Video extender, AV splitter, AV/ converter, Video Wall

HDMI, HDCP and DVI compatible 32 x 32 MATRIX
Modular - input and output modules
Input and output modules can be mixed and added to 8 × 8 input module and output module
4 input and 4 output modules with HDMI, DVI
VGA module is only input
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
480i to 1080p and 4K2K @ 24/25/30 Hz
Control of the matrix via the front panel, RS-232, Telnet, WebGUI controls
10 available preset settings
3 EDID modes: Standard, Dynamic and Manuel
Power supply with redundancy
HDMI cable up to 15 m
HDbaset 5Play ™ convergence support HD video, HD audio, PoC
Ethernet and IR / RS-232 control

Controller / video wall / splitter
Input: 1x Display Port, 1x HDMI + 1 Loopout, 1x DVI
Output: 4x HDMI
Supports HDMI, DVI, Display Port, VGA and YPbPr signals
4K / 2K HDMI
4K image split in 4 x HDMI outputs
PIP (picture in picture) and POP (side by side) multi function
HDMI audio
Supports YPbPr video via VGA input port as well as DVI-D, VGA & amp; HDMI by DVI-I input port
High end 3D motion
Managing via remote or RS232port

DVI-D og USB2.0 KVM-extender over netværkskabel
Punkt-til-punkt DVI-video og USB
Op til 100 meter over et enkelt CAT 5e / 6 / 7-kabel
Ukomprimeret HD-video med 1920 x 1200 opløsning
24-bit farvedybde
USB 2.0 op til 40 Mbps
ExtremeUSB® extender
Transparant USB overførsel
Maks. forsinkelse er op til 1ms
Plug and Play; ingen softwaredrivere kræves
Fungerer med operativsystemer fra: Windows®, OS X® og Linux®
Monteringskit: gør det muligt at montere enheder på vægge, skriveborde eller 19″ stativer.

4 x HDMI inputs to 4 x HDMI outputs
Viewing the screens 4 are summarized on a screen
display screen 1 distributed over 4 skærme
Can used with DVI adapters

Video Bandwidth: 225 MHz / 6.75 Gbps to 8 x HDMI female 
Resolutions: 480i to 1080p
Audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
Outputs 8 x HDMI
8 x uncompressed AV and data

DisplayPort KVM extender, 4K@30Hz and HD
100 - 150 meters with Cat. 6a patch cable (need good quality cable!)
4 x USB 2.0 ports on remote module
1 x USB B on local module
Transparent USB for K/M, USB drive, HDD etc.
4K@30Hz, 1080p@60Hz etc.
Independent two-way audio transmission
HDCP Compliant and Blu-Ray
Point-to-point cable connection
HDBaseT 2.0: Good EMI immunity
Supply voltage: 5VDC / 2A PSUs included
Dimensions: 110 x 110 x 30 mm
Operating temperature: -10 - + 45°C

HDMI KVM transmitter / receiver over networks
set with 1 x Transmitter and 1 x Receiver
with USB - Works with Touch screen
4K UHD HDMI over IP connection
Networkswitch must be with IGMP Snooping
Up to 120m Via Single RJ45 Cat 6 - Point to Point
Up to 60km (Single Mode) via Fiber Cable - Buying SFP Module
USB2.0 - Keyboard, Mouse and Touch screen, USB Memory, etc.
a transmitter to multiple recipients, multiple transmitters for multiple recipients
The devices can be used for Video Wall (8 x 16)
HDCP 1.4 Compatible
2 x 5VDC 1A Power Supply included

Display of 4 screens assembled on one screen
More image combinations
Remote control
4 x HDMI inputs
1 x HDMI output 1080p
PIP and POP functions
hot-Preset keys, IR remote
Can be controlled from the RS232, Telnet and push buttons on the front

8 channel HDMI input module for Video MATRIX 
Video bandwidth: 225 MHz / 6.75 Gbps
Input ports: 8 x HDMI
video resolutions: 480i to 1080p @ 60Hz
Audio LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
integration module - plug-in

Perfect table box to the meeting room for viewing on a large screen
can be mounted under the table
6 x video inputs selected for 1 x output
4 x HDMI input
1 x DisplayPort
1 x VGA + audio
1 x HDMI output for local monitor
1 x RJ45 for remote receiver with HDMI out (extras)
Sending of CAT6a cable up to 100m in HD 1080p
4K UHD (3840 x 2160) up to 70m
Front panel push button and IR remote control or serial or GUI control
EDID and HDCP function
USB 2.0 port for Pass Through
Size: 135 x 100 x 40 mm

Suitable for the service technician
For Servers, embedded PCs that are not connected to KVM
A laptop will now be screen, keyboard and mouse.
Box has input for VGA
Box has USB output for emulation of keyboard and mouse.

High End DisplayPort Extender
Resolution Up to UHD 4K, 3840 x 2160 @ 30Hz
single cable, CAT 6A up to 100 m
point-to-point connection
Plug and Play; No software drivers required
with Edid
supply voltage: 12VDC - Both TX and RX
can power the other device over the patch cable
Dim: 102 x 66 x 30 mm

Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity

16 port 4K HDMI Multi-Viewer
16 x HDMI in with 1080p
1 x HDMI out 4K @ 30Hz
HDMI 1.4, HDCP 1.4, DVI 1.0
PIP, PAP, Full Screen, Dual Mode and Quad Mode
Change via pushbutton or IR

4K HDMI Extender over the patch cable
PoC (Power Over Cable) - Power supply to be one party TX or RX
2.0b HDMI / HDCP 2.2 / 1.4
up to 120 meters
4096 x 2160 @ 60Hz (120m), 1920 x 1080 @ 60 Hz (150m)
4K @ 50 / 60Hz 4:4:4
1080p @ 120Hz
Remote-IR in both directions
TX: HDMI in, HDMI out, IR Input + out (3.5mm jack), DC in, RJ45, RS232
RX: HDMI out, audio out, IR Input + out (3.5mm jack), RJ45, RS232
Plug and Play
Power supply: 24V 1A (1 pc included)
Dimensions: 157 x 90 x 20 mm | Weight: 333g
Operating temperature: 0 - + 40 ° C
Humidity: 20 - 90% RH (no condensation)

4K HDMI / USB video transmitter PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p power. 4K (3840 x 2160) HDMI Resolution
HDMI 1.4a - approx 0.5 sec Transmitter and Receiver Slow
1 x RJ45, 1 x DB-9 female, 1 x HDMI female, 1 x VGA DB-15 female
1 x USB 2.0 Type B (PC / Server)
Can be packed up to 8 x 16 video wall
Send and Receive Choices - 16 Channels (DIP)
Supply: IEEE 802.3af / at PoE +; 12V DC 2A (not supplied)
Range up to 100m over direct Cat. 5e / 6 UTP cables
EDID emulation and & nbsp; IR transfer
As receiver, use HDMI-MULTI4K-R

Transmits DVI video and audio signals up to 120m over a single CAT6 cable
Supports resolutions up to 1920*1080@60Hz
Supports keyboard and mouse signal transmission
A cable can transmit several signals simultaneously
Transmission distance: CAT 6 120m or TCP/IP
LAN diode flash at link
Plug and play support without any settings
Including DC12V/1A power supply
Size: 164 x 85 x 25 mm
Weight: 2 x 220g
Temperature: 0 - +50°C

4K HDMI/USB video receiver PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p or 4K (3840 x 2160) HDMI resolution
HDMI 1.4a - approx. 0.1 second delay between transmitter and receiver
1 x RJ45, 1 x DB-9 female, 1 x HDMI female
4 x USB 2.0 type A (mouse/keyboard/USB touch)
Can be fitted up to 8 x 16 video wall
Transmitter/receiver selector - 16 channels (DIP)
Supply: IEEE 802.3af/at PoE+; 12V DC 3A (not included)
Range up to 100m over direct Cat. 5e/6 UTP cables
EDID emulation and IR transfer
As transmitter, use HDMI-MULTI4K-T

4 x HDMI inputs to 1 HDMI output
The four inputs can be combined into 10 variants
Seamless switching of HDMI signal
Supports Audio switching
Resolution: up to 4K @ 30Hz input
supports IR remote control
Buttons on the front to output mode selection
Bandwidth: 6.75Gbps
Operating temperature: 0 - + 40 ° C
Supply voltage: 12VDC PSU included
Consumption: 8Watt
Cable Distances, max .: 8m Input, output 10m
Dimensions: 191 x113 x 17 mm
Weight: 480g