Web Relay over LAN, Internet 1 x Digital in, 1 x Power Relay out, 30VDC, 240VAC 12A. P2P, HTTP, XML, Modbus TCP/IP, 9 - 28VDC

Controlbyweb I / O module with digital in and relay Out
No programming required
Full control of web browser or XML messages
is also a Modbus / TCP slave
password protected
30vdc , 240vac, 12a relay switch
on / off or pulsed relay states
optically isolated digital input
suitable for monitoring / relation management
Remove-Reloading (peer-to-peer)
Auto-restart
Selectable TCP ports
Removable terminal connector
DIN rail or wall mounting
Power supply: 9-28VDC / 0.5a

X-WR-1R12-1I-I
2,431.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

Web relay, can provide remote control in countless applications, including pump and engine control, safety lock systems, restarting remote control and light control. Web relay
Powerful and flexible design makes the imagination for the only limit.

Web relay also has optically isolated input that can be used to monitor the state of the units, control the relay or control a remote relay another place on the network. This feature is useful for expanding output from a PLC to another building or allowing a switch to control a device in another mode. Simply connect the relay contacts to the device to be controlled and turn on and off the relay externally by means of a web browser. Web Relay has an optically isolated input that allows you to monitor a unit's condition or control the relay contacts using a voltage. Web relay can even be used without a computer (when the installation is completed) by connecting two devices together. This is done by connecting a switch or applied a control voltage to a device and connect another device to a distant location for the device to be controlled. A PLC can control a motor in another building using two web relay devices.

4 other products in the same category:

Web enabled multi I/O...

Web enabled multi I/O module, 4 x analog in 16bit, log, 2 x digital I/O, 1-wire bus, 1 x RJ45, Modbus/TCP, PoE

4 x analog inputs with common GND
input voltage: ± 1.28V, ± 2.56V, ± 5,12V, ± 10,24V
Input current: 4-20mA - 200 Ohm Shunt resistance
2 X digital inputs / outputs: 0 - 5VDC
Digital I/O and Counter set up via the web server
1-wire bus for a maximum of 16 sensors
Temp/moisture/ultrasound, etc.
ermissions: Administrator, Manager , User
Tasks
50 Schedule Scheduled
50 Conditional
20 Torrect Scheduled
Email Alarms Based on Defined Terms
Supports Encrypted Email Servers, such as Gmail
RTC with NTP server synchronization
Basic script support for advanced flexibility
Logging and graph view
static or DHCP IP Address configuration
Modbus, SNMP, Remote Service, IP Filtering

Price 6,195.00 DKK
Product code: X-420-E
On the way in  
Quick view
Logic Controller with GSM...

Logic Controller with GSM module. Data Logger, 1 x RJ45 Ethernet, 1 x RS232, 1 x RS485. RTC. 12 - 48VDC

Built-in Web server
Logical functions with IF-THEN-ELSE setting
IF-THEN-ELSE for simple set of conditions
No more programming. Just click and finished
Supports I / O, counter, timer, calendar, e-mail, rules
Data Logger and data files supported rewind feature
Modbus TCP / RTU protocol for SCADA software seamless integration
I/O-Board XW with inputs and outputs
Supports I-7000 Remote I / O modules (up to 16)
Supports Modbus RTU slave units (up to 10)
SNTP time synchronization supported
Support SMS (GSM: Quad-band 850/900/1800/1900 MHz)
Supply voltage: 12 - 48VDC

Price 6,370.00 DKK
Product code: L-CON-LOG-GSM
Physically in stock  
Quick view
Web Enabled Programmable...

Web Enabled Programmable Controller with Log, 4 x Digital in, 4 x Relay Out COM NO Common Com, 1-Wire Bus, P2P, 9 - 28VDC

Web based controller with I/O, 1-wire bus
4 x digital inputs (Common GND)
1-wire bus, max. 16 sensors (temp / moisture etc.)
Permissions: Administrator, Manager, User
Tasks
50 Scheduled
50 Conditional
16 Automatic Restart
20 Over Rule Terms
E-mail Alarms by defined conditions
Supports encrypted e- Mail servers such as Gmail
RTC with NTP server synchronization
No software Required
Basic Script Support for Advanced Flexibility
Configurable Logging
Graph (Logged Data)
HTTPS / TLS encrypted
Static or DHCP IP Address Configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Supply voltage: PoE or 9 - 28VDC

Price 4,857.00 DKK
Product code: X-410-E
On the way in  
Quick view