16 ports Moxa NPort 5650-16, serielportserver
16 ports RS232/422/485 Serial Device Server
10/100Mbit
MOXA NPort 5650-16
19" Rack mount
Seriel Port Server
Equipment with a serial port is usually connected directly to the computer when the distance is less than 15 meters.
With a serial port server (Serial Device Server), the equipment can be connected anywhere on a network so that all network users can use them. This applies to both local and internet. When connected over the Internet, the reach becomes global.
It has the task of making a...
Equipment with a serial port is usually connected directly to the computer when the distance is less than 15 meters.
With a serial port server (Serial Device Server), the equipment can be connected anywhere on a network so that all network users can use them. This applies to both local and internet. When connected over the Internet, the reach becomes global.
It has the task of making a serial port available on a network. It is a compact computer that has an Ethernet network interface and one or more serial ports. Its firmware is only for sending data from the network to the proper serial port and transmitting data received on serial ports to the network. The protocol is TCP / IP (Internet Protocol), so even a serial port server with many ports has only one IP address and each serial port has its own port number.
Three communication methods
In principle, it can be communicated with serial port servers in 3 different ways:
Used if there is no computer with network function available. The two serial port servers are configured to send data to the counterpart. They are defined as "Master" and "Slave", each with its own IP address and the counterparty's IP address. In principle, it is a fixed connection between the serial ports and it is important that the connection be independent of operating systems and software versions otherwise used on the network.
The "Box to box" method is also the only usable solution in cases where the system cannot include software that uses "sockets" or COM port drivers, for example. a PLC and a simple measuring port with serial port.
In all common programming languages for Windows (Visual C ++, Visual basic, Delphi and others), TCP / IP is accessed via "Winsock", releasing the programmer to kno
This method assumes that the applications using the serial port server have access to the network via the TCP / IP protocol using the networking features built into Windows. It is the standardized interface for these features called "Winsock".
In all common programming languages for Windows (Visual C ++, Visual basic, Delphi and others), TCP / IP is accessed via "Winsock", releasing the programmer to know all the details of the underlying network protocols.
Once the protocol, IP address, port number and client / server status are selected, free-form data blocks can be exchanged between the program and the serial port server.
There are a variety of variants among serial port servers. The number of serial ports per. unit varies from 1 to 16, and the serial ports can be traditional RS232 ports with "point to point" connection up to approx. 15 m or RS422 ports with balanced "point to point" signals up to approx. 1200 m and RS485 ports, for "multidrop" connection, where up to 32 serial ports can share the same 2- or 4-wire bus. Here, the range will also be up to 1200 m.
Most serial port servers use the wired Ethernet network interface, others use wireless networks (Wifi) or fiber optic cable, where the network connection is via fiber optic cable.
Subcategories
There are 47 products.
16 ports RS232/422/485 Serial Device Server
10/100Mbit
MOXA NPort 5650-16
19" Rack mount
Seriel Port Server
External COM ports via Ethernet and Internet
8 x RS232
RJ45
10/100Mbit Baset Device Server
15kv ESD
for RackMontage
100-240 VAC Power Input
OS Support: 95/98 / Me / NT / 2000/2003
Real Com / Tty Drivers, Linux Real Tty Driver
Operating temperature: 0-55 ° C
16 Ports RS232 Serial Port Server
Universal Serial Device Server
MOXA NPort 5610-16
19 "Rack Mount
Monitor, manage and manage industrial devices
1 x RJ45 Ethernet port
2 x SFP slot for fiber transceiver (SM or MM)
Industrial EMC protection, temperature operation wide, -40 ° C ~ 85 ° C
Fast-Ethernet 2 x 100/1000 SFP Slots with RSTP Redundancy
4 software Selected RS485 / RS422 Serial ports, up to 921Kbps
TCP Server / Client, UDP, Virtual com and tunneling modes supported
Embedded Security with PPTP, IPSec or OpenVPN Client / Server
Redundant 12 ~ 48 VDC Power Entries
Configuration via Web Browser / Serial Console / Telnet / Windows Utility
Robust Metal Cabinet with wall or DIN rail
1 port LTE serial to Ethernet gateway / modem, RS232 / 422/485
GSM / GPRS / EDGE / UMTS / HSPA / LTE
Supports VPN and virtual comport
Operating temperature -30 -70 ° C
IP30
Supplied via the 12-48 VDC
DIN rail mounting (bracket supplied)
Monitor, manage and manage industrial devices
2 x SFP slot for fiber transceiver (SM or MM)
Industrial EMC protection, temperature operation wide, -40 ° C ~ 85 ° C
fast- Ethernet 2 x 100/1000 SFP slots with RSTP Redundans
4 software Select RS232 / RS485 / RS422 serial ports, up to 921Kbps
TCP Server / Client, UDP, Virtual com and tunneling modes are supported
Embedded security with PPTP, IPSec or OpenVPN Client / Server
Redundant 12 ~ 48 VDC Power entries
Configuration via Web Browser / Serial Console / Telnet / Windows Utility
Robust metal cabinet with wall or DIN rail mounting
1 Ports LTE Serial for Ethernet Gateway / Modem, RS232 / 422/485
GSM / GPRS / EDGE / UMTS / HSPA / LTE
Supports VPN and virtual computing
operating temperature 0- 55 ° C
IP30
12-48 VDC
DIN mounting (fittings included)
8 pcs. External COM ports via Ethernet and Internet
Virtual-Com Port, Pair-Mode - Back to Back
Socket Modes: TCP Server / TCP Client / UDP
easy to configure
cables Not included (RJ45 for DB9)
Supports Win10 and earlier us, Linux
4 COM ports over Ethernet, Internet
Each COM port can be RS232 or RS422 or RS485
RS232 Pin 1 - 8: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
RS422 / RS485 4-W: Pin 1 - 5: TXD +, TXD, RXD +, RXD, GND
RS485 2-W: Pin 3 - 5: Data, Data +, GND
Baud Rate: 50 bps - 921Kbps
Data Bits: 5, 6, 7, 8
Parity: 1, 1.5, 2
Stop Bit: Odd, Even, None, Space, Mark
2 x RJ45 10 / 100Mbit
Alarm: Relay output
Supply voltage: 12 - 48VDC 6.5WATT
Web Management
IP Version: IPv4 / IPv6. TCP Server, TCP Client, UDP Client
Virtual Com
Pair Connection
Supporter: XP to Win10, Server 2003, 2008, 2012
Size: 135 x 88 x 50 mm
DIN bracket
4 COM ports via optical fiber cable
point to point or pount to 4 points
4 x RS232 ports up to 2km with multi mode cable
4 x RS232 ports up to 20km with single mode cable
Buy 100Mbit SFP Module (Multi Mode or Single Mode)
1 x 100 Mbit SFP for LC Duplex Fiber cable
4 x RS232 DB9 male connector
Setup via built-in Web server
62 x 50 x 120 mm
DIN fittings
Display 3 LEDs Displays TX / RX, Network and System Status
Supply voltage: 9 - 32VDC Redundant (not supplied)
External COM ports via Ethernet and Internet
Serial Device Server with RS422 or RS485 via Ethernet and Internet.
RS422 / 485 seriesport via screw terminal
Dual DC Power input with Power Jack and Terminal block
Power supplies from 12 - 48VDC
DIN mounting
External COM ports via Ethernet and Internet
Serial device server to RS232/422/485 with WIFI
Intelligent Can For Modbus TCP / IP Converter
Supports both CAN specification 2.0A and 2.0B
Maximum transmission speed up to 1M BPS for CAN and 115.2 Kbps for RS-232 RS-485
Maximum transmission distance on CAN over 1000m (Follow the CAN specification)
7-segment LED display for module IP, RS-232 Baud rate, CAN configuration ...
Supports Web Configuration
Supports Maximum 24 Ethernet clients Connection
Modbus TCP / RTU command for reading and writing CAN message
Transparent communication between the CAN devices via Ethernet
30 Specific CAN IDs in Modbus TCP / RTU Mode
DIN mounting
Internet Communication controller with 1 x CAN bus, 1 x RS-232, 1 x RS-485 and 1 x Ethernet
10/100 Base-TX Ethernet controller
TCP / IP protocol
80 MHz CPU
1 x RS-232 port, 1 x RS-485 port and 1X CAN port can be used simultaneously
Max Transmission Speed up to 1M BPS for CAN and 115.2Kbps for RS-232 RS-485
7 -Segment LED Display
Software Configuration for Can and RS-232
Web Configuration
Up to 25 Ethernet Client Connections
Supports Virtual Com
2 COM ports over Ethernet, Internet
Each COM port can be RS232 or RS422 or RS485
RS232 Pin 1 - 8: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
RS422 / RS485 4-W: Pin 1 - 5: TXD +, TXD, RXD +, RXD, GND
RS485 2-W: Pin 3 - 5: Data, Data +, GND
Baud Rate: 50 bps - 921Kbps
Data Bits: 5, 6, 7, 8
Parity: 1, 1.5, 2
Stop Bit: Odd, Even, None, Space, Mark
2 x RJ45 10 / 100mbit
Alarm: Relay output
Supply voltage: 12 - 48VDC 6.5WATT
Web Management
IP Version: IPv4 / IPv6. TCP Server, TCP Client, UDP Client
Virtual Com
Pair Connection
Supporter: XP to Win10, Server 2003, 2008, 2012
Size: 135 x 88 x 32 mm
DIN bracket
External COM ports via Ethernet and Internet
Easy IP Address Configuration with LCD Panel
10 / 100Mbit Auto-Sensing Ethernet
4 Serial Ports, With Support for RS422, and RS485 < Br> Built-in 15 kv ESD Surge Protection for All Serial Signals
Versatile Socket Operation Modes, Including TCP Server, TCP Client, and UDP
Choice of Configuration Methods: Web Console, Telnet Console, and Windows Utility
SNMP MIB-II for Network Management
-40 to 75 ° C Operating Temperature
External COM ports via Ethernet and Internet
2 ports secure terminal server, MOXA NPort 6250
1 X RJ45 and 2 X RS232 / 422/485 (DB9) connectors
10 / 100 Mbps, auto MDI / MDIX
Operation Temp. 0 - 55 °
Supplied via 12-48 VDC
Seriel port: 2 x RS232, 1 x RS232/485 maks. 115 Kbps
Signaler: RS232: Rx , Tx , RTS , CTS
RS485: Data +, Data - (2-leder halv duplex)
Digital I/O: 6 indgange og 2 udgange TTL
Protokoller: TCP, PPP
Stik til digital I/O: Skrueterminaler
3/5V SIM kortholder indbygget
3 lysdioder viser GPRS- og systemstatus
Strømforsyning: 9 - 35 VDC maks. 4,8 Watt. medfølger ikke
Leveres med beslag til DIN skinne
Modbus over the Ethernet or Internet
MODBUS server with 1 x RS232 and 1 x 422/485
Can run Device to Device
0/100 Mbps Ethernet port, auto MDI / MDIX, 10/100 auto, 1500V magnetic insulation only on
RS485 RS232 Modbus ASCII / RTU port, 1 RS422 / 485 Modbus ASCII / RTU port, 16V / 400W TVS isolated, RS485 automatic line control
9 ~ 30VDC power input, IP30 enclosure , DIN rail mounting structure, USB port (Modbus serial port expansion and capture of memory)
Serielportserver 2 x RS232 / 422 /485 MOXA Nport 5210
Compact design for easy installation
Socket modes: TCP server/TCP client/UDP
Easy-to-use Windows utility for configuring multiple device servers
Supports 10/100M Ethernet
Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485
SNMP MIB-II for network management