Video over BNC, 1 x video up to 1500 meters, set of 2. Power supply with 12VDC
Bandwidth: DC to 8MHz
Impedance: BNC male: 75 ohms
RJ45: 100hm
Cable UTP: 24 AWG or smaller
Max distance: 1500 meters
Operating temperature: 0 - 55 C
1 x BNC male connector per box
1 x RJ45 female connector per box
Supply voltage: 12V DC/60mA (not included)
Dimensions: 22 x 78 x 75 mm
461.00 kr
Excl. VAT
Quantity
Physically in stock
Product number KAM-BNC-RJ45
Specifications
| Båndbredde | DC to 8MHz |
|---|---|
| I/O | 1 x BNC han pr. boks, 1 x RJ45 pr. boks. |
| Kabel | 24 AWG or lower solid copper UTP:Impedance:100 ohms at 1MHz Max. Capacitance:20 pf/ft |
| Strømforsyning | 12VDC, 60mA. PSU medfølger ikke |
| Tilbehør | sæt med 2 bokse |
| Dimensioner | 22 x 78 x 75 mm |
Contains 2 modules for transferring analog video signals from e.g. surveillance cameras up to 1500 meters. The transmitter and receiver are connected with an ordinary, straight UTP/STP network cable with an RJ45 connector. The video signal is fed in from a BNC connector at one end and pulled out via a BNC connector at the other end. Thus, video signals are transmitted via one network cable - largely without quality loss.
Other products in same category:
IP / PTZ camera keyboard with 4D joystick
Network control with independent IP address
Support for ONVIF
5 inch Industrial LCD screen
Resolution 800*480, Image Decoding, Real-time Monitoring
4D Joystick Control PTZ Function
Preset patrol pattern and AB scanning
Web setting
Button for zoom and control speed
PoE
Call +45 56 66 20 20 for price
Item Number: KAM-IO-PTZ
Professional 5" service monitor for Analog camera setup. Built-in battery. With BNC, HDMI, VGA, 12VDC out
Portable Service monitor
AHD / TVI / CVI / CVBS coax in and out, HDMI in, VGA in. PAL / NTSC
12VDC 1A output for camera
800 x 480 (5: 3) 5 "TFT color screen.
Supports Pan-Tilt-Zoom Pelco-D / P PTZ via RS485
Supply: 5VDC via Micro USB-B connector.
5200 mAh battery, up to 11 hours battery life
Suitable for camera installers
Some IP cameras have CCTV output (BNC)
Cannot be used for IP cameras without BNC
1,450.00 kr
Item Number: MON5-S
Outdoor all-weather network kabinet with UPS function built-in
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS
Call +45 56 66 20 20 for price
Item Number: KAB-POE-U
16 port 12VDC, 8 Amp power supply box for rack. Built-in automatic fuse at max. 1.1 Amp per port
19" Rack power supply with 16 12 volt outlets
Output current per port: 0.5Amp
Total power consumption: 8 Amps (96 Watts)
Fuseless current limiter per port max. 1.1Amp
Built-in PTC as short-circuit protection
120 - 230VAC input
Screw terminals
Dimensions: 437 x 170 x 44 mm
Weight: 2.6kg
Operating temperature: -10 - +45°C
1,923.00 kr
Item Number: DC12V-16P-R
Camera Probe 1 m (Ø9 mm) – 640×480 Resolution
1 m probe length for moderate inspection reach
Slim 9 mm diameter to navigate tight spaces
Delivers 640 × 480 pixel video resolution
Compatible as a module for KAM-INSP-DVR systems
Useful for short-reach inspections in pipes, machinery, wall cavities, etc.
Replacement/extension option for system flexibility
538.00 kr
Item Number: KAM-INSP-DVR9T1
Camera Probe 2 m (Ø9 mm) – 640×480 Resolution
2 m probe length for extended reach
Slim 9 mm diameter suitable for tight spaces
Video resolution: 640 × 480 pixels
Compatible with KAM-INSP-DVR system as an accessory
Ideal for inspection of pipes, cavities, machines, etc.
Replacement / extension probe for existing systems
847.00 kr
Item Number: KAM-INSP-DVR9T2
Previous
Next







