50 ohm terminator, typically to ARCnet (BUS-type)
32.00 kr
Coax cable / Antenne plug
Menu
Coax cable / Antenne plug
The Coaxial cable was born in 1880 and is a type of electrical cable having an inner conductor surrounded by a tubular insulating layer, surrounded by a tubular conductive shield.
All coax cables also has an insulating outer sheath or jacket. A coaxial cable is a transmission line used to carry high frequency electrical signals with low loss. It is used for broadband network cabling, cable television signals and connects the radio transmitters / receivers for their antennas.
This is very important that a coaxial cable is made from high-quality materials, as 100% pure copper and that the tubular insulating material provides high isolation, and here is foam-isloator best.
it is important that a coaxial cable is as short as possible as it works signaldæmpene. A coaxial cable for radio transmitters is 50 ohms - the resistance is called impedance and should be appropriate for the radio transceiver - opposite the device (eg. An antenna) must be designed with the same resistance. Possibly. mismatch will provide reflections of the cable and destroy / interfere with signal transmission. Video Signal transmission should the impedance is 75 ohm (RG59)
A transmitter and receiver sees a coaxial cable which many complex passive components - capacity between conductor and shield, coils in series, and an ohmic resistance (loss in copper) .
a loss in a coaxial cable applies to both transmitter and receiver. A powerful coaxial cable for example. LLC400 (10mm thick) provides approximately 22dB loss per 100meters at 2.4GHz (WiFi). A LCC200 (5mm thick) gives a loss of some 100meters per 55dB at 2.4GHz. Remember to compensate Coax cable loss with passive Gain antenna if possible. Avoid any active 2-Wejs signal amplifiers.
Remember: Good quality cable offers the best connection.
There are 93 products.
Transient fuse with N-type male/N-type female connector
Up to 6GHz
Cannot protect against direct lightning strikes
Connect heavy-duty cable between the unit and the nearest ground
444.00 kr
Antenna cable adapter
RSMA female to RSMA female
External thread and stud for external thread and stud
gold plated
50 ohms
139.00 kr
Antenna adapter with N-type connector, female - female
used for collection of cables with N male
114.00 kr
Antenna adapter with N-type connector, Han-he is used eg. For direct mounting of antenna on AP
114.00 kr
50-Ohm BNC T Connector
T-LED for Ethernet and ARCnet cables.
Can be used for analog video
18.00 kr
Antenna adapter
nut + hole (SMA)
exterior thread + hole (TNC)
73.00 kr
SMA adapter
exterior thread + tap
Inside thread + tap
73.00 kr
Converter cable from MMCX to R/SMA female, 20 cm long, RG316
293.00 kr
Low loss coax cable with N-male/male
Low loss at 10 meters: 2.2dB at 2.4GHz
LLC400, diameter approx. 1 cm
N-male to N-male
Good and robust cable
Always vulcanize joints - outdoors
Length: 1 meter
256.00 kr
Antenna cable for GSM/LTE
SMA male to SMA female
Flange + pin for external thread + hole
50 ohms
LLC200 coax cable (55db per 100m at 2.4GHz)
Gold-plated SMA connector
Color: Black
Length: 1 meter
251.00 kr
Adapterkabel R/TNC han til SMA-type han, 0,6 m, LLC100 kabel, Linksys
166.00 kr
RPTNC male to N-Type male coax cable of 1 meter
TNC - Round + hole
N - N he
For e.g. Linksys AP, Cisco
LLC200 coax cable
Black
205.00 kr
Antenna cable for Wifi / GSM
RSMA male to SMA male connector
Circumference + hole to Circumference + pin
50 ohms
LCC200 coax cable (55db per 100m at 2.4GHz)
1 meter
205.00 kr
Showing 61-80 of 93 item(s)