6kVA / 5,4kW Professional UPS with add-on battery boxes. On-line and real sinus. Rack/Tower design. Power management etc.
Professional ON-LINE UPS. Life-critical equipment, Serverrum etc.
UPS is separate battery boxes with Hot-swappable battery design
Double-conversion UPS with noiseless output voltage
Select if the UPS should be installed in the rack or stand as Tower
Nominal input voltage: 200 - 240VAC at 100% load
Voltage range: 110 - 300VAC at 50% load
Output voltage: 200 - 240VAC (230VAC 50Hz)
On-line means that battery backup is always connected - no power switching
Each battery box contains 20 pieces. 9Ah batteries - must be purchased
Intelligent UPS with power management, communications ports, display and alarms
Dimensions: UPS and battery box: 606 x 438 x 133 mm (3U)
Noise level: Less than 58 dbA @ 1 m
Call +45 56 66 20 20 for price
Quantity
On the way in
Product number UPS-6KVA
Specifications
| Operating Temp. | 0 - +40°C |
|---|---|
| Batteri | 20 stk. 12V/7Ah<br>12V/7Ah |
| Forsyning | 1 fastet 230VAC nominel |
| Genopladningstid | minimum 7 timer, afhængig af antal batteri-bokse |
| Mål og vægt | UPS: 580 x 438 x 133. Batteri-boks: 580 x 438 x 133. 20 kg, 57 kg |
| Porte | USB, RS232, model-afhængig |
| Standarder | IEC 62040-1 & IEC-62040-2 (safety og EMC) |
| Tilslutning | Skrueterminal ind/ud og jord |
| Udgangsspænding | 230VAC / 50Hz sinuskurve |
Avoid vital equipment stops due to many minutes of power failure. To prevent loss of data. Alarm low battery and overvoltage mm | UPS 6kVA of electric power is the critical uses and medium-sized installations such as server rooms, hospital equipment, etc. The UPS provides power for several minutes, depending on battery capacity and power consumption.
It provides comprehensive protection which not only provides greater comprehensive power protection against surges and noise on netlinjen filtered and give it a clean voltage by means of the built-in stabilizer AVR (automatic voltage stabilizer). UPS continues for clean and stable power to connected equipment while it is embedded microprocessor controller guarantees high reliability, perfect for any application.
Estimated backup time by 1 battery box and the following load in%:
25 % up to 43 minutes
50% up to 20 minutes
75% up to 13 minutes
100% up to 8 minutes
Estimated backup time, by two battery boxes and the following loads in%:
25% up to 99 minutes
50% up to 46 minutes
75% up to 32 minutes
100% up to 23 minutes
Estimated backup time, by 3 battery boxes and the following load in%:
25% up to 150 minutes
50% up to 71 minutes
75% up to 44 minutes
100% up to 30 minutes
Rev: LO
Other products in same category:
5VDC / up to 4A to USB port, overall power is 48W. USB charging station and hub, 10 x USB3.0 A female, 12V/4A adapter included
48 Watt USB charger with USB 3.0 Hub
10 x USB3.0 A she
8 x USB ports - max. 2.4a to USB port
2 x USB ports - Max. 1A for USB port
Note: Total power for all USB ports is 48 watts.
Button next to the USB port is on / off USB port
USB 3.0 cable from A to B included
input: AC 100-240V
Output: 12V / 4A (48W)
174 x 130 x 47 mm
780.00 kr
Item Number: USB-HUB10-CHARGE
Power socket, 3 x AC socket and 2 x USB socket, 1.8m cable, 250 V, 16A
Upper diameter: 85mm.
Hole cut: 55mm.
3x sockets, 2x USB charging plug (1000mA 5V).
Cable length: 1 , 8 meters.
Operating voltage: 250V.
Power: 16 Amps.
Max height reaches: 335mm.
Material: fire resistant material.
558.00 kr
Item Number: AC-3AC-2USB
18500 3.7V 2040mAh Lithium-Ion battery. 3.8A. +10 ~ + 45 ° C
18500 Lithium-Ion battery
Rated voltage: 3.7V
Capacity: 2040mAh
Max. load: 3.8A
Operating temperature: +10 ~ + 45 ° C
Charging method: CC-CV
Dimensions: 18.5 x 49.5 mm
Weight: 36.5g
Without protection circuit
275.00 kr
Item Number: BAT3.7V2A-LI
Previous
Next


![Powerful charger 10 x USB charging station 2.4a, 1a [USB A female, 5V 21A, 105W] - Danbit](https://www.danbit.dk/15555-large_default/10-ports-usb-ladestation-eu-sort-5vdc-usb.jpg)




