The I-8092F is a 2-axis stepping/pulse-type servo motor control module that can be used on any of the ICP DAS I-8000 and PAC series controllers, and is suitable for general-purpose motion control applications.
The MP-8343/8743/8353/8753 is part of the new generation of programmable automation controllers from ICP DAS.
ViewPAC combines iPAC, graphic display and keypad in one unit. It equips an 80186 CPU (16-bit and 80MHz) running a MiniOS7 operating system, several communication interface (Ethernet, RS-232/485), 3 slots to expand I/O modules, STN LCD and a rubber keypad.
ViewPAC-25W9/ViewPAC-4139 is the new generation WinCE based InduSoft PAC of ICP DAS. ViewPAC combines WinPAC, graphic display and keypad in one unit. It equips a PXA270 CPU (520MHz) running Windows CE.NET 5.0 operating system, variant connectivities (USB, Ethernet, RS-232/485), 3 slots to expand I/O modules, 5.7”/10.4” TFT LCD and a rubber keypad.
ViewPAC-25W9/ViewPAC-4139 is the new generation WinCE based InduSoft PAC of ICP DAS. ViewPAC combines WinPAC, graphic display and keypad in one unit. It equips a PXA270 CPU (520MHz) running Windows CE.NET 5.0 operating system, variant connectivities (USB, Ethernet, RS-232/485), 3 slots to expand I/O modules, 5.7”/10.4” TFT LCD and a rubber keypad.
The MP-8343/8743/8353/8753 is part of the new generation of programmable automation controllers from ICP DAS.
The MP-8343/8743/8353/8753 is part of the new generation of programmable automation controllers from ICP DAS.
The VP-2201-CE7/VP-4201-CE7 are CE7 based ViewPAC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
The VP-2201-CE7/VP-4201-CE7 are CE7 based ViewPAC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
ViewPAC combines WinPAC, graphic display and keypad in one unit. It equips a PXA270 CPU (520MHz) running Windows CE.NET 5.0 operating system, various Communications (USB, Ethernet, RS-232/485), 3 slots to expand I/O modules, 3.5"/5.7"/10.4" TFT LCD and a rubber keypad.
ViewPAC combines WinPAC, graphic display and keypad in one unit. It equips a PXA270 CPU (520MHz) running Windows CE.NET 5.0 operating system, various Communications (USB, Ethernet, RS-232/485), 3 slots to expand I/O modules, 3.5"/5.7"/10.4" TFT LCD and a rubber keypad.
ViewPAC combines WinPAC, graphic display and keypad in one unit. It equips a PXA270 CPU (520MHz) running Windows CE.NET 5.0 operating system, various Communications (USB, Ethernet, RS-232/485), 3 slots to expand I/O modules, 3.5"/5.7"/10.4" TFT LCD and a rubber keypad.
The iPPC-6631-WES7 and iPPC-x731-WES7 series are WES7 based Panel PC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
The iPPC-6631-WES7 and iPPC-x731-WES7 series are WES7 based Panel PC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for embedded network for machine control, such as textile machinery, printing machines, injection molding machinery, or packaging machines, etc.
The MP-8343/8743/8353/8753 is part of the new generation of programmable automation controllers from ICP DAS.
DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for embedded network for machine control, such as textile machinery, printing machines, injection molding machinery, or packaging machines, etc.
DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for embedded network for machine control, such as textile machinery, printing machines, injection molding machinery, or packaging machines, etc.
CANopen, a kind of communication protocols, is based on the intelligent field bus (CAN bus). It was developed as a standardized embedded network with highly flexible configuration capabilities.
XW511i kan anvendes sammen med følgende serier: uPAC-5000, LP-51xx og WP-5000.
Der er plads til ét XW-kort i en PAC (Programmable Automation Controller).
XW511i tilbyder:
4 stk. RS-485 porte med 16C950 kompatibel controller og 115200 bps max.
Alle RS-485 porte har en isolation fra logik til omgivelser på 2500VDC.
CANopen, a kind of communication protocols, is based on the intelligent field bus(CAN bus). It was developed as a standardized embedded network with highly flexible configuration capabilities.
CANopen, a kind of communication protocols, is based on the intelligent field bus(CAN bus). It was developed as a standardized embedded network with highly flexible configuration capabilities.
iP-8000-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
iP-8000-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
iP-8000-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
XW508 kan anvendes sammen med følgende serier: uPAC-5000, LP-51xx og WP-5000.
Der er plads til ét XW-kort i en PAC (Programmable Automation Controller).
XW508 tilbyder:
8 stk. RS-232 porte med 16C950 kompatibel controller og 115200 bps max.
iP-8000-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
XW509 kan anvendes sammen med følgende serier: uPAC-5000, LP-51xx og WP-5000.
Der er plads til ét XW-kort i en PAC
XW509 tilbyder:
4 stk. DI-kanaler til våde kontakter kan Source/Sinke har 60VDC OVP med 3750Vrms isolation.
4 stk. DO-kanaler af sink-typen med 3750Vrms isolation og 1.4A overbelastningsbeskyttelse.
2 stk. RS-232 med 16C550 kompatibel controller og 115200 bps max.
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.
XW506 kan anvendes sammen med følgende serier: uPAC-5000, LP-51xx og WP-5000.
Der er plads til ét XW-kort i en PAC (Programmable Automation Controller).
XW506 tilbyder:
6 stk. RS-232 med 16C550 kompatibel controller og 115200 bps max.
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.
Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.
The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
he ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
