Wifi bridge, Wifi Uplink, Ethernet/UART to Wi-Fi converter. 3 different interfaces Wifi, Ethernet and UART RS232/485. Roaming

Wifi Uplink or Ethernet WAN connection
1 x LAN port
1 x RS232 / RS485 for Modbus RTU
1 x Digital input / 1 x Digital output
Roaming - field strength controlled
IEEE 802.11a/b/g/n/ac Wi-Fi
Supply voltage: 9 to 48 VDC
DIN rail
Operating temperature -20℃ to +60℃
Dimensions: 131 x 108 x 31 mm

4,600.00 kr
Ekskl. moms
Quantity
On the way in
Product number WLAN-AP-CNV
Get Volume Offer
close

Get Volume Offer

 
file_download DOWNLOADS
Ask a question
close

Stil et spørgsmål

 

Specifications

Afstand Op to 50 meters
Antenne 5 dBi 2.4/5 GHz
Driftstemperatur -20 ℃ to 60 ℃
Forbindelse Max. 10 Clients (AP mode)
Indgang 1 x DI (“Logic 0”: 0~3V, “Logic 1”: 3.3V~30V)
Input +9 to 48
Kanaler 2.4GHz 1~11 / 5GHz 36/40/44/48/149/153/157/161/165
Montering DIN-Rail
Porte 1 x RJ45 / 1 x RJ10
Protokol WEP / WPA / WPA2 / WPA-PSK / WPA2-PSK
Standarder IEEE 802.11a/b/g/n/ac
Udgange 1 x DO (Relay Mode, up to 30V / 1A)
WiFi sendeeffekt 2.4GHz 300 Mbps(MIMO 2T2R) / 5GHz 866 Mbps(MIMO 2T2R)

WLAN-AP-CNV is a wireless converter . The data can be exchanged via the three different interfaces Wi-Fi, Ethernet and UART. The Wi-Fi interface supports IEEE 802.11 b/g/n/ac standard. Users can select IEEE 802.11 b/g/n for 2.4GHz connections or select IEEE 802.11 ac for 5GHz connections. When the Wi-Fi strength is lower than the threshold setting, WLAN-AP-CNV can connect to another stronger one via the roaming function. The Ethernet interface can be connected by the Ethernet switch. All the Ethernet devices exchange data via the Ethernet switch and WLAN-AP-CNV. In the UART communication, data can be sent directly or formed by Modbus protocol.