Access Points / Bridge / Repeater

Industrielt 2,4/5GHz trådløst Access Point
1200Mbps 802.11ac
Dual Band
LAN Gigabit Ethernet 
1 x 10/100/1000BASE-TX RJ45 port med PoE
2 x 2.4GHz 5dBi SMA antenne, 2 x 5GHz 5dBi SMA antenne med RP-SMA-stik 
802.3at PoE, 48-56V DC input
IP30 tæt kabinet
Driftstemperatur -10 til +60°
Til vægmontering

Wifi Access Point, Bridge, Client. DIN mount
2,4GHz or 5GHz, 300Mbit
MIMO antenna, 2 x RSMA female
9 - 48VDC, 6Watt
Temperature: -10 - +60°C 
Size: 47 x 110 x 90mm

54 Mbit access point med PoE, udendørs

Samleled til 2 antenner i ét, 3 x N (hunstik)

In-Wall Dual Band Access Point / Bridge / Client
1200Mbps - 100mW
4 x 2dBi Internal Antennas
1 x RJ45 PoE + PD port Internal access - Gigabit
2 x RJ45 port, external Access - Gigabit
1 x RJ11 Port
Max. SSID 8
Max. Clients 128
IGMP proxy
SSID for VLAN Mapping (4 SSID)
Power: PoE + 48VDC
Temp -20 - + 55 ° C
Goal: 86 x 86 x 45 mm
In-Wall Back piece: 86 x 86 x 45 mm

WLAN up to 150Mbps (Single radio 2.4GHz)
Industrial 1x1 Single Input Single Output (SISO)
IEEE 802.11 b / g
2 x 10 / 100Base-TX WAN / LAN Port
Chipset: Qualcomm / Atheros AR9331 SoC
Tx Power (EIRP) 21 dB for 2.4GHz
5 dBi dipole antenna
WPA, WPA2, TKIP, AES
Power Input: 9 - 48VDC / 2W , & nbsp; 4-pin Terminal Block
Reverse Polarity Protection
IP30 Dense Housing & DIN Rail & nbsp; and Wall Mounting
Operating Temperature: 0 ° C to 60 ° C
Weight: 1 kg Dimensions: 26 x 95 x 75 mm

5GHz, 900Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n/ac
2T2R architecture with dual-polarizing 14dBi antennas built-in
Transmission power: 100mW
2 x 10/100/1000Mbps RJ45 Ethernet
For pipe mounting and wall mounting - clamping band included
Supports WAN connection in DHCP, Static IP, PPPoE
WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
IP55
Power supply: PoE+ (48Vdc) or 12VDC 1A (via DC jack)
Operating temperature: -20 - +70°C
Dimensions: 260 x 87 x 38 mm

Outdoor point two point / bridge
Buy 2 pcs. For a Bridge (Link)
2.4GHz,
Range: Up to 3km (Bridge)
IEEE 802.11b / g / n
11 DBI Directional antennas - X-polarized
Power supplies Via 24V / 1a passive poe

2 x Wifi hardware consisting of APs antennas and power supplies
Connect 2 LAN networks between 2 buildings, wireless.
PoE supply (optional).
Lightning transient protection included - placed in the masts

Wifi Uplink or Ethernet WAN connection
1 x LAN port
1 x RS232 / RS485 for Modbus RTU
1 x Digital input / 1 x Digital output
Roaming - field strength controlled
IEEE 802.11a/b/g/n/ac Wi-Fi
Supply voltage: 9 to 48 VDC
DIN rail
Operating temperature -20℃ to +60℃
Dimensions: 131 x 108 x 31 mm

Indoor Access Point, Gateway, Repeater, Super WDs
Ultra High Speed ​​AP With At the Atlictor Serving Users
Access Point, Gateway, Wisp, Repeater, Super Wds
Wave 2 Technology Increases the data amount to the individual User
Dual Band: 2.4GHz (300Mbps) / 5GHz (867Mbps)
High transmission power, adjustable
1 x RJ45 LAN with PoE + input
1 x RJ45 LAN
Supply voltage at non-PoE: 12VDC / 1.5A
Power Jack DC Input connector: 5.5 / 2.1 mm
2 x 2 5dbi built-in antennas
Transmission power: 100mW
Up to 50 users (Clients)
Dim: 186 x 186 X 36 mm
Operating temperature: 0 - + 40 ° C

300Mbps AP, Gateway, Repeater, WDS, WISP
2T2R architecture with dual-polarization 14dBi antennas built
Transmission power: 100mW
10 / 100Mbps RJ45 Kirke pipe-mounting and wall mounting
supports WAN connection for DHCP, Static IP, PPPoE
IP55
Power supply: 48VDC 0.5A (802.3at PoE +) or 12VDC 1A (via DC jack)
Operating temperature: -20 - + 70 ° C
OUTLET - OLD MODEL

Outdoor robust Dual Band Access Point etc..
AP, Gateway, Repeater, WDS, Wisp
2.4GHz and 5GHz, 300 / 867Mbit (1200Mbit)
Max. 8 SSID (4 per radio), 64 clients
1 x RJ45 Gigabit Port PoE PD
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-hona plug
IP67 Diecast aluminum cabinet for mast mounting
Operating temperature: -40 - + 70 ° C
Real-time WiFi channel Analyzer
Dim: 295 x 231 x 80 mm
Weight: 2.3kg
supply : PoE, 48V / 0.5a (PoE+)

Wifi AP, Client, Bridge, Repeater, Router
Industrial 2 x 2 Mimo
Qualcomm Atheros QCA9892
Supports IEEE 802.11 A / B / G / G / N / AC
2 x 10 / 100Base -Tx Wan / Lan-Port
TX Power 21 db to 2.4 GHz
TX Power 18 BB for 5GHz
WPA, WPA2, WPA3, WEP, TKIP, AES
Supply voltage: 9 ~ 48VDC In the 4-pin terminal block
protection against reverse polarity
IP30 protection
DIN rail or wall mountable
Operating temperature: 0 ° to 60 ° C
Dim: 162 x 110 x 46 mm

2.4GHz, 300Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n
Includes 2 pcs. 8dBi antennas
2 x N female
Transmission power: max. 500mW
1 x 10/100Mbps RJ45
For pipe mounting and wall mounting
WPA/WPA2, WPA-PSK
IP65
Power supply: PoC or PoE+ 48VDC (injector included)
Pin 4/5 +, 7/8 - PoE input.
Operating temperature: -20 - +70°C
Dimensions: 880 x 200 x 80mm
Weight 1.7kg

High Speed Access Point - Dual Band
AP, Repeater, Bridge, Bridge to several
Up to 64 simultaneous users
2.4GHz, 5GHz
Transmission: aggregated up to 1200 Mbps
Transmit power: 500mW - adjustable
2 x 5dBi antennas - removable with good range
Ports: 1 x 10/100Mbps RJ45 WAN port
IP67 tight
Powered via passive PoE or supplied 24VDC adapter
Power consumption: less than 12 Watts
Dimensions: 380 x Ø54 mm
Temperature: -40 - +55°C

Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)

WLAN LINK - AP (auto WDS), AP (TDMA), Station (WDS/TDMA) and Station (ARPNAT)
Supports ATPC function to reduce mutual interference between the CPEs
WMM (Wi-Fi multimedia) gives higher priority to multimedia transmission
Coverage threshold to limit the weak signal from clients on the line
Real-time Wi-Fi channel analysis graph and client limit control for better performance
Supports Terminal Fast Roaming with 802.11k, 802.11v and 802.11r