1 Port serial port server, RS422 / 485, PoE. Serial Device Server
External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting
External COM ports via Ethernet and Internet
Easy IP Address Configuration with LCD Panel
10 / 100Mbit Auto-Sensing Ethernet
4 Serial Ports, With Support for RS422, and RS485 < Br> Built-in 15 kv ESD Surge Protection for All Serial Signals
Versatile Socket Operation Modes, Including TCP Server, TCP Client, and UDP
Choice of Configuration Methods: Web Console, Telnet Console, and Windows Utility
SNMP MIB-II for Network Management
-40 to 75 ° C Operating Temperature
• Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
• Serial Interface
Number of Ports: 4
Serial Standards: RS-422/485 (software selectable)
Connector: Terminal block
Serial Line Protection: 15 KV ESD protection for all signals
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Terminator for RS-485: 120 Ω
• Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
• Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
• Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers Linux kernel 2.4.x, 2.6.x
• Mini Screen with Push Buttons (standard temp. models only)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
• Physical Characteristics
Housing Metal, IP30 protection
Weight 740 g
Dimensions Without mounting kit: 158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in)
With mounting kit: 176 x 103 x 33 mm (6.93 x 4.06 x 1.30 in)
• Environmental Limits
Operating Temperature Standard Models: 0 to 55°C
Wide Temp. Models: -40 to 75°C
Storage Temperature -40 to 75°C
Ambient Relative Humidity 5 to 95%
• Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption: 320 mA @ 12 V, 175 mA @ 24 V
External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting
Serial device server with RS232 / RS485
RS232 via DB9
RS485 via screw terminal - 2-wire
4 COM ports over Ethernet, Internet
Each COM port can be RS232 or RS422 or RS485
RS232 Pin 1 - 8: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
RS422 / RS485 4-W: Pin 1 - 5: TXD +, TXD, RXD +, RXD, GND
RS485 2-W: Pin 3 - 5: Data, Data +, GND
Baud Rate: 50 bps - 921Kbps
Data Bits: 5, 6, 7, 8
Parity: 1, 1.5, 2
Stop Bit: Odd, Even, None, Space, Mark
2 x RJ45 10 / 100Mbit
Alarm: Relay output
Supply voltage: 12 - 48VDC 6.5WATT
Web Management
IP Version: IPv4 / IPv6. TCP Server, TCP Client, UDP Client
Virtual Com
Pair Connection
Supporter: XP to Win10, Server 2003, 2008, 2012
Size: 135 x 88 x 50 mm
DIN bracket
External COM port via Ethernet and Internet
Can also provide Pair connection (back-to-back)
Small size for easy installation
Genuine COM / TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile operating modes
Easy-to-use Windows multi-device server configuration tool
Built-in 15 KV ESD protection for all serial signals
SNMP MIB-II for network management
Configure via Telnet or web browser
Power supply included