8 Channel Digital Input Expansion Module for X-400 and X-600 Controller from ControlByWeb. 8 X DI 3-26VDC.

Expansion module for X-400-I and X-600M-I
8 x digital inputs - High is from 3 - 26VDC
Opto-Isolated Inputs, Common GND
Counter Input: Max. 200Hz
10 Polet interconnection flat cable for controller
RS485 Communication between the devices
Supply voltage: 9 - 28VDC from controller
Dim: 99 x 78 x 36 mm

X-15S
2,427.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

X-15'erne har 8 optisk isolerede digitale indgange og er et udvidelsesmodul til en X-400 eller X-600M controller. X-15'ernes isolerede indgange er velegnede til industrimiljøer og tillader jordforbindelsessystemet for det overvågede udstyr og lavspændingskredsløbene i X-15'erne at være elektrisk adskilt.

Internt har X-15'erne en co-processor, der giver forbedrede funktioner, herunder: pulstælling, pulsvarighed, akkumuleret pulstid og frekvensmålinger. Alle 8-indgange har separate målinger.

Et eller flere X-15s ekspansionsmoduler kan tilsluttes en X-400 eller X-600M controller med et båndkabel. Båndkablet giver både strøm og kommunikation til udvidelsesmodulerne.

Andre udvidelsesmoduler med forskellige I/O -kombinationer er også tilgængelige.

4 other products in the same category:

MODBUS / TCP to serial RTU...

MODBUS / TCP to serial RTU Master Slave, Gateway, RJ45 1 x 1 x RS-232/485/422 isolated, -25 - +75°C, PoE, or 12 - 48VDC

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 / RS485 / RS422 (terminal block)
Choose only one COM port as interface
3-pin RS232 (RX, TX, GND)
baud rate up to 115,200 bps
Self-tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

Price 1,675.00 DKK
Product code: ETH-MODGW718-I
On the way in  
Quick view
Light, temperature and...

Light, temperature and humidity sensor with RTU MODBUS / TCP, Ethernet, RS485, ceiling-mounting IP20. unit to Energy Management

The indoor light-gauge, temperature and humidity sensor 3 in 1
For energy optimization and building automation systems
Measuring range of illumination: 0 to 20,000 lux
Temperature Range: -20 to + 60 ° C
humidity Measuring range: 0 to 100% RH
Supports DCON and Modbus RTU / TCP protocols
Supports MQTT protocol Ethernet interface
With RS485 / RJ45 Ethernet communications interface
Relay output - 6 Amp @ 250VAC
Power supply: PoE and 10 - 48VDC, ca. 2 Watt
Operating temperature: 0 - + 75 ° C
web configuration and firmware update via Ethernet
Ceiling Mounting

Price 1,429.00 DKK
Product code: ET-LUXMULTI-I
On the way in  
Quick view
Web-based I/O Controller...

Web-based I/O Controller with add-on up to 64 I/O modules. With Peer-to-Peer communication. Conditions, Scheduled, Logic

Network-based I/O module control
For all ControlByWeb modules
Powerful built-in web server
Logging and automatic drawing of log files
Built-in Ethernet switch with two Ethernet connections
Expansion bus - Direct connection with up to 64 modules *
Supports USB WiFi adapters/USB flash
For 1-wire bus for temp/humidity sensors
Custom email alerts
Logical scripts or programs with Lua
Advanced planning in full calendar
Protocols: HTTP, HTTPS, SSL, SMTP, Modbus/TCP
Remote Services ™ server and client etc
Email alerts based on user defined conditions
Static or DHCP IP address configuration
XML, Modbus/TCP and SNMP interface options

Price 7,453.00 DKK
Product code: X-600M-I
Physically in stock  
Quick view