Gateway bridge for the AIRPRO models, so that data from them can be uploaded to a common server on the Internet.
Instructions for setting up your own server are included, for this you need a knowledge of programming in the Windows environment.
The device is configured via the USB connection.
Data from AIRPRO can be saved on a PC as an excel file for later use or documentation.
Absolute Maximum Rating
Supply Power Max. +5.5 Volts
Storage Temperature -40º to 85º Celsius
Voltage Ripple +-2%
Recommended Operating Condition
Operating Temperature -20º to 45º Celsius
Humidity Max 95%, Non condensing, relative humidity
VDD +5 Volt +- 5%
Working mode
(reading BLE and send to server)
Max.: 436 mA
Average: 83 mA
Wi-Fi RF Specification
Wireless IEEE 802.11b/g/n (single stream)
Network mode infrastructure, Ad-Hoc
Data rate IEEE 802.11b, 1-11Mbps
IEEE 802.11g, 6-54Mbps
IEEE 802.11n(2.4GHz), 7.2-72.2 Mbps
Frequency band 2,400 – 2,484 GHz
Number of selectable Sub
channels
14 channels
Channel Bandwidth 20MHz
Modulation OFDM, DSSS (Direct Sequence Spread Spectrum), DBPSK,
DQPSK, CCK, 16QAM, 64QAM
Maximum receive input level - 10dBm (with PER < 8%@11 Mbps)
- 20dBm (with PER < 10%@54 Mbps)
- 20dBm (with PER < 10%@MCS7)
Minimum receive input level - 87dBm (typ. with PER < 8%@11 Mbps)
- 70dBm (typ. with PER < 10%@54 Mbps)
- 70dBm (typ. with PER < 10%@MCS7)
Transmit Power 17dBm (typical)@ 802.11b
13dBm (typical)@ 802.11g
11dBm (typical)@ 802.11n
Carrier Frequency Accuracy +/- 20ppm (crystal: 26MHz +/-10ppm in 25 o C)
Antenna 2dBi dipole antenna
Range up to 100M meters (in open area)
Security WPA/WPA2
BLE RF Specification
Transmit Power Max.: 4dBm
RF Power Accuracy +- 4 dB
Receiver Sensitivity -96 dBm @250kbps, 0.1% BER
-90dBm @1Mbps, 0.1%BER
Maximum Received Signal
Strength at <0.1% PER
0dBm
Frequency Deviation +-250 kHz @BLE
Antenna on board PCB antenna
Range 30M in open space
Dimension
Dimensions L x W x H (mm) 54 x 41 x 18 (not including dipole antenna)
