1 x temperature measurement with PT100 and nine RTD temperature sensor, 16bit, RS485 bus
RS485 Module for temperature sensors
1 x input for 2-, 3- or 4-wire PT100,Pt1000 sensor
Nickel Temperature sensor
Supply voltage: 10 - 30vdc
Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
Dual Watchdog
Operating temperature range: -25 to +75°C
I/O pair connection mirrors input to second output
2 x AI to load cell
1 x load cell excitation voltage out
2 x Digital out with counter
2 x Digital out (Open Collector)
Supply voltage: 10 - 30VDC / 3watt
ETHIO3IAO-P-I is a strain gauge sensor module with two analog input channels, one excitation-voltage output, digital input channel 2 and channel 2 digital output module. It provides various programmable analog input inputs (+/- 1 mV, 50 mV +/-, +/- 100 mV, 500 mV +/-, +/- 1 V and +/- 2.5 V) and supports the full bridge, half-bridge and kvartbro. The area of each analog input can be individually configured. Excitationsspændingsoutput may be in the range of 0 ~ 10 V with a 60 mA driving efficiency. Digital outputs can also be set as the alarm outputs. ETHIO3IAO-I-P may also provide measurement of the long distance line gauge which compensates for the voltage drop due to the measurements over a long distance.
RS485 Module for temperature sensors
1 x input for 2-, 3- or 4-wire PT100,Pt1000 sensor
Nickel Temperature sensor
Supply voltage: 10 - 30vdc
ANALOGT INPUT MODUL TIL MODBUS
4 single ended input +/- 10V analog, +/- 5V, +/- 2.5V ... +/- 20mV
128kS / s for each channel sampling rate
FIFO: 4000 samples - memory 30 million data samples
24bit resolution
2 x analog output +/- 10V, +/- 5V, 0-5 / 10V
analog output 12bit resolution
Trigger mode: SW, Ext analog
1 x 32bit counter, max. 30kHz
1 x Encoder input: Qadrant / CW / CCW and pulse
3 x digital inputs (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm | Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C
8 channel analog input module for RS485 Bus
16bit resolution
10 measurements per second (total)
for current measurement - shunt with 125 ohm resistance
Supply voltage: 10 - 30vdc / 1.3 watt
Dim: 123 x 72 x 35 mm
with your bracket