Subcategories
There are 85 products.
3U køler
Dimension: 126,5 x 126,4mm
Supply Voltage 12 Vdc
Height 40mm
DC Operation DC
Width 40mm
Depth 20mm
Power Consumption 2.04W
Maximum Current 170mA
Air Flow 21.6m³/h
Dimensions 40 x 40 x 20mm
Noise Level 33dB
Fan Speed 9000rpm
Bearing Type CeraDyna C
Kan købes i forskellige længder. Klik her....
6 screws per package
AK-CH-S1, pakning á 6 stk.
3½" Bay med udtagelig skuffe.
Til 2½" HDD / SSD i skuffen
Tilbehør til industrikabinetter og rackskabe
Black nuts for cabinets and rack
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Blows air into the rack cabinet
Fan speed 2100-2300 rpm
Blower noise 33/35dBA
Fan dimensions 120x120x25
Max. air flow 55/63CFM
Uses AC and 0.08 A
For 230VAC - mains cable (IEC) included
Replaceable filter.
Filter is inserted
Steel house
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Sucks air out of the rack cabinet
For 230VAC - mains cable (IEC) included
Exchangeable filter on the back of the module.
Filter is inserted
Steel house
3 pin to 2 pin adapter with CB-32C connector
Connect 2 pin connections to standard 3 pin fan adapter.
Connect 2 pin connections to standard 3 pin fan adapter.
Udtrækshylde med skinne, 100 cm
Tråd-gitter til 40 x 40mm blæser
Wire grid for 70 x 70mm fan
Tråd-gitter til 90 x 90mm blæser
Tråd-gitter til 120 x 120mm blæser
120 x 120 x 25mm.
Tachometer
Ball bearings
3-Pin
12VDC 4.8W
153m³/h
70m³/h, 35dBA, 1.7W
80x80x25 mm.
without thermoregulation
ball bearings
Fan
12 VDC
DELIVERED WITHOUT GRILL!
19” hylde udført i stål
1U
650 x 495 x 50mm (D x B x H)
Sort
Medfølger: Skruer, møtrikker til montering i 19" rackskab
Praktisk til løse enheder
Wire grid for 80 x 80mm fan
SFX PSU to ATX(PS2) mounting holes
Designed for use in most ATX or Micro-ATX cases
150mm (L) x10mm (H) x 86mm (W)
5.91" (L) x 0.39" (H) x 3.39" (W)
0.8mm
Cooling fan for 5VDC 0.25A
40 x 40 x 10 mm
3-pin cable
5000 rpm
Regulate pressure and humidity
12 mm screw
Stainless steel
Nut included
Regulates pressure and humidity
16 mm screw
Stainless steel
Nut included
300 Watt PTC heating element for Temperature control
Has a built-in temperature limiter.
With fan - 45m3/hour
Supply voltage 230VAC
Screw terminals
Ambient temperature: -45 - +70°C
Dimensions: 225 x 110 x 80 mm
DIN bracket
PTC Heater element with passive air flow
PTC resistor - temperature limiting
Extruded aluminum
DIN-mount bracket
110 - 240VAC - 75Watt - L, N, Gnd
Continous operation
Heating power adjust to ambient temperature
Flame retardant material
3 clamp connection
IP20
RACK screws and nuts for rack cabinet
Note: 6mm screws and nuts
Compact design
Wide adjustment range
DIN Rail mountable 35mm
Thermostat 0 to 60 °C
Snap-Action Contact
Housing plastic, UL 94V-0, light gray
Max. inrush current AC 16 A for 10 seconds
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V, NO: 5A resistive / 2A inductive@250V 15A resistive/2A inductive@AC120V DC30W(DC24-72V)
IP20
Dimensions 60 x 33 x 43
Thermostat 0 to 60°C
Snap-Action switch
Dimensions 60 x 33 x 43
Max. starting current AC 10
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V
(Special specifiction are welcome)
Dehumidifier with external moisture sensor.
Suitable for Rack cabinet up to 1.5m3
230VAC / 60Watts
Display and membrane keys for setting
RS485 interface
Peltier element and axial fan
DIN mounting
24Vdc supply
Power 200 Watt PTC
-45 to 70℃
IP20 classification
40x47x114mm
DIN assembly 35mm
Max. 90% humidity
DELIVERED WITHOUT THERMOSTAT! Must be ordered alongside.
C19 mains plug up to 16A
For 3-wire mains cable
Used for UPSs and PDUs
