There are 20 products.
REMAINDER SALE
MiniGBIC / SFP optical transceiver
LC
1310 nm
Up to 50 km single mode
Multi-mode serial fiber converter (RS232 / RS422 / RS485)
With 2 units you can make a transparent serial bus over fiber cable.
Provides 100% galvanic isolation and transient protection
Long-range serial connection (5km)
Purchase power supply (12 - 48VDC or 12 - 32VAC)
The cable connection is with screw terminals, fiber cable with ST
REMAINDER SALE
Unmanaged 5 port industrial switch
4 x RJ45 10/100 Mbit
1 x ST fiber 100Mbit Multi Mode
IP50
Unmanaged 6 ports industriswitch
6 x RJ45 10/100Mbit
IP67 tæt kabinet - vægmontering
REMAINDER SALE
Korenix Jetcard 2215
4-port 100 Mbit PCI network card with Switch and PoE
External COM port over network connection
serial port via db9 male
2 x RJ45 network connections
External COM port via Ethernet and Intenet - for fiber cable
Device server with multimode fiber and RS232 / 422/485 port
External COM port via Ethernet and Internet - for fiber cable network switch
Device server with single mode fiber and RS232 / 422/485 port
REMAINDER SALE
JetCard 1404i 4 x isolated RS422-485
With 2 KV optical isolation
US SUPPORT
Windows 98/Me/NT/2000/XP/2003, Win 7 32bit
Linux RedHat Enterprise 4.0 (2.6.9)/RedHat Enterprise 3.0 (2.4.21)
RedHat 9.0 (2.4.20)/RedHat 8.0 (2.4.18)/RedHat 7.3 (2.4.18)
RedHat 7.2 (2.4.7)/FC5(2.6.16)/FC3(2.6.9)/ FC2(2.6.5)/FC1(2.4.22)
Mandrake 10.1(2.6.8)/Mandrake 9.2 (2.4.22) Regulat
REMAINDER SALE
4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature
Unmanaged 8 x 10/100Mbit switch
Power redundancy
Broadcast storm packet filter
Event alarm
Dual DC10~48V power inputs
Aluminum case with IP31 grade protection
Operating temperature -25~70oC
10/100 Mbit copper Ethernet for SC multimode fiber Ethernet converter
Up to 2 km (50 ~ 62.5 / 125 µm fiber)
12 ~ 48 VDC, 4.6 W
-10 ° ~ + 70 ° C for DIN mounting
REMAINDER SALE
Serial card JetCard1208L
PCI - Low oh high backplane
8 x RS232
Up to Win 7 (32bit)
REMAINDER SALE
JETBOX 8210D+CF2G-CC
REMAINDER SALE
The EPC-SER2L2 is a compact PC with Embedded Linux that offers many possibilities of use.
Examples of use could be:
- FTP server with 2 network connections, which can utilize local network speeds for uploading files.
- Firewall, proxy server and NAT using the software iptables.
- Built-in GoAhead web server. Files for the web server are placed on a micro SD card and mounted.
- Serial port server with ser2net.
JETNET 4008F-S 8-ports switch
Korenix JETI / O 6511
Network module with 8 x analog inputs
Channels: 8
Resolution: 16 bit
Analog inputs: ± 150 mV, ± 500 mV, ± 1 V, ± 5 V, ± 10 V and ± 20 mA
Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface to the power supply
10/100 Mbit m / RJ45 female connector
Operating temperature: - 25 ° C - 70 ° C
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block. Max 3.2 W
REMAINDER SALE
1 port compact 10/100 TX to 100FX media converter
LLF color detection technique
Compliance with IEEE 802.3 / IEEE 802.3u standards /
IEEE 802.3x standards
Supports 19" 3U 16 slots chassis mounting, Rack-1001/1002
JetCon 1501T 10 / 100Base-TX to 100Base-FX, ST connector,
Multi-mode 2KM
Ethernet module with 8 x analog inputs
Channels: 8
Resolution: 16 bit
Analog inputs: ± 150 mV, ± 500 mV, ± 1 V, ± 5 V, ± 10 V and ± 20 mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs in relation to the power supply
Magnetic 1500 V from network interface to the power supply
10/100 Mbit m / RJ45 female connector
Operating temperature: - 25 ° C - 70 ° C
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 3.2 W
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
