I/O-modul 6 digitale input og 6 relæer, MODBUS
Ethernet to 6 Channel Isolated Digital Input / 6 Relay
Modbus TCP
Peer-to-peer fashion
4 single ended input +/- 10V analog, +/- 5V, +/- 2.5V ... +/- 20mV
128kS / s for each channel sampling rate
FIFO: 4000 samples - memory 30 million data samples
24bit resolution
2 x analog output +/- 10V, +/- 5V, 0-5 / 10V
analog output 12bit resolution
Trigger mode: SW, Ext analog
1 x 32bit counter, max. 30kHz
1 x Encoder input: Qadrant / CW / CCW and pulse
3 x digital inputs (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm | Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C
ETHIO4AI2AO7IO-PI is a data monitoring device at high speed with a built-in Ethernet communication port for data transfer over a network and includes four high-speed 24-bit differential analog input channels (128 kHz sample and hold for all 4 channels), two analog output channels, 3 digital input channels, four digital output channels and 1 encoder-input channel.
the module provides a programmable input range on all analog channels and the digital output can be set to output the short-circuit and overload protection. 1 Encoder input channel can be configured as Quadrant, Pulse / Direction or CW / CCW input mode. ETHIO4AI2AO7IO-P-I also provides 4 kV ESD protection and 2500 VDC intra-module isolation. In addition, include 24-bit ADC built Sinc3-filtering to adjust the appropriate sampling rate and filter the modulator signal and noise. ETHIO4AI2AO7IO-P-I is very suitable for a variety of applications for mobile / portable measurement, but also for precision signal measurement.
Ethernet to 6 Channel Isolated Digital Input / 6 Relay
Modbus TCP
Peer-to-peer fashion
Single-Mode Fiber (Multi-Mode optional)
1-Channel Duplex Rs485
Point-to-Point or Daisy-Chain (M485-FIBER-ST is needed)
DC input 5V (< 3W)
Operating tempeture: -45 C~+75 C
Up to to 115.2Kbps data rate
HMI Panel with LCD Display, Ethernet and Com Ports
Can be connected to most of the manufacturer's I / O modules
Power supplied from PoE or 12 - 48VDC / 2.5 Watt
RS-485 (with self-tunes) < Br> RS-232 (RX / TX / GND)
RTC - Real-time tour
GUI design
Free HmiWorks development tools
supports C and Ladder designer
design suggestions from manufacturer
Modbus TCP / RTU protocol
Dim: 140 x 87 x 41 mm
12.4 cm DIN rail with GND
stainless steel