Test Equipment / Programmer / Logic

DANBIT has a large selection of test equipment and in this category exists;

Fiber tests, cable tests, camera tests, network tests, PoE tests, RS232 tests, screen tester, microscopes, power meter, multimeter, signal strength meter, range finder, thermal camera, universal applications, IC programs, logic analysis and analysis software.

Test Equipment / Programmer / Logic

There are 39 products.

Showing 1-20 of 39 item(s)

Active filters

  • Cable tester for fiber...

    Cable tester for fiber cables with LC connector. Tester fiber breakage and review. The cable lights up when it is defective

    The fiber cable tester for LC / MU connectors.
    This type of fiber has a tip diameter of 1.25 mm
    Test residue tip suitable for fiber cables with a tip diameter of 1.25mm
    Transmitter visible light through the fiber
    Tester fiber cable with LC connectors at both ends
    Tester Pigtail fiber with LC in one end
    Cable will light up when there is a rupture or crack.
    in a healthy cable the light is seen only in the opposite end of the fiber cable.

    Price 1,383.00 DKK
    Product code: TEST-FIBER-LC
    On the way in  
  • Digital multimeter with LCD...

    Digital multimeter with LCD display, AC / DC

    Simple and compact digital multimeter with LCD display
    DCV measuring range: 300V, 200V, 20V, 2V 200mV
    ACV measuring range: 300V, 200V
    DCA measuring range: 200mA, 20mA, 2mA, 200uA
    Resistance measuring range: 2MΩ, 200KΩ, 20KΩ, 2KΩ, 200Ω
    Diode / Continuity measurement
    Battery: 9V (included, not installed)

    Price 271.00 DKK
    Product code: INST-MULTI
    Physically in stock  
  • Digital multimeter with...

    Digital multimeter with numbers and graphic display, automatic change of measuring range, discontinued model!

    Multimeter with clear multi display
    Note does not have an interface for a PC (although there is a port for it)
    EOL product limited stock
    DC Voltage: 400mV 0.5% +2dgts 4V to 1000V 0.8% +2dgts
    AC Voltage: 4V to 750V 1.5%+3dgts(40~500)
    DC Current: 400 to 400 1.0%+2dgts 20A 2.5% +3dgts
    AC Current: 400 to 4 1.0% + 5dgts(40~500), 40 to 400 1.5% +5dgts(40~500), 20A 3.0% +4dgts(40~500)
    Resistance: 400 to 400, 0.8% +2dgts, 4 1.0% +4dgts
    Capacitance: 4 to 400 2.0% + 5dgts,  4 to 40 3.0% + 5dgts 200 5.0% + 5dgts
    Frequency: 4 to 4 0.1% + 1dgts
    Temperature: -40C ~ 20C 3.0% + 5dgts,  200C ~ 1200C 3.0% + 2dgts
    Logic: Three logic level (Low,---, Hi)
    Continutiy: Buzzer sounds of Resistance less than 800 
    Diode: Yes
    hFE: Yes
    Signal_out: 1 ~ 10 (13 steps)

    Price 300.00 DKK
    Product code: PC-INSTR5USB
    Physically in stock  
  • Digital pH meter with LCD...

    Digital pH meter with LCD display

    Measurement range: 0.00-14.00pH
    Resolution / accuracy: 0.01pH
    Calibration: Automatic 3-point calibration 6.8 & 4.00 & 9.18pH
    Temperature: 0-60 ° C
    Humidity: 100%

    Price 206.00 DKK
    Product code: INST-PH
    Physically in stock  
  • Digitalt pen type...

    Digitalt pen type multimeter with LCD display

    Simple and compact digital pen type multimeter with LCD display
    DCV measuring range: 600V, 200V, 20V, 2V 200mV
    ACV measuring range: 600V, 200V, 20V, 2V
    DCA measuring range: 200mA, 20mA
    ACA measuring range: 200mA, 20mA
    Resistance measuring range: 20MΩ, 2MΩ, 200KΩ, 20KΩ, 2KΩ, 200Ω
    Diode / Connection measurement
    Built-in LED lamp
    Battery: 2x1.5V AAA (not included)
    Dimensions: 225 x 38 x 26 mm

    Price 526.00 DKK
    Product code: INST-MULTI-PEN
    Physically in stock  
  • Fiber Cable Tester. Check...

    Fiber Cable Tester. Check fiber cable for breakage and review. The cable lights up where there is a defect. To SC / ST / FC

    Fiber cable tester for SC / FC / ST / E2000 plug types
    The tip of these fiber cables a 2.5mm
    The tester's tip fits fiber ends with a diameter of 2.5mm
    Sending visible light through the fibers.
    In case of fracture, the fiber cable will light up on the spot.
    By healthy cable, light is visible at the opposite end of the fiber

    Price 1,352.00 DKK
    Product code: TEST-FIBER-UNI
    On the way in  
  • Fiber tester - all in one....

    Fiber tester - all in one. Tests fiber cables for throughput losses. For SFP modules. For 4 wavelengths.

    Fiber Tester. Measures how much loss there is in a fiber cable at the selected wavelength
    3 x SFP ports (2 x Light Source, 1 x Power Meter)

    SFP modules included:
    650mm FP SC SFP
    850mm VCSEL SC SFP
    1310mm FP SC SFPT
    1550mm FP SC SFP
    FiTs Meter Module SC 850/1310/1490 / 1550mm
    Purchase remote module TEST-FIBER-PM for measuring on mounted fiber cables

    Price 11,372.00 DKK
    Product code: TEST-FIBER-PM-LS
    Physically in stock