Composite Video, BNC, over Single Mode 9/125my fiber cable
Set consists of transmitter and receiver module
Only single fiber (simplex) is used for digital transmission
Feel free to use normal duplex fiber cable, where one fiber is not used
Up to 10km between transmitter and receiver
Stand-alone or rack mounting
Number of channels: 1 channel video
Video input/output impedance: BNC 75Ω
Video input/output Compatibility: PAL, NTSC, SECAM
Video input/Output voltage: 1.0 Voltpp
Bandwidth: 6.5MHz
Bit resolution: 8-bit digital transmission
Signal-to-noise ratio (SNR): 67 dB
Video: 75 Ohm BNC (Gold Center Pin)
Optical: ST
Stand-Alone Power: Screw terminal block
Rack Power: AC cord
Input power requirement: 5VDC/2A
Power adapter: 100V ~ 240VAC
Power consumption: 3W
Stand-Alone Dimensions: 95mm × 70mm × 25mm
Operating temperature: -40°C ~ +75°C
Humidity: 0% ~ 95% (non-condensing)
MTBF: over 100,000 hours
Videograbber HDMI til USB 2.0
Opløsning som videokilde
H.264 komprimeret video
Video og snapshot
8 channel HDMI input module for Video MATRIX
Video bandwidth: 225 MHz / 6.75 Gbps
Input ports: 8 x HDMI
video resolutions: 480i to 1080p @ 60Hz
Audio LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
integration module - plug-in
HDMI to SDI converter up to 300 meters depending on resolution
SDI standards: SD-SDI, HD-SDI and 3G-SDI
Power supplied 5VDC / 2.6A
Can also be used from DVI D for SDI (no sound)
When DVI-D is used kable with DVI and HDMI connectors
Controller / video wall / splitter
Input: 1x Display Port, 1x HDMI + 1 Loopout, 1x DVI
Output: 4x HDMI
Supports HDMI, DVI, Display Port, VGA and YPbPr signals
4K / 2K HDMI
4K image split in 4 x HDMI outputs
PIP (picture in picture) and POP (side by side) multi function
HDMI audio
Supports YPbPr video via VGA input port as well as DVI-D, VGA & amp; HDMI by DVI-I input port
High end 3D motion
Managing via remote or RS232port
