External COM port over Ethernet and Internet
RS232/422/485
Baud rate: 1200 - 230.4kbps (2-wire)
Max. baud rate at 4-wire RS485 up to 921.6kbps
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)

External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection

Up to 1.4 km over e.g. old telephone cable with 2 VDSL modules

Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+

Ethernet over 2-wire connection with VDSL

Ideal solution when the network distance is over the 100 meter limit

Ideal solution when a Wifi link is an unstable connection

Provides a transparent data connection

Supply: 5VDC, 2A power supply included

DIP switch: VDSL connection, one must be set to CPE and the other to CO.

Prepared for DIN mounting, wall mounting. DIN brackets are available separately.

SOLD INDIVIDUALLY! Order 2 pieces for a set.

Dimensions: 155 x 86 x 26 mm

Use 2 pcs. Eth-VDSL2 + for an Ethernet connection (Bridge)

up to 1.4 km Ethernet connection with 2 pcs. VDSL devices
Poe over 2-wire connection
1 x LAN 10/100 / 1000Base-T RJ45 Auto-MDI / MDI-X Port
1 x VDSL2 RJ11 She
Splitter for analogously Telephone connection included
Power supply: 54V / 0.74A included
POE + (30W) for eg. Access Point, IP camera.
Prepared for your mounting, wall mounting
Your fittings are purchased

PoE power supply via Ethernet cable, up to 30 watts

LAN without PoE input, provides LAN with PoE

For 10/100/1000Mbit network.

Power supply from 100 - 240VAC / 0.6A

4 port Gigabit network card
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
PCI express 2.1 x 4
4 x RJ45
For normal and low profile

For the interconnection of single mode and multimode fiber networks
1000Base-SX to 1000Base-LX, SM, 850/1310 nm
only to Gigabit fiber networks.

Connect Multimode fiber network with single mode fiber network
1 x 100Mbit Single Mode SC
1 x 100Mbit Multimode SC
Wavelength: 1310 / 1310nm
100Base-SX / LX fiber network
5VDC / 2A adapter included

Multimode version, 850 nm
connector: DB15 Han to Ethernet, ST connector for 10Base-FL
Option Purchase: Aui cable for DB15
Fiber: 62.5 / 125um Multi mode Duplex to 10Base-FL
Max. Length of DB15 Cable of 50m
2 km Max at Multi Mode Cable
0 to 55 degrees (Standard operation)
10 to 90% (non-condensing)
IEEE 10Base-5 / FL Ethernet
sqe on / off

REMAINDER SALE

4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature

Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x ST fiber 100Mbit Multi Mode
IP50

Unmanaged 5 port Ethernet switch

5 x 10/100/1000Mbit, RJ45

Operating temperature: -40 - +70 °C

12 - 56VDC

Wireless RS232 link between 2 RS232 ports.
Only supplied as a set (2 pcs.).
BT Ver 2.0+EDR, Class1
Up to 100 meters with included antennas at line-of-sight
Up to 1km with larger external antennas (additional purchase)
Automatic establishment of connection at power on
With frequency hopping to avoid interference
Baud rate: 1200 - 921.6kbps, 8 data bits, O/E/No, 1/2 stop bit
Setting up Baud rate etc. with DIP switches
RTS/CTS on/off - DTR/DSR/DCD loop-back
Supports multi-connection: 1 master to 4 slaves
Supply voltage: 5 - 12VDC/80mA

300 Mbps Dual Band WiFi Adapter
USB
Built-in Antenna
Supports 2.4 and 5 GHz
Windows XP (32/64-bit), Vista (32/64-bit),
7 (32/64-bit) and 8 (32/64-bit), Mac OS and Linux

Outdoor directional panel antenna, 18 dBi
Vertical spread is 18 degrees
Horizontal spread is 35 degrees
Mast bracket included
N she stick
Dimensions: 290 x 209 x 35mm

Udendørs retningsbestemt YAGI-antenne 7 dBi
Vertikal spredning er 40 grader
Horisontal spredning er 45 grader
Mastebeslag medfølger
N hun stik
300 x 100mm

Outdoor / indoor 2.4GHz omnidirectional antenna 7 dBi
Vertical spread is 18 degrees
Horizontal spread is 360 degrees
With RSMA he plugs into the bottom of the antenna
Height 24cm
Mast mounting with strips

2,4GHz SEKTOR / MIMO WiFi antenne 15 dBi
Vertikal spredning er 28 grader
Horisontal spredning er 120 grader
Højde 41cm
2 x N hun stik
Mastebeslag medfølger

Outdoor directional parabola antenna 19dBi
Vertical spread is 7 degrees
Horizontal spread is 8 degrees
Mast bracket - adjustable - included
N she stick
1070 x 610mm

Udendørs retningsbestemt panelantenne, 8 dBi
Vertikal spredning er 30 grader
Horisontal spredning er 75 grader
Vægbeslag medfølger
N hun stik
107 x 94 x 30mm