12VDC 3 Amp (36Watt) from the AC adapter 110 - 240VAC, Jack: 5.5 / 2.1mm
Switch mode type
110-240 VAC for & nbsp; 12VDC / 3A
DC connector: 5.5 / 2.1 mm
GSM-alarm - ONLT FOR 2G
Setup via USB with Windows setup program, SMS and HTTP API
2 digital "dry contact" inputs
2 analog inputs, 0 - 10VDC - with resistance can be changed to input
2 mA analog inputs, 0 -10VDC or 0-20mA, 10bit (WEB control)
4 relay outputs, NO and NC
1-wire input for up to 8 Teracom sensors
RS485 interface for max. 8 MODBUS RTU sensors
data logger with memory for 70,000 logs
Upload data to HTTP Server
SMS alert to max. 5 recipients
Email alert for max. 5 receivers (SMTP with TLS support)
relay outputs with calls
12 to 24VDC, 350mA @ 12VDC - acquisitions PSU
TCG140 is a GSM-GPRS remote I / O module for distributed monitoring and control over the mobile network. The module can be used as an independent device or as part of data monitoring systems (SCADA).
The GSM / GPRS remote's I / O module has two digital "dry contact" inputs, two analog inputs with 0-10VDC and two analog inputs with 0-10V or 0-20mA. The analog input mode can be done via the GUI.
The device supports 1-Wire and RS485 (MODBUS RTU) interfaces. Both interfaces can have up to 8 sensors divided between the two interfaces in a random relationship.
The device records all monitored parameters in internal FLASH memory. The records are made at the previous set time interval and / or in an alarm mode. The log file can be periodically uploaded to a dedicated server using HTTP Mail.
The device has four relays with NO and NC contacts. The relays can be enabled externally (SMS, Cold or HTTP API command) or locally. For local activation, one of the monitored parameters is assigned to the relay - the alarm state of the parameter activates the relay.
The TCG140 can start a connection (HTTP Post) for remote dedicated servers. The payment load for this is an XML file, with current values for monitored parameters. The HTTP content can be sent periodically or under alarm conditions. In response to the HTTP content, an HTTP API command can be returned for relay activation or modification of some settings.
In addition to the HTTP Post alert, the device can send SMS and / or email as an additional warning to a maximum of 5 SMS and email recipients.
Switch mode type
110-240 VAC for & nbsp; 12VDC / 3A
DC connector: 5.5 / 2.1 mm
Data logger for external temperature and humidity sensors
Sensors are not included - must be purchased separately, see selection
Memory for 70,000 measurements
Temperature, humidity and dew point can be displayed graphically
1-Wire and RS485 sensor interface
Up to 8 Teracom sensors can be connected
MODBUS TCP/IP support
SNMP v2 with trap alarm for 5 email recipients
Secure email
XML/JSON and HTTP API commands for client-server
Dynamic DNS, DynDNS, No-IP and DNS-O-Matic
NTP support for time synchronization
Remote firmware update
Supply voltage: 10 - 32VDC - purchase PSU
DAQ software til TERACOM Ethernet baserede måleenheder
Brugervenlig WEB interface for nem konfigurering og kontrol
Fleksible bruger adgang og management
Distribueret monitorering af måleenheder i “client” mode
Alarm advisering
Aktivitets log
Grafisk og data visning med stor visualisering
Nem adgang til rå-data, tabeller, eksport in .csv format (kommasepareret)
Database management
Sende kommando til kontrollere in “server” og “client” mode
Kommando status log
Smoke alarm with a diameter of 15 meters
installation up to 11 meters high
With potential-free relay contact
Smoke sensitivity: EN 54-7:2000+ A1:2002
Operating temperature: -10 to +55 °C
Dimensions: Ø100 mm, h 47 mm
Weight: 100 g
1-wire Temperature / Humidity sensor
Temperature -20 - +60°C
Humidity 10 - 90% RH
Temp tolerance +/-0.4°C at -10 - +60°C
Moisture tolerance ±3.0%rH at 20 - 80%rH
Long term operation ±0.25%/year at 20 to 80%rH
Long-term operation ±0.05°C/year at -10 to +60°C
Solution 0.1 %rH 0.1 °C
Power supply/consumption 4.0 to 5.5 VDC 5 mA
Dimensions 62 x 28 x 16 mm
Cable length 1 m