RS485 / RS422 / RS232 Master Gateway to Meter-Bus Slaves (sensors, actuators, etc.)
Supports up to 100 Meter-Bus meters (slaves)
MODBUS RTU function codes: 0x03 and 0x04 readdata
Selection of serial port, only one can be selected to be active
Baud rate x 2 (M-bus and COM port can be selected at different speeds)
Baud rate M-bUS: 300-2400 bps
Baud rate COM port: 300-115200 bps
Transparent data - no protocol conversion
M-BUS connection, 2-wire, max. 350meter.
Greater distance up to 5km requires a number M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm
Removable terminal blocks
Operating temperature: -25 - + 60°C
DIN mount
Robust plastic case
M-Bus ( "Meter-Bus") is a European standard for remote reading of gas meters, heat meters and other electricity meters. This bus meets the special requirements for remote or battery-powered systems, including consumption device sensors, various sensors and actuators. When incorporated into a network system, supplying the meters the measured data to a common MASTER, for example, can be a PLC, PC or handheld computer connected periodically to read all building meters. An alternative method to collect data centrally is to transmit meter readings via a modem.
M485-MBUS-MASTER-I is specially designed to convert 2-wire M-Bus bus, connected to the meters to a serial port (COM port). There is a choice of RS-232, RS-422 or RS-485th Only one of the three can be selected to be COM connection to the master (PC, PLC, etc.). On M485-MBUS-MASTER-I are two rotary switches to serial port and M-Bus port baud rate.
When communicating using M485-MBUS MASTER In transparent data communications (no protocol conversion). Through these two options, it is easy to communicate with ethver standard M-Bus slave (measuring device with M-BUS).
Mains adapter - switch mode type
110-240 VAC to 12VDC/1.5A
DC plug: 5.5/2.1 mm
1 meter cable
PROFINET / MODBUS konverter Gateway
PROFINET klasse B og RT klasse 1
1 x RJ45
Cyklisk tid: 1ms (min)
Generisk GSDML-fil (version 2.25)
Max længde af input/output data er 512/512 bytes
Understøtter Modbus Master og Slave mode
Understøtter Modbus RTU- og ASCII -format
RS232 or RS422 or RS485
Baud rate for COM1 fra 1,2 til 460,8 kbps
LED-indikatorer
4 kV kontakt ESD-beskyttelse til enhver terminal
Strømforsyning: +10 til +30 VDC
Driftstemperatur: -25 til +75°C
Accessories
Protective cover
for DIO-RXX and DIO-TXX
2.4GHz Omni directional antenna - dipole
for pipe montage
N-female connector
1 meter RG58 Coax cable
1 pc. RSMA - Male included
Weight: 1.4KG
Length: 45 cm
Diameter: 35mm
Double-lane recognition
Up to 60 fps at 1920 × 1080
Standalone database
IR distance up to 30 m
Day and Night function
Digital I/O (2 in / 2 out)
SD card slot for data
Built-in heater and fan
Recognize vehicles with speeds up to 100 km/h
Powered via POE / 12VDC
IP67 , Defog
31 languages on Web interface
CE, FCC, LVD, RoHS compliant
