Security-hardened, GPS-referenced Stratum-1 NTP v4 network time server.

Fast - up to 20,000 NTP polls per second for precise client synchronization

Highly stable, temperature-compensated backup crystal oscillator (TCXO)

Network-optimized Gigabit Ethernet (GbE)

Advanced 72-channel GPS receiver for reliable reception of the GPS satellite system.

Powerful, easy-to-use web interface with command-line interface

IPv4 and IPv6 Internet Protocols

Simple Network Management Protocol (SNMP v1, v2c, v3) monitoring. Full MD5, SHA1

SHA256 NTP authentication for improved security.

Peer-to-multiple external NTP servers for improved redundancy.

Warranty, free firmware updates and lifetime support.

CE and UKCA compliant with full EMC and electrical safety test reports.

Operating temperature: -20 to +60°C

MTBF: 143,000 hours

Supply voltage: 100-240VAC, 10W

Dimensions: 1U, 220 x 120 x 44 mm

Weight: 1.2kg

4 port power rail with port ON/OFF

IEC connector - 1 x IEC14, 4 x IEC13

Max. 10Amp

With power measurement

With sensor input

RS232 interface

RJ45 for sensor

Power ports can be turned on and off when preset sensor thresholds are exceeded.

Precise current measurement of up to 4 electrical devices

Connection to plug-and-play sensors

Dimensions: 187 x 95 x 43 mm

Temperature: 0 to +50°C

Temp/humidity meter with RJ45 for GUDE

Up to 40 meters

Temperature: -20°C to +80°C at ±2°C (maximum) and ±1°C (typical)

Humidity: 0-100% at ±3% (typical) and 10-80% at ±2% (typical)

Sensor housing: plastic

Dimensions: 42 x 20 x 35 mm

Weight: 29g

2 port power rail with port ON/OFF

IEC plug - 1 x IEC14, 2 x IEC13

Max. 10Amp

With power measurement

With sensor input

RS232 interface

RJ45 for sensor

Power ports can be turned on and off when preset sensor thresholds are exceeded.

Precise current measurement of up to 2 electrical devices

Connection to plug-and-play sensors

Dimensions: 187 x 95 x 43 mm

Temperature: 0 to +50°C

Double temperature regulation
1 x Socket for external cooling unit
1 x Socket for external heating unit
Temperature regulation from -30°C to 105°C
2.4 GHz Wi-Fi
LCD screen
Can be controlled from smart APP
Power voltage: AC 220-250V
Temperature accuracy: ±1%

GPS controlled time server for networking
NTPV4 protocol
GPS Timing at satellite lock: 15nano seconds
16 channel receiver that reduces the risk of signal loss
10 / 100baset Ethernet
HTTPS, HTTP, SSH, SCP, SNMP V1 / V2 / V3, SFTP, FTP, DHCP, DHCPv6.
SNMP V3
Linux Core
Low power consumption Only 7W
230vac 50-60Hz 0.1A
Operating temperature 0 - 50 °
comes with multi-antenna, wall mounting and 30 M RG58 antenna cable

12-port PDU with individual on/off and integrated power meter via network
Network monitoring with e.g. PRTG, Icinga, Nagios, Power IQ, Tivoli
19" rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with Password
Scheduled on/off per port
Programmable sequential power up
12 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature/humidity sensor with alarm
12 x Watchdog with ping for each connected PC
SNMP Get/traps and email support
Supports iPhone and Android

8 port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

4 Port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

8 port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

4 Port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

Box temperature and humidity sensor for wall mounting
Sensor detected automatically
Can be connected with RJ45 STP cable up to 40 meters from the control
Temperature and humidity range: -20 ° C to + 80 ° C, + / -0.5 ° C, 0 to 90% rH, +/- 3%

Plastic sensor pipe, length: 132 mm (incl. bolted joint) diameter: 15 mm

Temperature measuring range: -20 °C to +80 °C at ±2 °C (maximum) and ±1 °C (typical)

Temperature and humidity sensor, can measure in a wet environment

Sensor is detected automatically (plug-and-play with other GUDE devices)

Length: 2.3 m with RJ45 interface

-20 °C to +80 °C

Temperature sensor +/- 0.5 ° C, humidity +/- 3%,
Sensor is automatically detected by equipment
Length: 2.3 m with Mini-DIN connector
Accessories for: GUDE NPOWER , GUDE PDUs, Remote Control

3 x tænd/sluk, potentialfri relæ ouputs, 230 V AC, 16 A / 24 V DC, 10 A
1 x strømforsyning med 12-24 V AC / DC spænding
1 x RJ45 Ethernet
3 x Watvhdog til at overvåge forbrugere (ICMP / TCP)
1 Mini-DIN-stik til valgfri sensor eller seriel interface (RS232)
Programmerbar tænd / sluk-sekvens
SNMP Get/Traps (SNMPv1, SNMPv2c)
Understøtter Android og iPhone
Syslog og E-mail
DIN-rail montering i servere racks

4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting

The ideal choice for Server Room and Server rack monitoring.
4 x potential-free switching relay outputs - 36VDC / 3A switches
Large LED display for power measurement, IP address, sensor data and error reports
4 x Watchdog for monitoring connected PCs (ICMP / TCP)
12 x passive signal inputs - (contact inputs) for Phoenix plugs
4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN
Features, limit values, alarm receivers set up on the device via supplied software
2 x 12VDC power supply inputs (redundant)
PoE - Power over Ethernet for 2111-2 the model.
Free APP for Android and iPhone
SNMP Get / Traps (SNMPv1, v2c, v3)

automatisk transfer switch (ATS) til skifte til en alternativ strømforsyning
Typisk overførselstid 7 - 10 ms.
Brugerflade via web-browser med Password
Programmerbar sekventiel power up
6 x IEC C13 udgange 10A 
1 x IEC C19 16A
3 x RJ45, LAN og Sensor
2 x IEC C20 16A strømforsyning
SNMP Get/traps og e-mail support

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C19, 16A 
1 input „von USV“ IEC C20, 16A 
6 x IEC C13 udgange 10A 
1 x IEC C20 16A  Strømforsyning
Lavt internt strømforbrug

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C13, 10A / IEC C19, 16A
1 input „von USV“ IEC C14, 10A / IEC C20, 16A
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
1 x IEC C14 10A/ IEC C20 16A Strømforsyning

4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps 

4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps 

20 ports PDU with individual and total power meters via network
Integrated residual current measurement type A
User interface via web browser with Password
16 x IEC C13 outputs 10A
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

20 ports PDU with individual and total power meters via network
User interface via web browser with Password
16 x IEC C13 outputs 10A & nbsp;
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

7 ports PDU with overall power meter via network
can measure residual current measurement
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C13 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for external sensor, temperature, moisture, hPascal
SNMP Get / traps and e-mail support

7 ports PDU with overall power meter through network
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C7 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for remote sensor (temperature, humidity, hPascal
SNMP Get / traps and email support

12 ports PDU with individual on / off with individual and overall power meter via network
19 "1U rack mount
Integrated power measurement and monitoring per output
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping off Every Connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android

12 ports PDU with individual on / off and individual and overall power meter via network
19 "1U rack mount
Integrated power measurement and monitoring per power outlet
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
8 x Schuko outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping off & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android

4 ports PDU with individual power on / off and total current meter via network
1 x Alternative Type E connector (CEE 7/3) max 16A
User interface via web browser with Password
Programmable sequential power up 4 x Schuko outputs type F, max. 16A
4 x Watchdog with ping of & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supporting Iphone and Android

8 Port Networked PDU with Individual On / Off
19 "Rack Mount, 1U
User Interface via Web Browser with Password
Scheduled on / off per port
Programmable Sequential Power Up
8 x IEC C13 outputs, max. 10A - front mounted plug
2 x RJ45 Inputs for temperature and temperature / humidity sensor with alarm

1x Seriel Connection for control
8 x Watchdog with ping of each connected PC
SNMP Get / traps and e- mail support
Supports Iphone and Android

Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable

Active GPS signal amplifier with 8 outputs.
With TNC connector.
1U rack.
Anvendet example. to signal power several atomic clock-SAT TR / TRD time-servers

BNC Extension Cable 10 m 50 Ω 2-wire cable 

Forlængerkabel til DCF antenne, 50 meter

Tilbehør, 10 m forlængerkabel til ATOMUR-SAT

30 meter kabel til GPS antenne

Accessories
DCF 77 kHz rod antenna w/5 meter cable
For ATOMUR-SAT-T+
Must be mounted horizontally (landscape)
Must face south (Frankfurt, Germany)
Is sensitive to EMC noise which can interfere with reception

GPS-referenced Stratum-1 NTP server

> 10,000 NTP queries per second (approximately 600,000 per minute)

Built-in TCXO (Temperature-Compensated Crystal Oscillator) – ensures continued accuracy in the event of GPS failure

32-channel GPS antenna provides stable reception

Gigabit Ethernet (1GbE) with IPv4 and IPv6

NTP authentication: MD5, SHA1 and SHA256 for high security

Web interface and CLI for configuration and monitoring

RS232 output with timecode

Universal AC/DC power supply

NTP Server - Atomic clock for 19 rack mounting.

Signal from DCF77 in Frankfurt (77.5kHz)

Not recommended in EMC noisy environments.

Rod antenna with 5 meter cable with BNC male

Purchase antenna cable 50 ohm, BNC male/male

Additional purchase BNC-ASSEMBLE

With network port and serial port

1U for rack mounting

Powered from 230VAC.

NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal

77.5kHz receiver. Not recommended in EMC noisy environments

Stand-alone NTP time server

Dynamic IP address from DHCP or manual selection of IP address

Antenna is active ferrite antenna included

LCD display for date and time

Built-in battery back up RTC

Signal strength display

Configuration via Web browser, Windows or Linux tool