

Active Rod antenna Atomic Time
Accessories
DCF 77 kHz rod antenna w/5 meter cable
For ATOMUR-SAT-T+
Must be mounted horizontally (landscape)
Must face south (Frankfurt, Germany)
Is sensitive to EMC noise which can interfere with reception
NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz)
antenna
With network port and serial port
1U for rack mounting
Powered by 230VAC.
The ATOMUR-PRO19 has an external antenna and can be used in places where there is a problem receiving the signal. ATOMUR-PRO19 can be installed as a SNTP server, so Servers / Clients can retrieve the time via the network. All models receive the DCF77 radio signal of 77.5 KHz from Frankfurt. The range is approx. 2000 km.
Connects to a serial port 9600 bps or network port 10/100 Mbit
Displays time and date on a display and reception conditions using a number of LEDs.
Power supply: Has built-in 230 VAC power supply
Distance from receiver to PC: Can be extended on the BNC connector (antenna port) with up to 2 x K-ATOMUR + 50 (RG174U cable of 50 m) - a total of 100 m.
Software: Windows 2000, XP, 2003, Vista 32/64 and Win 7 as well as Linux using the serial port.
Accessories
DCF 77 kHz rod antenna w/5 meter cable
For ATOMUR-SAT-T+
Must be mounted horizontally (landscape)
Must face south (Frankfurt, Germany)
Is sensitive to EMC noise which can interfere with reception
Forlængerkabel til DCF antenne, 50 meter
Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C19, 16A
1 input „von USV“ IEC C20, 16A
6 x IEC C13 udgange 10A
1 x IEC C20 16A Strømforsyning
Lavt internt strømforbrug
20 ports PDU with individual and total power meters via network
User interface via web browser with Password
16 x IEC C13 outputs 10A & nbsp;
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support
24 port PDU with individual on / off and assembled power meter via network
3 x 16A CEE power supply
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
24 x IEC C13 outputs, max 10A
SNMP Get / traps and syslog support
7 ports PDU with overall power meter via network
can measure residual current measurement
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C13 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for external sensor, temperature, moisture, hPascal
SNMP Get / traps and e-mail support