the way in  
  • Profinet to Modbus RTU /...

    Profinet to Modbus RTU / ASCII Gateway. Profinet Master to Modbus Slave. Also as Modbus Master

    PROFINET / MODBUS konverter Gateway
    PROFINET klasse B og RT klasse 1
    1 x RJ45
    Cyklisk tid: 1ms (min)
    Generisk GSDML-fil (version 2.25)
    Max længde af input/output data er 512/512 bytes
    Understøtter Modbus Master og Slave mode
    Understøtter Modbus RTU- og ASCII -format
    RS232 or RS422 or RS485
    Baud rate for COM1 fra 1,2 til 460,8 kbps
    LED-indikatorer
    4 kV kontakt ESD-beskyttelse til enhver terminal
    Strømforsyning: +10 til +30 VDC
    Driftstemperatur: -25 til +75°C

    Price 4,708.00 DKK
    Product code: ETH-PROFI-MOD-I
    On the way in  
  • Modbus for 2 x CAN Port...

    Modbus for 2 x CAN Port Gateway. CAN Bridge over network. Modbus TCP Server / Client. 10 - 30VDC, -25 to +75°C

    Support input voltage 10 ~ 30VDC
    Fully compatible with ISO 11898-2 standard
    1 x RJ45 Ethernet interface
    2 x CAN bus 9-pole D-sub
    Mechanical selection of CAN Bus Baud rate
    support for CAN bus ID filter function
    Support for CAN Bridge
    CAN Bus Monitoring
    CAN Baud Rate from 10Kbps to 1Mbps
    Modbus TCP Client / Server function Via Configuration
    Support for TCP / UDP CAN Pair Connection
    Bootloader for firmware updates
    Supply voltage: 10 - 30VDC
    Operating temperature: -25 to +75°C
    Dim: 147 x 107 x 26 mm

    Price 3,971.00 DKK
    Product code: ETH-CAN2-MOD-GW
    On the way in  
  • Can Open Slave for Modbus...

    Can Open Slave for Modbus RTU Master Converter / Gateway. RS232 or RS485 bus. -25 - +75°C.

    NMT Canopen Slave
    Modbus RTU Master
    Error Control: Node Guarding Protocol
    Node ID: Setting CAN_MRU Utility Software or LSS Protocol
    PDO modes: Eventless, externally requested, cyclic and acyclic Sync
    Bob Mapping: Variable
    Number of SDOs: 1 Server, 0 Client
    Canopen Version: DS-301 V4.02
    Device Profile: DSP-401 V2.1
    CIA DSP -305 V1.1
    Can Baud Rate: 10K - 1M BPS
    Modbus Baud Rate 1200 - 115,200 BPS
    LED indicators Run, Err and Overrun
    Max. 10 Modbus RTU I / O Modules
    Hiring program for configuration
    7-segment LED to display Node ID, Can Baud Rate and RS-485 Baud Rate

    Price Call for price
    Product code: M485-CANO-MOD-I
    On the way in  
  • MODBUS TCP/UDP for RTU...

    MODBUS TCP/UDP for RTU Gateway. Modbus TCP Master/Slave between Modbus RTU Master/Slave. 3 x RS485. 12-48VDC

    Supports Modbus TCP/UDP master and slave
    Supports Modbus RTU/ASCII master and slave
    Max. TCP connections (masters) per serial port: 32
    1 x RJ45 Ethernet
    3 x RS485 ports
    Max. 254 notes
    Max. baud rate: 115.2kbps
    12 - 48VDC / 1.7 Watts
    Dimensions: 95 x 52 x 27 mm
    Temp: -25 - +75°C
    Static IP or DHCP
    Web server for configuration (HTTP)
    Automatic RS-485 direction control
    Terminal blocks
    Cost-effective Modbus gateway

    Price 1,491.00 DKK
    Product code: ETH-MODGW735-I
    On the way in  
  • M-BUS master up to 20...

    M-BUS master up to 20 devices for MODBUS RS485 slave. PLC/PC with MODBUS master can read the M-BUS devices

    Protocol converter from M-BUS devices to PC/PLC which is Modbus Master
    Up to 20 M-BUS units (meters)
    RS485 Modbus interface for Modbus master
    Free setup software
    Supply voltage: 18 - 35VDC, 15 - 21VAC
    Max. power consumption: 4 Watt
    Baud rate: 1200 - 115,200 baud
    Galvanic isolation
    Temperature: -40 - +70°C
    Dimensions: 71 x 60 x 60 mm

    Price 3,950.00 DKK
    Product code: M485-MBUSM-MODBUSS
    On the way in