2G GSM controlled socket - Turn equipment on and off with SMS messages
REMAINING STOCK
2G GSM
Turn on/off via SMS messages
connected to a power outlet for GSM 2G network
Setup with phone number
Connects to 230vac
Max 10 amps
with Schuko plug
SIM card not included
995.00 kr
Excl. VAT
Quantity
Physically in stock
Product number TELEBOOT-GSM
Turn equipment on/off via SMS messages. Remotely control, for example, a server that has crashed or turn on the heating in the summer house.
Telephone relay that plugs into a socket and connects to the GSM (2G) network.
The relay is controlled via SMS messages and calls.
Set up with the telephone numbers that must have access to turn the relay output on/off.
Connects to 230 VAC. maximum 10 Amp in DK can be drawn through the unit
Built-in relay can handle 230VAC/16Amp, not inductive load.
Has a schuko plug.
requires a SIM card - not included.
Other products in same category:
4G LTE alarm and remote control, M2M, Datalogger, I/O with Digital and Analog, 1-wire, Relay, MODBUS, 10 - 28VDC
Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital “dry contacts”. High on contact
4 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 loggings
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm for 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - optional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
2,750.00 kr
Item Number: TCG140-4E
Programmable Industrial Controller with 8 Digital inputs and 4 Relay outputs
ARM Cortex - A53 CPU , 1.2 GHz
RAM 1Gb SDRAM
16GB of memory
2 x RS232/422/485
8 x DI and 4 x relay outputs
DC input 9-32V
4G module
OS : Linux Raspbian
User need knowledge of linux and programing
Documentation for DI/O and 4G module
5,450.00 kr
Item Number: RPI-4G-8I4O
Board til fjernkontrol og måling via Internet/LAN, 1 x DI, 1 x AI, 1 x Relæ, 1-Wire temperaturføler
Open board til smart temperatur- eller fugt måling and styring
Password beskyttet Web baseret konfiguration og kontrol
1 x digital input med “dry contact” og “logic level” mode
1 x analog input fra 0 til 60VDC
1 relæ output med NO/NC kontakter
1-Wire input til 1 temperature eller fugtmåler
SNMP v.1 support
SNMP traps ved alarm
E-mail udsendelse ved alarm
SMTP med godkendelse (SSL/TLS er ikke supporteret)
HTTP og XML API kommandoer
Remote FTP firmware update.
805.00 kr
Item Number: TCW112-CM
4G LTE alarm and remote control, 2 x Digital input, 2 x Analog, 2 x Relay output, 1-wire to sensor, MQTT, 8 - 28VDC
GSM/LTE alarm - 4G
Configuration via USB (Windows program) or SMS
2 x digital inputs with "dry contact" or "logic level" mode
2 x analog inputs from 0 to 60VDC, 10 bits
2 x relay outputs with NO/NC contacts
1-Wire interface for 4 Teracom temperature and humidity sensors
Input can be navigated with alarm text etc.
SMS alarm - up to 5 numbers
Email alert - up to 5 email recipients, SMTP with TLS support
1 relay can be activated with calls from up to 100 phone numbers
Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.
MQTT 3.1.1 support
Firmware update "over the air"
Supply voltage: 8 - 28VDC, 2Watt - optional PSU
Dimensions: 109 x 65 x 32 mm
Weight: 152g
2,212.00 kr
Item Number: TCG120-4E
Mini Vertical level switch - water level switch for GSM Alarms
Mini vertical level switch / swim switch
Assembly: Vertical
contact output: Direct load
Cable length: 30 cm
Operating temperature: -20 ° C to + 80 ° C
AC voltage Max: 130V < Br> DC voltage Max: 180V
Max current: 700mA
210.00 kr
Item Number: LEVELSENSOR
GSM alarm with SMS. Battery backup. 2 x Digital inputs, 2 x Relay outputs. 3G/4G. 9 - 36VDC
GSM/3G/4G LTE
2 x digital input, compatible dry contact and wet contact, supports EOL connection;
2 x relay outputs (240VAC@3A)
One relay output can be turned on/off by sending an SMS text
The second relay output can be turned on for 4 minutes if inputs are activated
Supports input status recovery, external power failure alarm via SMS texts
Must be programmed with USB cable to PC
9~36VDC supply voltage and power source output for external device
Power supply (adapter) included
Up to 3 users can receive alarm and daily report SMS
Up to 5 users can receive alarm calls - call + SMS
Free SMS APP
Rechargeable backup battery and power monitoring alarm
Metal enclosure, IP30
Operating temperature: -10 - +70°C
Dimensions: 70 x 88 x 30 mm
Wall installation and DIN
Whip antenna with magnetic base, 3m cable included
1,422.00 kr
Item Number: GSM-ALARM130-K
Power controls with on and off via network, 8 x IEC C13 outputs, up to 10A, RJ45, inputs for 2 temp / moisture sensors
8 Port Networked PDU with Individual On / Off
19 "Rack Mount, 1U
User Interface via Web Browser with Password
Scheduled on / off per port
Programmable Sequential Power Up
8 x IEC C13 outputs, max. 10A - front mounted plug
2 x RJ45 Inputs for temperature and temperature / humidity sensor with alarm
1x Seriel Connection for control
8 x Watchdog with ping of each connected PC
SNMP Get / traps and e- mail support
Supports Iphone and Android
4,974.00 kr
Item Number: NPOWER8-8211
8 Channel PDU with 8 x IEC C13 Lockable outputs. 1 x IEC C20 16A input. ON / OFF, MONITORING, EXT. SENSOR INPUT, RJ45
Intelligent 8 ports Power Distribution Unit
Justerbar sekventiel tænd / sluk
Samlet strømovervågning
Samlet spændingsindgang
Outputovervågning
Total brugt kWh
Effektfaktorgenkendelse
Driftstemperatur: Op til +55°C
8 x låsbar IEC-C13 netudtag
120 - 240VAC
Styr op til 3 PDU slaver fra en master
1 x C20 16Amp
Sensor for temperatur- og fugtighedsalarm
Alarm for vand via infrarød sensor
Røgdetektor
Automatiske alarmmeddelelser
11,880.00 kr
Item Number: NPOWER8IEC-SM
Previous
Next








