1 port PDU with on/off and power measurement over the network. Auto-reset of equipment. Scheduled management. IEC13/14

Event and schedule controlled switching 230VAC/10A
Accurate current measurement
Input for 2 sensors - temp/humidity, pressure
RJ45 to Ethernet
NTP function
Power port on/off via HTTP(S), SNMP, ModbusTCP, Telnet, SSH, MQTT
1-channel watchdog
Power port assigned to Watchdog (ICMP/TCP), auto reboot starts
Power consumption measurement (kwH) with 2 energy counters: one counter counts consistently, the other counter can be reset
Measurement of current (A), voltage (V), active power (W), apparent power (VA) and reactive power (VAr)
Measurement of differential current type A (mA)
Dimensions: 120 x 65 x 53 mm

NPOWER1IEC+A
3,073.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

The PDU is a network-compatible power distribution unit with a power port, which enables the switching and current metering of electrical devices via TCP/IP network. The device has a power port IEC C13, max. 10 A.
The power port of the PDU can be switched via a Webinterface, SNMP or directly on the device. At the same time, the Power Distribution Unit has SNMPv3, SSL and IPv6 capability and supports Telnet, Radius and Modbus TCP.
Thanks to the sensor connector a plug-and-play sensor can be connector to monitor environment temperature, humidity and air pressure. The connected load can be switched by the IP watchdog when preset sensor or current thresholds are exceeded.

4 other products in the same category:

Switch on and off equipment...

Switch on and off equipment via network, 4 x CEE 7/3 Schuko outputs, up to 16A, RJ45,

4 ports PDU with individual power on / off and total current meter via network
1 x Alternative Type E connector (CEE 7/3) max 16A
User interface via web browser with Password
Programmable sequential power up 4 x Schuko outputs type F, max. 16A
4 x Watchdog with ping of & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supporting Iphone and Android

Price 3,220.00 DKK
Product code: NPOWER4-1202
On the way in  
Quick view
Ethernet I/O Module, MQTT,...

Ethernet I/O Module, MQTT, 8DO/8DI, 2 x LAN

Built-in Web Server
Web HMI
Support for MQTT Protocol
2-port Ethernet Switch for Daisy-Chain Topology
Dual Watchdog
Operating Temperature -25 to +75°C
DI: 8 Channels
DO: 8 Channels

Price 1,790.00 DKK
Product code: MQ-I8O8-I
Physically in stock  
Quick view
Programmable Industrial IoT...

Programmable Industrial IoT Controller with 1 digital input and 1 digital output, 2 COM ports

CPU QuadCore Cortex A72 (ARM v8) 64 bit SoC 1.5 GHz

RAM 4GB LPDDR4 standard (1/2/8 optional)

32GB EMMC Flash Memory

1 x Micro HDMI

2x USB 3.0, 2x COM (1xRS-232/422/485, 1xRS-232/485)

RTC: Real Time Clock

1x digital input dry (open/close)/wet (0-3V/10-30V) contact

1x digital output (120VAC @0.5A, 240VAC @0.25A, 30VDC @1A)

DC 9~32V input DC Jack or terminal input

Price 5,650.00 DKK
Product code: RPI-CM4-IOT
On the way in  
Quick view