Filter By

Vejeceller

A load cell is a transducer which generates an electrical signal whose size is directly proportional to the force transducer is affected by.

a load cell may take many forms in steel, aluminum, where the choice of material allows the load cell the ability to tolerate the push and pull, without deforming. On the metal structure is glued strain gauges forming a Wheatstone bridge. It is the mechanical tensile and compressive...

A load cell is a transducer which generates an electrical signal whose size is directly proportional to the force transducer is affected by.

a load cell may take many forms in steel, aluminum, where the choice of material allows the load cell the ability to tolerate the push and pull, without deforming. On the metal structure is glued strain gauges forming a Wheatstone bridge. It is the mechanical tensile and compressive stress as change resistors in the Wheatstone bridge. A special roads amplifier connected to the Wheatstone bridge and provides an output to a display device or computer. A vejecelles quality is the result of extensive experience, choice of materials, material stress relief and extremely precise workmanship.

Load cells - Precise and reliable load cells

Vejeceller

There are 38 products.

Showing 1-20 of 38 item(s)

Active filters

  • Loadcell 10 kg

    Loadcell 10 kg

    Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg

    Price 1,506.00 DKK
    Product code: BAB10
    On the way in  
  • Interface Single Point...

    Interface Single Point weighing cell, 75 kg

    Overload protection: ± 200% of rated load
    Temperature:
    Range with temperature: -10ºC to + 45ºC
    Temperature in use: -55ºC to + 90ºC
    Output Signal: 3.00 mV / V (nominal)
    Voltage supply: 15 VDC
    Cable length: 1.5 m
    Dimensions: 155.4 x 73 x 31 mm
    Weight: approx. 875 g
    Linearity: ± 0.02% of nominal load
    Hysteresis: ± 0.02% of nominal load
    Reproducibility: ± 0.01% output

    Price 4,035.00 DKK
    Product code: SPI150
    Physically in stock  
  • SMT Overload Protected...

    SMT Overload Protected S-Type vejecelle

    SMT Overload Protected S-Type Load Cel

    • Proprietary Interface temperature compensated strain gages
    • Overload protected in both tension and compression
    • Safe overload to 10X capacity
    • High performance
    • Low creep
    • 1 to 450 lbf
    Price 7,051.00 DKK
    Product code: SMT-1-10N
    Physically in stock  
  • Last cell 20 kg

    Last cell 20 kg

    Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg

    Price 1,640.00 DKK
    Product code: BAB20
    Physically in stock  
  • Loadcell 50 kg

    Loadcell 50 kg

    Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg

    Price 1,640.00 DKK
    Product code: BAB50
    Physically in stock  
  • Lastcellen 1 ton

    Lastcellen 1 ton

    Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg

    Price 3,408.00 DKK
    Product code: CR1000
    Physically in stock  
  • Lastcell 2 ton

    Lastcell 2 ton

    Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 2000 kg

    Price 3,508.00 DKK
    Product code: CR2000
    Physically in stock  
  • Lastcell 500 kg

    Lastcell 500 kg

    Tryck cellrad m / M10 x 1,5 gänga; Full belastning = 500 kg

    Price 2,321.00 DKK
    Product code: CR500
    Physically in stock