PCMCIA card reads with USB Interface reads from 20MB to 20GB Memory Ata Card not reading all cards!
USB 2.0, USB 1.1
Power from USB or AC / DC power adapter
read and write to PCMCIA hard disk, ATA Flash. DOES NOT READ SPECIAL CARDS!
read and write to CF-I, CF-II Smart Memory, Memory Stick, Micro Drive, Multimedia Card, Secure Digital Card and XD
Card use of additional Flash adapter.
Complete Plug and Play
USB Bootable from PCMCIA hard drive (depending on system BIOS support)
Serial ATA bootable from PCMCIA hard drive
Up to 480 Mbit/sec (60 MB/sec) data transfer* for USB 2.0, 10 times the speed of USB 1.1
Up to 1500 Mbit / second (150 MB / sec) data transfer to eSATA
USB version works under Windows 98SE, Me, 2000, XP, 7, 2003, Windows 10
Note! Certain cards are not supported Memory card and Verifone card. Buy the cards together with the reader to be sure!
Will not be returned because card cannot be read. Send any short, then we test whether the reader can read them.
950.00 kr
Excl. VAT
Quantity
Physically in stock
Product number PCM-USB+A
Note: Panasonic P2 card is a 32-bit card bus device and is therefore not supported with Pocket Udd. Desktop Card Drive, PCI
Cardbus / Pcmcia -Controller and ExpressCard Cardbus Adapter support all Panasonic P2 card.
Don't read card with built -in battery!
Flex cards that are convexes read. Not quite smooth cards!
doesn't support any special software card, sound card and program card. PCMCIA Scram Card, Pansonic P2 card, PCMCIA Linear card, flash memory card and network card cannot use our card reader. If your memory card is not ata, we will not suggest your purchase.
We will gladly test their cards if it is sent to us! Contact us and hear more
Other products in same category:
8 in 1 flash card reader to USB 3.0 SD + Micro SD + CF + XD + MS + M2
Card Reader 8-In-One USB 3.0 Bus Powered.
2 x SD and 2 x Micro SD available
SDHC/Micro SDHC to SDHC/Micro SDHC
Compliant with the USB2.0 / 1.1 specification
Support CompactFlash Ultra DMA mode 6
Supports major memory cards including the SDXC
Plug & play simplicity
Auto detect card memory
support USB3.0 Ultra Hi speed transfer 100MB/s
Support 5Gbps Super SpeedU / 480Mbps high speed and full speed transfer rates
Supports bus powered modes
155.00 kr
Item Number: USB-FLASH-CARD
USB Flash card reader, TF, CF, SD, Mini SD, SDHC, MMC, MS, XD
USB-B Mini 2.0 female (USB A to B cable medføger)
Supports: TF, CF, SD, Mini SD, SDHC, MMC, MS, XD
Power supply: 5VDC (via USB)
Cable length: 41 cm (Ex. connector)
Dimensions: 69.5 x 12.5 x 41 mm (W x D x H)
123.00 kr
Item Number: USB-FLASH-READ
SATA HDD 2½" to 2½" IDE cable (44 pin) adapter.
Support 5V SATA III, SATA II and SATA I Drive and SSD
SATA II 3Gbps Controller Mini Vertical Adapter Card
44 Pin 2.0 mm IDE male connector for 5V DC and ATA signals
PCBA and SATA drives powered by Pin 41 & 42 of IDE connector 5V input
Compliant with Serial ATA 2.6
Jumper setting supports IDE Master, Slave and cable selection modes
233.00 kr
Item Number: CNV-IDE44SATA
Clearance sale: 5¼ Multi Front - card reader
Module that brings together a range of different functions in the front of the PC. USB-MULTI has built-in USB, FireWire, flash card reader, audio input/output and power supply (5V and 12V).
Cables are included that connect the various connectors to the existing connectors in the PC. For example, connect the USB cable to the USB connector that is already there. There is no USB or FireWire interface in the device, they must be in the PC already. Fits in all DANBIT 19” cabinets with a free 5¼” space.
Flash card reader/writer for the following cards: Compact Flash (Type I & II), Microdrive, SmartMedia (SM), MultiMedia Card (MMC), SecureDigital (SD) and Memory Stick (MS)
Audio: 1 x stereo outputs 2 x stereo inputs Mini jack
USB: 3 x USB 2.0 (Hi-Speed) 480 Mbit with A-type female connector
FireWire: 2 x FireWire 1394a 400 Mbit female connector
Voltage output: 1 x 12 VDC and 1 x 5 VDC, max. load 500 mA (can be used to power external devices)
178.00 kr
Item Number: USB-MULTI
Previous
Next







