PoE ULTRA injector, 60 watts over the 4 x twisted pair RJ45, 100-240VAC
PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage
POE power supply via Ethernet cable, up to 30 watt
LAN without PoE in, gives LAN with PoE out
Poe +, 56VDC / 30W
10/100/1000Mbit network.
Power supplies from 12 -48VDC / 32W Max
Redundant Power Input via Terminal Block
Power supply not included
Dim: 135 x 87 x 32 mm
Operating temperature: -40 ~ +75°C
Injector ETH-POE56-DC12-48 can supply 30-watt 56V DC via CAT.5 / 5e / 6 Ethernet cables that allow data and power to transmit simultaneously through the cable between Injector and PoE PD (power supplied) or Poe splitter. The maximum distance between the injector and the splitter is 100 meters. With Industrial IEEE 802.3at Power Over Ethernet Plus devices installed, the system administrator only needs a single RJ45 Ethernet cable to drive both power and data to each device. It would make the network implementation easier and more reliable.
Practical and reliable power supply. To facilitate 802.3at POE usage with commonly used 12 ~ 48V DC power input for transport and applications on industrial level ETH-POE56-DC12-48 Power Boost technology to solve the power source problem, but does not require special power supplies. Its extensive voltage design is suitable for usefulness throughout the world with high availability applications requiring double or backup power inputs.
PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage
PoE injector
2 x 10/100 / 1000Mbit RJ45 (PoE)
UTP / TCP Cat.5e or over
Rugged Aluminum, IP30 protection
Maximum POE 95watts at 56VDC input
Operating Temperature: -40 ° C ~ 75 ° C
Humidity: 5% to 95% (Non-condensing)
Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
Compliant with 95W Power over HDBaseT (PoH) Standard
Metal housing with IP30 density
DIN rail and wall bracket
Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g
Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 12VDC 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g