EDID GHOST TIL HDMI
Emulates screens information
Max resolution: 1920 x 1080, 2048 x 1152
With Pass Through HDMI (F) and HDMI (F)
5V DC (via USB)
Dimensions 22 x 51 x 80 mm
At DANBIT we have a wide selection of video extenders / amplifiers with several different types. See our categories within SDI, VGA, DVI and HDMI. We offer extenders running over fiber cables, network cables or a set of transmitter and receiver boxes. If in doubt, call our sales department so we can help you find the right solution.
Subcategories
There are 72 products.
Emulates screens information
Max resolution: 1920 x 1080, 2048 x 1152
With Pass Through HDMI (F) and HDMI (F)
5V DC (via USB)
Dimensions 22 x 51 x 80 mm
KVM kabel m/2 x PS/2 hanstik og 1 x DB15HDM, 1.8 m
Multikabel fra lokalmodulet til pc med VGA og PS/2 stik
Overfør SDI-signalet op til 200 meter og op til 1200 meter med 5 i serie
HDMI BOOSTER HD 1080p
HDMI signal over single CAT 5e/6 cable
Resolution 1920 x 1080 @60Hz
POC: Power Over Cable. Transmitter powers Receiver
HDMI 1.3/HDCP 1.2
Supply voltage: 5VDC
1x Audio Extender Transmitter
1x Audio Extender Receiver
Works with analog audio only
Over Cat5e/6/7 Up To 450M
Cable wire sequence must be 568B
Power over Cable(POC)
12VDC
DVI-D extender with local and remote module up to 50 meters.
Extend DVI-D up to 50 meters via CAT. 6 RJ45 Cable
Do not connect network switch
with built-in EDID (emulate monitor)
Power supplied with 5VDC from the DVI connector on the PCE
External power supply: Buy DC5V / 2A-R-Q
Max. 1920 x 1200 pixels
1 x KVM Extender Console Unit - Remote module
1 x KVM Extender Computer Unit - Local module
1 x 12V DC Power supply included for remote module
1 x KVM cable ( VGA)
USB (2 on Console Unit, 2 on PC Unit)
Only VGA and USB Mouse / Keyboard Transfer
Does Not Transmit Touch from Monitor
USB is only for mouse and keyboard
For point RJ45 network cable up to 200 meters
with Edid Emulation
2 controls for the same PC
Video adjustment
With the included software for PC can be DVI-D shared via LAN
DVI-ETH + connect a DVI-D screen where desired and retrieves DVI signal over the network
Multiple DVI-ETH + can be connected to the same network
DVI-ETH + can also act as external graphics card via the PC USB port
HDMI Audio Extractor
Pulls audio out of HDMI stereo / 5.1CH
1 x HDMI input
1 x HDMI loop out output
1 x Audio / audio 3.5mm jack
1 x Sound / Tosilink
Analog stereo audio signal to headphone or audio amplifier
Digital audio (optical) for TOSLINK
2 CH stereo or 5.1 CH Dolby Digitlal
HDMI with EDID
Powered via the USB port
HDMI KVM transmitter / receiver over networks
set with 1 x Transmitter and 1 x Receiver
with USB - Works with Touch screen
4K UHD HDMI over IP connection
Networkswitch must be with IGMP Snooping
Up to 120m Via Single RJ45 Cat 6 - Point to Point
Up to 60km (Single Mode) via Fiber Cable - Buying SFP Module
USB2.0 - Keyboard, Mouse and Touch screen, USB Memory, etc.
a transmitter to multiple recipients, multiple transmitters for multiple recipients
The devices can be used for Video Wall (8 x 16)
HDCP 1.4 Compatible
2 x 5VDC 1A Power Supply included
4K HDMI Extender over the patch cable
PoC (Power Over Cable) - Power supply to be one party TX or RX
2.0b HDMI / HDCP 2.2 / 1.4
up to 120 meters
4096 x 2160 @ 60Hz (120m), 1920 x 1080 @ 60 Hz (150m)
4K @ 50 / 60Hz 4:4:4
1080p @ 120Hz
Remote-IR in both directions
TX: HDMI in, HDMI out, IR Input + out (3.5mm jack), DC in, RJ45, RS232
RX: HDMI out, audio out, IR Input + out (3.5mm jack), RJ45, RS232
Plug and Play
Power supply: 24V 1A (1 pc included)
Dimensions: 157 x 90 x 20 mm | Weight: 333g
Operating temperature: 0 - + 40 ° C
Humidity: 20 - 90% RH (no condensation)
High End DisplayPort Extender
Resolution Up to UHD 4K, 3840 x 2160 @ 30Hz
single cable, CAT 6A up to 100 m
point-to-point connection
Plug and Play; No software drivers required
with Edid
supply voltage: 12VDC - Both TX and RX
can power the other device over the patch cable
Dim: 102 x 66 x 30 mm
4K HDMI Extender Over IP
HDMI 1.4 / HDCP 1.4
Up to 120 meters (point-to-points)
4K @ 30 Hz
2 x USB-A 2.0 (HID emulation)
One-to-One or One-To-Many
Max 32 RX Can be connected One TX (Via Ethernet Switch)
Remote-IR from TX to RX
Plug and Play
Power Supply: 5V 1A (2 included)
Dimensions: 107 x 105 x 27 mm
Operating temperature: -15 - + 55 ° C
Weight: TX 499G, RX 494G
acquisition: K-USB4AM-AM -Fe to connect the USB-A port to PC
HDMI receiver for HDMI-MULTI-T4
Up to 70 meters with 1080p@60Hz
Input for 5VDC if cable is too long
1 x HDMI male
1 x RJ45 female for patch cable
Point to point cabling
With EDID transfer
4K HDMI Extender over Patch Cable (Cat 5e / 6)
HDMI 1.4 / HDCP 1.4
With HDMI Loop out
Audio Input and Output
Up to 120 meters (Point-to-Point)
4K @ 30Hz
Plug and Play
Power supply: 5V 1A (2 pcs. Included)
Dimensions: 60 x 56 x 19 mm
Two XLR connectors, 2ch input for analog audio
Sample rates up to 96kHz
48V PoE/ 5V USB-C
Dante audio over IP and AES67 RTP transport formats
Synchronous sample rate conversion
Excellent dynamic range, SNR and RHD performance
Supports DHCP & static IP configuration
Emuler skærmens EDID informationer
DisplayPort booster up to 70 meters
Via RJ45 CAT5e / 6
4K @ 30Hz / 4: 4: 4 at 40 meters
1080p @ 60Hz 16bits at 70 meters
Audio: up to 7.1 LPCM 192KHz / Dolby TrueHD / DTS-HD MA
1 x DisplayPort
1 x RJ45
1 x DC 5V 2A to each unit
Operating temperature: -10 to 45 ℃
Dimensions: 92 x 69 x 25 (mm)
Weight: 160g (Sender)
Weight: 180g (receiver)
VGA Extender over TCP / IP or Point to Point.
Up to 200 meters over CAT 5e / 6 patch cable.
1920 x 1080 @ 60Hz
3.5mm Audio
USB for keyboard and mouse only!
Audio frequency: 32kHz, 44.1kHz, 48kHz
Sound format: DTS-HD / Dolby true HD / LPCM7.1 / DTS / DSD
Operating temperature: -5 ~ 70 ° C
Dimensions: 104 x 92 5 x 24 mm