Residual sale
image sensor: 2 megapixel CMOS, 0.2 Lux
Lens: Supplied without lens
KAM-BOX2MP + Underbits Manual and Automatic Aperture (Auto Iris) < BR> Video Resolution: 1600 x 1200 pixels at 15 FPS
Compression: H.264 / M-JPEG
Ethernet: 10/100 Base-T
Network Protocols: TCP / IP, UDP, DNS, DDNS, DHCP , SMTP, HTTP and PPOE
Alarm: Motion sensor, Sensor Alarm or by loss of video signal
SD card: KAM-BOX2MP + supports recording on SD card.
RS485 Connection: For pan, Tilt and Zoom control < Br> Digital I / O: 1 Input / 1 Exit
Dimensions: 62 x 68 x 155 mm (H x B x D)
Operating temperature: 0 - 50 ° C
Power supply: 12VDC 1A, Power supply supplied Not
Use: DC12V / 1.5Arq
comb-box2mp + can be expanded with an SD card on max. 32GB. With the SD card insert it is possible to record both on the map (backup) and at the same time via network. When the card is filled, the oldest recordings are overwritten.
The camera can record on the card if the network is temporarily down. The camera can be set to save only still images on the map, which corresponds to approx. 30 days of recording. Recordings stored on the SD card can be viewed over the network. Several different lenses are lifted for comb-box2mp + (see prices below).
Software (NVC, Network Video Controller) supplied that can handle up to 36 cameras. comb-box2mp + can take still images from a minimum of 1 second and send the image to FTP, or other local storage device.
Accessories: lenses for comb-box2mp +
8-ports managed switch
Kan tilsluttes iPad og IiPhone 4G direkte.
Converts the AUI port to the fiber cable connection.
Only intended for mounting directly on the network card or HUB
part for isolating the PC from the network or against the frame potential; differences between different supply networks
Max. cable lengths: AUI 50 meters, fiber optic 2000 meters
Power supplied from the AUI port that delivers 10 - 15 VDC / 200 mA
Plugs: DB15 male connector for AUI port and ST connector for fiber optic cable
Unmanaged 10/100Mbps switch
