CALL US NOW: +45 56 66 20 20
GUDE is a German manufacturer of high end IT equipment. PDUs, NTP Server, Server room remote control and monitoring. Product program that aims to optimize and improve the IT infrastructure that typically occurs on servers in data centers, server rack cabinets, etc. The applications range from industrial environments to office environments.
8 Port Networked PDU with Individual On / Off
19 "Rack Mount, 1U
User Interface via Web Browser with Password
Scheduled on / off per port
Programmable Sequential Power Up
8 x IEC C13 outputs, max. 10A - front mounted plug
2 x RJ45 Inputs for temperature and temperature / humidity sensor with alarm
1x Seriel Connection for control
8 x Watchdog with ping of each connected PC
SNMP Get / traps and e- mail support
Supports Iphone and Android
Size on Hole for Mast: 4x5 cm
Minimum holes for mounting: 0.5 cm
between size holes for mounting: 1 cm
largest hole for mounting: 2 cm
Accessories
DCF 77 kHz rod antenna w/5 meter cable
For ATOMUR-SAT-T+
Must be mounted horizontally (landscape)
Must face south (Frankfurt, Germany)
Is sensitive to EMC noise which can interfere with reception
GPS controlled time server for networking
NTPV4 protocol
GPS Timing at satellite lock: 15nano seconds
16 channel receiver that reduces the risk of signal loss
10 / 100baset Ethernet
HTTPS, HTTP, SSH, SCP, SNMP V1 / V2 / V3, SFTP, FTP, DHCP, DHCPv6.
SNMP V3
Linux Core
Low power consumption Only 7W
230vac 50-60Hz 0.1A
Operating temperature 0 - 50 °
comes with multi-antenna, wall mounting and 30 M RG58 antenna cable
Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable
8 port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
8 port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
4 Port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
4 Port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
12-port PDU with individual on/off and integrated power meter via network
Network monitoring with e.g. PRTG, Icinga, Nagios, Power IQ, Tivoli
19" rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with Password
Scheduled on/off per port
Programmable sequential power up
12 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature/humidity sensor with alarm
12 x Watchdog with ping for each connected PC
SNMP Get/traps and email support
Supports iPhone and Android
Active GPS signal amplifier with 8 outputs.
With TNC connector.
1U rack.
Anvendet example. to signal power several atomic clock-SAT TR / TRD time-servers
Forlængerkabel til DCF antenne, 50 meter
NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz).
Rod antenna with 5 meter cable with BNC male
Additional antenna cable 50 ohm, BNC male/male
Purchase BNC-SAMLE
With network port and serial port
1U for rack mounting
Power is supplied from 230VAC.
NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal
Standalone NTP time server
Dynamic IP address from DHCP or manual selection of IP address
Antenna is active ferrite root antenna - included
LCD display for date and time
Built-in battery back up RTC
Signal strength display
Configuration via Web browser, Windows or Linux tool
Box temperature and humidity sensor for wall mounting
Sensor detected automatically
Can be connected with RJ45 STP cable up to 40 meters from the control
Temperature and humidity range: -20 ° C to + 80 ° C, + / -0.5 ° C, 0 to 90% rH, +/- 3%
Plastic sensor pipe, length: 132 mm (incl. bolted joint) diameter: 15 mm
Temperature measuring range: -20 °C to +80 °C at ±2 °C (maximum) and ±1 °C (typical)
Temperature and humidity sensor, can measure in a wet environment
Sensor is detected automatically (plug-and-play with other GUDE devices)
Length: 2.3 m with RJ45 interface
-20 °C to +80 °C
