RFID / Barcode / Magnet stribe / TAGs / POS

Outdoor UHF RFID reads and writes
for Passive UHF 865MHz TAGs
TAG protocol: EPC Class 1 Gen 2
ISO 18000-6C
Reading/writing is controlled via software commands
Software App Platform: API (C ++, C #) Development Kit
Up to 10 m Reading distance, depending on UHF Tag
built-in 8DBI antenna, circular polarity
IP67 Plastic cabinet
Operating temp: -40 - + 75 ℃
150 ~ 240VAC / 50Hz adapter with 12VDC / 3A out
Dim: 259 × 259 x 100mm (L × B × H)

Fanless POS Terminal
IP54 tæt i aluminiums kabinet
Intel Atom processor (1.6Ghz / Dual 1.8GHz)
DDR2 / DDR3 RAM Module (op til 4G)
15" touch screen, IP54 tæt
Med væg eller VESA montering
MSR / Customer Display / 2nd VGA Display
I/O porte med 1 x Gigabit LAN

Reading distance: Up to 100cm
RFID tag: ISO 18000-6C
Operating frequency: 865 – 868 MHz
Mode: Single Read / Multiple-tag Read
Bluetooth® 2.1 + EDR (Class2)
Interface: BT HID, BT SPP, USB HID, USB VCP, Memory
Rechargeable lithium battery
Working Temperature: -10 to 55˚C
Wireless Multi-Connected Dongle (Optional)

866 - 868MHz CE, equipped with 12dBI linear antenna
EPC Class 1 gene 2 (ISO18000-6C)
from 0 ~ 20 meters reading distance (depending on the surroundings)
from 0 ~ 7 meters of writing distance ( Depending on the surroundings)
Linux OS, Indy R2000 RFID chip, fast and precise reading rate
Ethernet connection
445 × 445 × 100 mm (l × W × H)
Operating temperature: -20 ~ + 60 ° C
IP65
Option: RS232 / 485, USB, GPIO, Wiegand 26/34, 4G LTE and WiFi
Option: Poe

Fanless
4 x COM (DB9, with power output, +5VDC/+12VDC, selectable by Jumper)
2 x COM (Internal, reserved for VFD Customer Display and MSR)
1 x DB25 Parallel Port
5 x USB 2.0 (External, 4 x bottom/ 1 x side)
RJ-45 Gigabit LAN
VGA
1 x 12VDC (Output) Jack for Customer Display or 2nd Display
1 x RJ-11, +12/+24 VDC (Cash drawer)
+12VDC 60W, 4-pin Connector with Lock
355 x 302 x 204 mm

Reading distance: Read > 500cm, Write > 20cm
RFID tag: ISO-18000-6B, ISO-18000-6C
Operating frequency: 865-868MHZ, 902-928MHZ
Bluetooth 4.0, USB 2.0
RF output: 18~26 dBm(adjustable)
Rechargeable lithium battery
Standby time 150 Hours
Working Temperature -20C°C to +50°C
Windows, Android, iOS, Mac OS

Support for setting up PAY terminals.
You will be guided through Nayax portal and get help to set it up your first terminal.
Limited to two hours

Personell who shall document the route with the date and time
RFID TAGs placed at check-points and has unique ID
RFID TAG is 125kHz EM400X
guard pointing toward Days and press the scan button
Each TAG reading acknowledged with short vibration
Operation with a pressure
Journal memory: approximately 14,000 items
battery - easy to replace
up to 55,000 scans at full battery
interface is USB
Operating temperature: -10 to + 55 ° C
Patrol Tour Manager software included

IC / RFID / MAGNET motor card reader
USB interface
3 in a card reader
Automatic card operation from 2 pages
For example. parking lots, payment terminals, kiosk etc.
4 PIN PSU interface

Hurtige termiske bonprinter til ethernet

Seiko Instruments RP-E11-K3FJ1-E-C5, POS, Termisk, 350 mm/sek., 8,3 cm, 5,8 cm

For passive UHF tags 865MHz
Supports ISO18000-6B, ISO18000-6C
RF power: 0.1 - 1 Watt
TAG reading is controlled via software commands
Interface: RS232, RS485 and Wiegand 26/32
Circular polarized antenna
RS-232, RS-485, Wiegand 26Bits/32Bits
5V DC power supply / 2 Watt
Dimensions: 220 x 220 x 50 mm
Weight: 1.5 kg
IP65

MDB Master / Slave Controller via USB
Simple API for integration
can function as VMC or payment terminal
USB-COM Port ACM Driver
Built-in relay, can be controlled via command
Power supply via USB or MDB
Does not provide power output on the MDB port
Technical demanding product - Support for setup / integration can be purchased

Hurtige termiske bonprinter til USB

USB 2 x PC splitter
2 x DB9 special cable output (DB9 to USB)
1 x RS232
USB Power (5VDC)
Speeds from 1200bps to 115200bps with select
OS support: Windows OS, MAC OS X, Linux
Incl. 2 pcs. DB9 male to USB-A male cable 1,2m
Operating temp. 0 - + 50 ° C

Kvitteringsprinter
Termisk
Stikdæksel
Hovedapparat
Dæksel med aktiveringsknap
Rullepapir
Styreplade til 58 mm bredt papir
PS-180 & AC-kabel

Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC

Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply

Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply

ST STM32 32-bit CPU with 512K Program flash RAM
2M Byte SRAM (1MB lookup table), 4M Bytes Flash RAM (For Font)
1 MB or 35,000 records Seite 128 x 128 dots graphic FSTN LCD display with blue backlight
Dual Color (Red / Green) LED Indicator
RS232 and USB virtual RS232 Seite 120 ~ 80 scans per second
Rechargeable Lithium Battery Pack (1700 mAh / 3.7V)
3.0V, 18mAh, MaxeII ML, Rechargeable Lithium battery for SRAM
Operating hours: Up to 24 hours and 28,000 scans
Certifications: FCC / CE / WEEE / RoHS
Weight: 175g
dimensions: 145 x 64 x 31
Operating Temperature: 0 ° C ~ 45 ° C
OS Support: Windows-based (98 / Me / 2000 / XP / Vista / Win 7 / Win 10)