PoE PSU / PoE Injector / PoE splitter

PoE - Power over Ethernet

PoE supply voltage for clients via network cables as separate power supplies for example. surveillance cameras and serielportservere is unnecessary. PoE equipment is designed to receive the supply voltage via network cables. Often PoE also be supplied from an independent power supply. Cable lengths can restrict the use of PoE. A new standard called PoE Plus (IEEE 802.3at) can deliver more power than the...

PoE - Power over Ethernet

PoE supply voltage for clients via network cables as separate power supplies for example. surveillance cameras and serielportservere is unnecessary. PoE equipment is designed to receive the supply voltage via network cables. Often PoE also be supplied from an independent power supply. Cable lengths can restrict the use of PoE. A new standard called PoE Plus (IEEE 802.3at) can deliver more power than the current PoE standard (IEEE 802.3af). Further information about PoE is available at https://www.danbit.dk/da/content/41-hvad-er-poe-

General info about midspan and endspan

PoE standard IEEE 802.3af allows the use of two types of power supply units: endspan and midspan. < p> A endspan unit (PoE switch) typically supplies power via the data leading wires of the network cables (pins 3 and 6, 1 and 2) and is available for 10 / 100Mbit and 10/100 / Ethernet 1000Mbit sources. A endspan unit is a combined midspan injector and switch. It is installed in place of an ordinary switch, if the connected network devices to be powered over the network

A midspan injector (hub) installed between a non PoE switch and the power consuming device. It is restricted to supply power through the unused pin pair (4, 5, 7 and 8) in a 10 / 100Mbit network.

POE standard

PoE power supply and Splitter - Danbit A / S

PoE PSU / PoE Injector / PoE splitter

There are 45 products.

Showing 1-20 of 45 item(s)

Active filters

  • PoE++ Splitter with...

    PoE++ Splitter with 12VDC/5.8A or 24VDC/2.2A output voltage. 802.3at/bt. Gigabit.

    PoE++ splitter - separate DC and Data
    Data without PoE to equipment
    DC voltage output to non-PoE device
    Max. 70 Watt
    Data is 10/100/1000Mbit/s
    PoE 802.3at/bt
    End-span + Mid-span
    End-span or Mid-span
    2  x RJ45 interfaces
    1 x RJ45 port Data + Power input
    1 x RJ45 port Data output
    2 x DC output (4-pin terminal block)
    DC output 12VDC or 24VDC w/DIP switch
    Size: 135 x 88 x 32 mm
    DIN-mount
    Weight: 445g

    Price 1,545.00 DKK
    Product code: ETH-POE++12-24-D
    On the way in  
  • PoE++ extender / Extender...

    PoE++ extender / Extender over CAT. 5/6/7/8, Up to 200 meters, 4 PoE+ outputs

    10/100/1000Mbit network extender / PoE splitter
    1 x PoE input (PD) PoE++ 95W
    4 x PoE outputs (PSE) PoE+ 32W
    Up to 32W per PoE port, 65W total power budget (see specifications)
    Extend the network cable over the maximum 100 meters for PoE solutions
    Extenders are powered by PoE and pass PoE on to the next extender
    Dimensions: 168 x 93 x 32 mm, Weight: 403g

    Price 1,150.00 DKK
    Product code: ETH-POE-BOOST-4G
    On the way in  
  • PoE+ extender. Go beyond...

    PoE+ extender. Go beyond the 100 meter limit. Sends PoE & Data Through

    10/100 / 1000Mbit PoE Network Extender
    Extend the network cable with PoE over the magic 100 meters
    4 pieces. Extenders provide a maximum distance of 500 meters
    Extenders are powered from PoE and pass PoE on to the next Extender
    Dimensions: 94 x 70 x 26 mm

    PoE In: Max 30.8 Watts

    PoE Out: Max 26 Watts
    Weight: 189g

    Price 800.00 DKK
    Product code: ETH-POE-BOOST-1G+
    Physically in stock  
  • PoE Tester for units over...

    PoE Tester for units over PoE network

    Quick and Easy PoE tester
    IEEE 802.3af / at
    UTP Cat 5 or above
    100 meters max.
    Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
    weight: 20g

    Price 204.00 DKK
    Product code: POE-TESTER
    On the way in  
  • PoE Splitter RJ45, 5V/3A,...

    PoE Splitter RJ45, 5V/3A, 9V/2.5A, 12V/2.5A, 18V/1.6A, 10/100/1000Mbit,

    PoE splitter with voltage selector for 5, 9.12.18 Volts
    Up to max. 30W
    IEEE 602.3af/at(POE) IEEE 802.3 (Ethernet)
    IEEE 802.3U, IEEE 802.3ab (Gigabit Ethernet)
    1 x 10/100/1000 Mbit RJ45 PoE port (data + power input)
    1 x 10/100/1000 Mbit RJ45 LAN port (data only)
    1 x DC plug 5.5 / 2.1 mm - Output voltage (DC out)
    Cat. 5E, 6 UTP
    DC voltage from PoE switch or Injector 36 to 57 VDC
    2 x RJ45 Note PoE does not go back to the RJ45 output - only data!
    ROHS, CE, FCC (FCC Part15, Class B)

    Price 330.00 DKK
    Product code: ETH-POE5-18V
    Physically in stock  
  • PoE Injector for Gigabit...

    PoE Injector for Gigabit network, 48-56VDC, 95W

    PoE injector
    2 x 10/100 / 1000Mbit RJ45 (PoE)
    UTP / TCP Cat.5e or over
    Rugged Aluminum, IP30 protection
    Maximum POE 95watts at 56VDC input
    Dust temperature: -40 ° C ~ 75 ° C
    humidity: 5% to 95% (Non-condensing)
    Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
    Metal housing with IP30 density
    DIN rail and Wall Mount

    Price 1,733.00 DKK
    Product code: ETH-POE48-95W
    On the way in  
  • PoE Injector for Gigabit...

    PoE Injector for Gigabit network, 48-56VDC, 95W

    PoE injector
    2 x 10/100 / 1000Mbit RJ45 (PoE)
    UTP / TCP Cat.5e or over
    Rugged Aluminum, IP30 protection
    Maximum POE 95watts at 56VDC input
    Operating Temperature: -40 ° C ~ 75 ° C
    Humidity: 5% to 95% (Non-condensing)
    Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
    Compliant with 95W Power over HDBaseT (PoH) Standard
    Metal housing with IP30 density
    DIN rail and wall bracket

    Price 1,476.00 DKK
    Product code: ETH-POE48-95WBH
    On the way in  
  • PoE Gigabit 95Watt Injector...

    PoE Gigabit 95Watt Injector PoE++, Output voltage 54VDC, Supply 12 - 54VDC, 6A. DIN

    PoE++ power supply via Ethernet cable, up to 95 Watt
    LAN without PoE in, gives LAN with PoE out
    PoE++ 54VDC/95W
    Mid-span and End-span give 95 Watts
    For 100/1000/2500/5000Mbit networks.
    PoE power output DC 24V~54V input: Max. 89.5W@1m cable, Max. 75W@100m cable
    PoE power output DC 12V input: Max. 60W@1m cable, Max. 52W@100m cable
    Temperature range: -40 - +75°C
    Dimensions: 135 x 88 x 32 mm
    DIN installation
    Powersupply input from 12 - 54VDC

    Price 1,920.00 DKK
    Product code: ETH-POE54-95W
    On the way in  
  • Poe Extender. 1 x PoE++ in...

    Poe Extender. 1 x PoE++ in and 2 x PoE+ out. Split PoE out to 2 PoE PD units, 30 watts each. IP67 and IK10 Vandal Proof

    Gigabit PoE and data Extender PoE splitter
    1 x RJ45 Data + PoE ++ input
    2 x RJ45 Data + PoE + outputs
    Standard: IEEE 802.3bt and 802.3at
    from injector to Extender up to 100 meters
    from Extender to PD Devices Up to 100 meters
    IP67 Aluminum Molded cabinet
    Temperature range: -40 - + 75 ° C
    Plug Play
    Wall fittings
    Size: 170 X 44 x 73 mm with cable gland

    Price 1,863.00 DKK
    Product code: ETH-POE-BOOST-2G-U
    On the way in