Protection for RJ45 network - transmits PoE
Transient protection for 10 / 100Mbit Network. 4kV to ground.
Transfer PoE voltage.
2 x RJ45 female.
Ground wire is to be connected.
Transient protection for 10/100/1000 Mbit networks
10kV to ground.
2 x RJ45 female.
Ground wire should be connected.
Ideal for protecting network equipment such as serial port servers. Easy installation - inserted between two network cables and connected to ground via the loose wire.
Transient protection for 10 / 100Mbit Network. 4kV to ground.
Transfer PoE voltage.
2 x RJ45 female.
Ground wire is to be connected.
RJ45 two RJ45 Thunder Protector (IP only)
Thunder Protector protect two lightning over-voltage
Surge Over-voltage and electrostatic discharge.
Maximum discharge current 10KA
Aluminum Case with two RJ45 Port
Isolator for 1000 Mbit network, one port
Insulation on all 4 pairs.
Transient protector - Remember the earth connection (screw)
2 x RJ45 female
Max. Discharge current (fine LL): 40A (8/20 microSec)
Max. Discharge current (coarse LE): 2.5 kA (8/20 microSec)
Residual voltage: <5V (1.2/50 microSec)
Hi-Pot (Pri to Sec) isolation: 1500Vrms, 1mA, 60 seconds
Cannot transmit PoE
Dimensions: 72 x 50 x 25 mm
Surge Protection for 10/100 / 1000Mbit network
Review voltage: 5V / 300mA
review loss: Less than 0.2dB
2 x RJ45 female (in / out)
Protected Pin: 1 - 8 (data)
Threshold at 15V
Max Transient current: 5 - 15k Amp
Operating temperature: -40 - +70°C
Moisture: less than 90% RH
Size: 112 x 38 x 30 mm
Weight: 150g
Earth cable of more than 2.5kvmm must be shorter than 1 meter
Earth resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike