POS - Point of Sales

POS - Point of Sales

There are 34 products.

Showing 1-34 of 34 item(s)

Active filters

15" POS Panel PC, ATOM CPU,...

15" POS Panel PC, ATOM CPU, All-in-one, blæserløs

Fanless POS Terminal
IP54 tæt i aluminiums kabinet
Intel Atom processor (1.6Ghz / Dual 1.8GHz)
DDR2 / DDR3 RAM Module (op til 4G)
15" touch screen, IP54 tæt
Med væg eller VESA montering
MSR / Customer Display / 2nd VGA Display
I/O porte med 1 x Gigabit LAN

Price 12,610.00 DKK
Product code: IPP-POS15N270
On the way in  
  • Fanless 15″ Touch POS...

    Fanless 15″ Touch POS Terminal, 2.0GHz, 12VDC

    Fanless
    4 x COM (DB9, with power output, +5VDC/+12VDC, selectable by Jumper)
    2 x COM (Internal, reserved for VFD Customer Display and MSR)
    1 x DB25 Parallel Port
    5 x USB 2.0 (External, 4 x bottom/ 1 x side)
    RJ-45 Gigabit LAN
    VGA
    1 x 12VDC (Output) Jack for Customer Display or 2nd Display
    1 x RJ-11, +12/+24 VDC (Cash drawer)
    +12VDC 60W, 4-pin Connector with Lock
    355 x 302 x 204 mm

    Price 8,511.00 DKK
    Product code: IPP-POS15
    On the way in  
  • Payment system with 2 units...

    Payment system with 2 units for contactless card, chip, magnetic stripe and MobilePay

    Payment system for vending machines, doors etc.
    Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
    GSM (SMA) and LAN (RJ-45)
    2 x digital outputs. & nbsp;
    1 x deaktiveringsindgang. Can be configured to deactivate the machine
    Can be connected to a vending machine, washing machine, door, etc.
    Web-based control panel, can be operated over the Internet
    Support for setup can be purchased
    Comes with SIM card
    User agreement with service provider is required

    Price Call for price
    Product code: PAY-N-VPOS+AMIT
    Physically in stock  
  • Payment terminal with touch...

    Payment terminal with touch display for contactless cards, chip, magnetic stripe and mobilepay

    NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

    Payment system with touch display.
    accept contactless, chip, magnetic stripe and mobilepay.
    GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
    can be connected to a vending machine, washing machine, door, etc.
    Web-based control panel.
    Communications Internet or WiFi or 4G
    Support for setup can be purchased.
    Supplied with SIM card (4G)
    Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

    Price Call for price
    Product code: PAY-N-VPOS-TOUCH
    Physically in stock  
  • 5V relay circuit board, 1...

    5V relay circuit board, 1 channel

    Module with 1 relay output
    5VDC from optically isolated digital input
    GND, VCC, IN (digital input)
    COM, NC, NO
    Max load: AC 250V / 10A DC 30V / 10A - non inductive load!

    Price 250.00 DKK
    Product code: REL5V1
    On the way in  
  • Pay terminal with touch...

    Pay terminal with touch display for contactless cards and mobilepay, pulse or MDB interface

    BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!

    Betalingssystem med touch display.
    All-in-one med POS og Data-kommunikation i samme hus
    Accepterer kontaktløse kort og MobilePay.
    GSM antennestik MMCX stik
    6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
    6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
    Konfigureres via platform med priser og funktioner
    Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
    Web-baseret eller MQTT Cloud
    Kommunikation: LAN eller 4G
    Support til opsætning kan tilkøbes.
    Leveres med SIM kort klar til funktioneopsætning
    Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

    Price Call for price
    Product code: PAY-N-ONYX
    Physically in stock  
  • Support for setting up PAY...

    Support for setting up PAY terminals

    Support for setting up PAY terminals.
    You will be guided through Nayax portal and get help to set it up your first terminal.
    Limited to two hours

    Price 6,930.00 DKK
    Product code: PAY-N-OPSÆTNING
    On the way in  
  • Simple MDB to USB...

    Simple MDB to USB converter, MDB Master / Slave, USB Host / Client

    MDB Master / Slave Controller via USB
    Simple API for integration
    can function as VMC or payment terminal
    USB-COM Port ACM Driver
    Built-in relay, can be controlled via command
    Power supply via USB or MDB
    Does not provide power output on the MDB port
    Technical demanding product - Support for setup / integration can be purchased

    Price 4,066.00 DKK
    Product code: CNV-MDB-USB-S
    Physically in stock  
  • Dual electric car charger...

    Dual electric car charger with payment terminal, electricity tax return with CVR number. in Denmark

    Universal electric car charging stand for all EV vehicles
    Allow two electric cars to charge at the same time
    Smart design
    Dynamic management of charging
    Interface protocol: OCPP 1.6
    Payment for parking and charging by payment card
    Monthly fees apply
    AC Input 230-400 VAC +/- 10 (2 or 3 phase)
    Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
    Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
    Communication: 4G
    IP degree: IP55
    Operating temperature: -25 C° to 55 C°
    Dimensions: 520 x 360 x 260 mm
    Charger cable not included. The user uses the cable that comes with their car.

    Price Call for price
    Product code: EV-DUO-PAY
    Physically in stock