Switch

Quad screen segmentation with switch
4 x HDMI inputs 4K30Hz, 1080p/i
1 x HDMI output 4K30Hz, 1080p/60Hz
HDMI 1.4, HDCP1.4 and backwards compatible
Supports audio input
Bandwidth: 330MHz
Max. data rate: 10.2Gbps
In/out TMDS, DDC signal
Temp: -15 - +55°C
Supply voltage: 5VDC PSU included
Dimensions: 148 x 63 x 23 mm
Weight: 206g

Remote switch for 2 PCs and 1 HDMI monitor.
Button on the front or remote control can be used to select the PC input.

VGA and Audio Matrix, 2 in 4 out
2 x VGA inputs to 4 x VGA outputs
All inputs can be routed out of outputs
Possibility of scanning
Remote control included
Can be operated from the front
Resolution up to 1920 x 1440 points
AC adapter included

Controller / video wall / splitter
Input: 1x Display Port, 1x HDMI + 1 Loopout, 1x DVI
Output: 4x HDMI
Supports HDMI, DVI, Display Port, VGA and YPbPr signals
4K / 2K HDMI
4K image split in 4 x HDMI outputs
PIP (picture in picture) and POP (side by side) multi function
HDMI audio
Supports YPbPr video via VGA input port as well as DVI-D, VGA & amp; HDMI by DVI-I input port
High end 3D motion
Managing via remote or RS232port

DP manual switch with pushbuttons.
Wall mountable.
Plastic cabinet.
2 ports (1 x In / Out, 2 x Switch).
40x26.5x42.5mm.

300 MHz (-3 dB) RGB video bandwidth
Compatible with VGA-QXGA and HDTV component video signals
Buffered throughput for input 1
ID bits from inputs 1 and 2 are routed to the output
Auto-input switching
Contact closing of remote control
REFURBISHED!

16 port 4K HDMI Multi-Viewer
16 x HDMI in with 1080p
1 x HDMI out 4K @ 30Hz
HDMI 1.4, HDCP 1.4, DVI 1.0
PIP, PAP, Full Screen, Dual Mode and Quad Mode
Change via pushbutton or IR

HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.

4 x HDMI inputs for 1 HDMI output
The 4 inputs can be combined into 10 variants
Seamless switching of HDMI signal
Supports Audio switching
Resolution: up to 4K@30Hz input
Supports IR remote control
Push buttons on the front for output mode selection
Bandwidth: 6.75Gbps
Operating temperature: 0 - +40°C
Supply voltage: 12VDC PSU included
Power consumption: 8 Watts
Cable distances, max.: Input 8m, output 10m
Dimensions: 191 x 113 x 17 mm
Weight: 480g

HDMI, HDCP and DVI compatible 32 x 32 MATRIX
Modular - input and output modules
Input and output modules can be mixed and added to 8 × 8 input module and output module
4 input and 4 output modules with HDMI, DVI
VGA module is only input
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
480i to 1080p and 4K2K @ 24/25/30 Hz
Control of the matrix via the front panel, RS-232, Telnet, WebGUI controls
10 available preset settings
3 EDID modes: Standard, Dynamic and Manuel
Power supply with redundancy
HDMI cable up to 15 m
HDbaset 5Play ™ convergence support HD video, HD audio, PoC
Ethernet and IR / RS-232 control

8 channel HDMI input module for Video MATRIX 
Video bandwidth: 225 MHz / 6.75 Gbps
Input ports: 8 x HDMI
video resolutions: 480i to 1080p @ 60Hz
Audio LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
integration module - plug-in

Video Bandwidth: 225 MHz / 6.75 Gbps to 8 x HDMI female 
Resolutions: 480i to 1080p
Audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
Outputs 8 x HDMI
8 x uncompressed AV and data

Perfect table box to the meeting room for viewing on a large screen
can be mounted under the table
6 x video inputs selected for 1 x output
4 x HDMI input
1 x DisplayPort
1 x VGA + audio
1 x HDMI output for local monitor
1 x RJ45 for remote receiver with HDMI out (extras)
Sending of CAT6a cable up to 100m in HD 1080p
4K UHD (3840 x 2160) up to 70m
Front panel push button and IR remote control or serial or GUI control
EDID and HDCP function
USB 2.0 port for Pass Through
Size: 135 x 100 x 40 mm

HDMI Multi Viewer (HD in, 4K out)
Support 8 HDMI inputs, one HDMI output
Support 8 HDMI signal screen segmentation
Support 8 HDMI single picture signal seamless switching
Support IR control
The input resolution support up to 1080P,720P,1080i,1024x768,1360x768 etc.
The output resolution support up to 1080P@60HZz 3840x2160@30Hz
Support audio and video superposition
HDMI input and output transmission distance:high speed HDMI cable can reach 15Mm
Power Adapter : DC12V/1A
Net weight:approx. 792 g
Size: 252mm x 105mm x 25mm

4 x HDMI inputs to 4 x HDMI outputs
Viewing the screens 4 are summarized on a screen
display screen 1 distributed over 4 skærme
Can used with DVI adapters

Mix HDMI video from 2 sources of 1 screen
PIP image in image
PBP image in picture
Screen layout (lock) function
Multi-format 2 in 1 out-switch
2-channel HDMI Video Swappable
Scales Resolution Up or Down
Up to 4K UHD (3840 x 2160 @ 30Hz, 4: 4: 4)
Audio out as Analog and Toslink SPDIF
Supports more than 40 Presets
Complete Video Control of Brightness, Contrast, Saturation, Tint, etc
OSD / IR / Button / Serial Interface
HDCP Compatible, 3D Video and Blu-Ray
Plug-N Play - System, No Software Installation
Supply: 12VDC

2-port KVM switch
1 x DVI 1.0 inch (from each PC)
1 x USB BM 2.0 (from each PC)
3 x USB 2.0 for mouse and keyboard on the control side
Sound in and out
EDID support
Resolution up to 3840x2160 @ 30HZ (NOTE 30HZ!)
Change from button on the front
Cables must be purchased, available in several lengths
Can function as a DVI or USB switch, requires supplied power supply

Connect up to 5 PCs or HDMI sources to 1 monitor
Remote control included
Switching with push button or remote control for HDMI 1.4 and HDCP 1.2
Resolution up to 1080i / 1080p
Power supply included 5VDC / 1.2A

Composite Video Switch
8 Input BNC Hier to 1 Output BNC He
Supports lower power consumption at full load below 500 mA
AC / DC Adapter- 12 VDC, 300 mA
Video Distortion: 0 .5 DB
Remote control IR
for wall mounting
175 x 81 x 25 mm

2 port mechanical switch to VGA
Max. Resolution 2048x1536
Push buttons on front
1 x i/o - vga female
2 x A/B - VGA female
Works both ways
Recommended only for test use
Remember! there is no screen emulation as it is mechanical!