Security-hardened, GPS-referenced Stratum-1 NTP v4 network time server.

Fast - up to 20,000 NTP polls per second for precise client synchronization

Highly stable, temperature-compensated backup crystal oscillator (TCXO)

Network-optimized Gigabit Ethernet (GbE)

Advanced 72-channel GPS receiver for reliable reception of the GPS satellite system.

Powerful, easy-to-use web interface with command-line interface

IPv4 and IPv6 Internet Protocols

Simple Network Management Protocol (SNMP v1, v2c, v3) monitoring. Full MD5, SHA1

SHA256 NTP authentication for improved security.

Peer-to-multiple external NTP servers for improved redundancy.

Warranty, free firmware updates and lifetime support.

CE and UKCA compliant with full EMC and electrical safety test reports.

Operating temperature: -20 to +60°C

MTBF: 143,000 hours

Supply voltage: 100-240VAC, 10W

Dimensions: 1U, 220 x 120 x 44 mm

Weight: 1.2kg

4 port power rail with port ON/OFF

IEC connector - 1 x IEC14, 4 x IEC13

Max. 10Amp

With power measurement

With sensor input

RS232 interface

RJ45 for sensor

Power ports can be turned on and off when preset sensor thresholds are exceeded.

Precise current measurement of up to 4 electrical devices

Connection to plug-and-play sensors

Dimensions: 187 x 95 x 43 mm

Temperature: 0 to +50°C

Temp/humidity meter with RJ45 for GUDE

Up to 40 meters

Temperature: -20°C to +80°C at ±2°C (maximum) and ±1°C (typical)

Humidity: 0-100% at ±3% (typical) and 10-80% at ±2% (typical)

Sensor housing: plastic

Dimensions: 42 x 20 x 35 mm

Weight: 29g

2 port power rail with port ON/OFF

IEC plug - 1 x IEC14, 2 x IEC13

Max. 10Amp

With power measurement

With sensor input

RS232 interface

RJ45 for sensor

Power ports can be turned on and off when preset sensor thresholds are exceeded.

Precise current measurement of up to 2 electrical devices

Connection to plug-and-play sensors

Dimensions: 187 x 95 x 43 mm

Temperature: 0 to +50°C

Double temperature regulation
1 x Socket for external cooling unit
1 x Socket for external heating unit
Temperature regulation from -30°C to 105°C
2.4 GHz Wi-Fi
LCD screen
Can be controlled from smart APP
Power voltage: AC 220-250V
Temperature accuracy: ±1%

GPS controlled time server for networking
NTPV4 protocol
GPS Timing at satellite lock: 15nano seconds
16 channel receiver that reduces the risk of signal loss
10 / 100baset Ethernet
HTTPS, HTTP, SSH, SCP, SNMP V1 / V2 / V3, SFTP, FTP, DHCP, DHCPv6.
SNMP V3
Linux Core
Low power consumption Only 7W
230vac 50-60Hz 0.1A
Operating temperature 0 - 50 °
comes with multi-antenna, wall mounting and 30 M RG58 antenna cable

12-port PDU with individual on/off and integrated power meter via network
Network monitoring with e.g. PRTG, Icinga, Nagios, Power IQ, Tivoli
19" rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with Password
Scheduled on/off per port
Programmable sequential power up
12 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature/humidity sensor with alarm
12 x Watchdog with ping for each connected PC
SNMP Get/traps and email support
Supports iPhone and Android

8 port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

4 Port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

8 port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

4 Port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android

Box temperature and humidity sensor for wall mounting
Sensor detected automatically
Can be connected with RJ45 STP cable up to 40 meters from the control
Temperature and humidity range: -20 ° C to + 80 ° C, + / -0.5 ° C, 0 to 90% rH, +/- 3%

Plastic sensor pipe, length: 132 mm (incl. bolted joint) diameter: 15 mm

Temperature measuring range: -20 °C to +80 °C at ±2 °C (maximum) and ±1 °C (typical)

Temperature and humidity sensor, can measure in a wet environment

Sensor is detected automatically (plug-and-play with other GUDE devices)

Length: 2.3 m with RJ45 interface

-20 °C to +80 °C

Temperature sensor +/- 0.5 ° C, humidity +/- 3%,
Sensor is automatically detected by equipment
Length: 2.3 m with Mini-DIN connector
Accessories for: GUDE NPOWER , GUDE PDUs, Remote Control

3 x tænd/sluk, potentialfri relæ ouputs, 230 V AC, 16 A / 24 V DC, 10 A
1 x strømforsyning med 12-24 V AC / DC spænding
1 x RJ45 Ethernet
3 x Watvhdog til at overvåge forbrugere (ICMP / TCP)
1 Mini-DIN-stik til valgfri sensor eller seriel interface (RS232)
Programmerbar tænd / sluk-sekvens
SNMP Get/Traps (SNMPv1, SNMPv2c)
Understøtter Android og iPhone
Syslog og E-mail
DIN-rail montering i servere racks

4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting

The ideal choice for Server Room and Server rack monitoring.
4 x potential-free switching relay outputs - 36VDC / 3A switches
Large LED display for power measurement, IP address, sensor data and error reports
4 x Watchdog for monitoring connected PCs (ICMP / TCP)
12 x passive signal inputs - (contact inputs) for Phoenix plugs
4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN
Features, limit values, alarm receivers set up on the device via supplied software
2 x 12VDC power supply inputs (redundant)
PoE - Power over Ethernet for 2111-2 the model.
Free APP for Android and iPhone
SNMP Get / Traps (SNMPv1, v2c, v3)

automatisk transfer switch (ATS) til skifte til en alternativ strømforsyning
Typisk overførselstid 7 - 10 ms.
Brugerflade via web-browser med Password
Programmerbar sekventiel power up
6 x IEC C13 udgange 10A 
1 x IEC C19 16A
3 x RJ45, LAN og Sensor
2 x IEC C20 16A strømforsyning
SNMP Get/traps og e-mail support

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C19, 16A 
1 input „von USV“ IEC C20, 16A 
6 x IEC C13 udgange 10A 
1 x IEC C20 16A  Strømforsyning
Lavt internt strømforbrug

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C13, 10A / IEC C19, 16A
1 input „von USV“ IEC C14, 10A / IEC C20, 16A
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
1 x IEC C14 10A/ IEC C20 16A Strømforsyning