Mini media converter box / cabinet to 12 media converters, rack-mount, dual power AC 220V
12 mini slots media converter box / casing
1U rack mounting | 1/10 / 1000M
Dimensions: 485 (W) x 270 (D) x 44.5 (H)
Operating temperature: 0- 50
Convert copper cable data communications to optical fiber cable data communication and display versa with a media converter.
A media converter is a simple network device that makes it possible to connect two different types of media, in this case copper network cable with fiber optic cables.
When selecting a media converter, it is very important that the converters at each end of the fiber cable are...
Convert copper cable data communications to optical fiber cable data communication and display versa with a media converter.
A media converter is a simple network device that makes it possible to connect two different types of media, in this case copper network cable with fiber optic cables.
When selecting a media converter, it is very important that the converters at each end of the fiber cable are identical . It just means that they have to run at the same speed, eg. 100Mbit or 1000Mbit Gigabit media converter. They must also fit the fiber cable and the fiber plug. There are 3 standard fiber cable types. Single Mode: 9 / 125my. Multi Mode is either 62.5 / 126my or 50 / 125my.
Media converters can be with fiber connectors - ST, SC, LC mm. Almost everyone has transmitter and receiver plugs (RX / TX) and the data stream is simultaneous - called duplex. Most media converters are with insert slot for SFP module (GBIC) available in many variants, and here the choice must be considered with care. Some media converters can communicate over 1 fiber (simplex), and here the SFP module must be of the WDM type (Wavelength Division Multiplexing), which means that the transmitter (TX) is a (light) wavelength 1310nm and the receiver (RX) is on 1550nm. The WMD Media converter at the other end of the fiber cable has TX of 1550nm and RX of 1310nm. This means that the 2 data streams in this simple fiber do not interfere with each other. It also means that there can be twice as many media converters as normal. Fiber cables is available from a single fiber to fiber cables with an incredible number of single fibers.
Media converters are also available with PoE on the RJ45 connector and can power an IP camera via the network cable. Media converters are also available with 2 fiber ports and an RJ45 port. The purpose is to be able to connect a Single Mode fiber network with a Multi Mode fiber network and at the same time have an RJ45 connection to one device.
Media converters are available as un-managed - only standard function to connect RJ45 with a fiber cable.
Media converters available as managed - have the ability to customize.
Subcategories
There are 35 products.
12 mini slots media converter box / casing
1U rack mounting | 1/10 / 1000M
Dimensions: 485 (W) x 270 (D) x 44.5 (H)
Operating temperature: 0- 50
10 / 100Base-T to 100Base-FX duplex multi mode
Multi mode up to 2km
SC - 50my and 62,5my - 1310nm
Temperatur: -40 - +75°C
5VDC PSU included.
Media Converter 100Mbit Multimode ST duplex - 2km
1 x RJ45 10 / 100Mbit
1 x ST 100Mbit
1310nm
5VDC
Dimensions: 97 x 69 x 26 mm
1 x 10/100/1000Mbit RJ45
1 x 1000Mbit SFP (only for Gigabit SFP modules)
up to 80km with Single Mode fiber
up to 550m with Multi Mode fiber
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
BIDI with LC or with SC (Simplex fiber)
Purchase additional Gigabit SFP modules.
up to 100m with Cat.5e or Cat.6
5% to 95% humidity
5VDC power supply included
-0°C to +70°C
DIN-mounted super compact media converter
100 Mbit fiber (additional purchase SFP module)
RJ45 10/100 Mbit
Ideal for installation in camera housings or where space is tight
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode
SFP modules - see under Accessories
Supply voltage: 12 - 60VDC or 18 - 36 VAC
Temperature range: -40° - +75° C
5% to 95% humidity
36 x 59 x 49mm (H x W x D)
DIN bracket included
100Mbit fiber media converter to RJ45, Single Mode
1 x RJ45 10 / 100Mbit | 1 x SC 100Mbit Singlemode
1310nm
up to 35 km
Media converter 1000Mbit Multi Mode SC duplex, 550 meters
10/100/1000Base-TX to 1000Base-SX, 850 nm
Multi Mode fiber cable (50/125 µm or 62.5/125 µm)
10/100/1000Base-TX to 1000Base-LX
1310 nm, Single Mode
Up to 10 km
Uses singlemode fiber cable (9/125 µm)
Only for 1000Mbit fiber, Single Mode
10/100 / 1000Base-TX for 1000Base-LX single mode, 15km
WDM wavelength-division-multiplexing - Simplex fiber cable only
Must be WDM convert at both ends of the fiber.
Media converter for 100/1000Base-X SFP module
Can power equipment with PoE+
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
56VDC PSU included.
Mid-span PoE (PSE) (4.5/7.8)
PoE power is max. 30 Watt
Alarm in case of link failure
WDN media converter for 1-core fiber, Singlemode SC.
1 x RJ45 10/100 / 1000Base-TX | 1 x 1-core (simples) single mode fiber with SC
Must be used with ETH-RJ45G-WDM SA
Up to 15 km
WDM wavelenght-division-multiplexing - only for simplex fiber cable
Must be WDM converter at both ends of the fiber
Media converter for 100Mbit Multi Mode Fiber SC
RJ45 10/100Mbit
Fiber 100Mbit 62.5/125my and 50/125my
-40 to +75°C
12 - 48 VDC Redundant PSU input
100/1000Mbit fiber media converter RJ45
1 x RJ45 10/100/1000Mbit BASE-T
1 x SFP slot 100 / 1000Mbit BASE-X dual mode
Supports WDM SFP modules (Bi-Directional data 1 on fiber)
WDM SFP module have wavelengths 1310nm and 1550nm
IEEE 802.3 / 802.3u / 802.3ab / 802.3z
IP30 metal housing
DIN rail and wall mounting design
Supply voltage: 12VDC to 48VDC polarity protected
AC supply voltage: 24VAC / 50Hz
PSU not included
Operating temperature: -40°C to +75°C
100 / 1000Mbit Media Converter with extended temperature
1 x RJ45 10/100 / 1000BASE-T
1 x SFP slot 100 / 1000Mbit
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
Supply voltage: 9 - 48VDC redundant power
Can also be connected to 24VAC
consumption: 2Watt
Power not supplied
Dimensions: 104 x 70 x 30 mm
IP30 metal housing
DIN rail and wall mounting
Weight: 251G
operating temperature -40 to +75°C
Media converter for 100/1000Base-X SFP transceiver
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
24V / 48V DC power input for PoE
Supply voltage can be 24VAC
Mid-span PoE (PSE) (4.5/7.8)
PoE power out is max. 30 Watt
Alarm in case of link failure
For DIN rail mounting
Replaced by ETH-RJ45G-SFP2
1000Mbit Media converter can connect 2 different fiber networks and RJ45
Is suitable as a node in Gigabit fiber networks with 1 x RJ45
1 x RJ45 10/100/1000Mbit
2 x 1000Mbit SFP slot for SFP modules Single Mode and/or Multi Mode
Can also connect Single Mode networks with Multi Mode networks
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
5VDC power supply included
Media converter for 100/1000Base-X SFP transceiver
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
1 x RJ45 10/100/1000Base-TX PoE+
1 x SFP 100/1000 Mbit
Power supply: 48-56VDC
PSU not included
End-span PoE (1/2(+), 3/6(-))
PoE power is max. 36 Watt
DIN rail or wall mounting
Temperature: -40 to +75°C
Dimensions: 30 x 70 x 104 mm
1000Mbit Multimode Media Converter for RJ45
1 x RJ45 10/100 / 1000BaseT
1 x 1000BaseSX / LX with SC connector Multimode
Back-Pressure in Half-Duplex
Auto MDI / MDI -X function in Store-and-forward mechanism
Up to 220m / 550m
Dimensions: 97 x 70 x 26 mm
Operating temperature: 0 - + 50 ° C
Power supply: 5VDC / 2A included
IP67 sealed media converter, ideal for Camcorder, AP etc.
1 port 1000Mbit fiber SFP slot
SFP slot for Single Mode or Multi Mode optical transceiver
1 port 100/100/1000Mbit RJ45
Autodetection of PD equipment (devices that must be powered by PoE)
PoE+ out: 30Watt
End-span: + on 1/2, - on 3/6
IK10 rated for vandal protection
6kV ESD protection
Supply voltage: 24 - 56VDC (Terminal block)
Temperature range: -40 - +75°C
Plug and Play
Dimensions: 170 x 44 x 73 mm
Wall mounting
AUI converter for UTP cable, external supply
1 x DB15 AUI female 10 Base-5 (AUI)
1 x RJ45 female 10 Base-T
Max cable length: 500m max per (Thick Ethernet), 100m max per UTP cable
LED: POWER, COL, LINK, TP / RCV
IEEE 802.3 10Base-T / AUI Ethernet
IEEE 802.2 10Base-T/10Base-2
FCC Class A Subpart B or Part15 Requirement