Supports a 32-bit 5 V PCI Express bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 2 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)
Support a 32-bit 3.3 V or 5 V PCI bus (LPCI-7200S)
32-CH TTL digital inputs and 32-CH TTL digital outputs
Up to 12 MB/s transfer rate
Bus mastering DMA for both digital inputs and outputs
On-board programmable timer pacer clock
Supports handshaking digital I/O transfer mode
Multiple programmable interrupt sources
Compact, low-profile PCI size PCB
100KHz 16Ch Analog Input A/D Card - High Gain. 16 Single-Ended or 8 Differential Analog Input Channels Bipolar or Unipolar Input Signals Programmable High-Gain x0.5, x1, x5, x10, x50, x100, x500, x1000 12-Bit Successive Approximation A/D Converter (AD774 or equivalent) On Chip Sample & Hold Two 12-Bit Analog Output Channels 16 Digital Inputs and 16 Digital Outputs Integral DC-to-DC Converter for Stable Input Operation 37-Pin D-Sub Connector Compact Size - only half-size PCB
Isolationen beskytter både computer og måleresultaterne mod fejl, grundet forskelle i stelpotentialer.
Supports a 32-bit 5 V PCI bus
12-bit A/D resolution
Up to 100 kS/s sampling rate
32-CH single-ended or 16-CH differential inputs
On-board 1 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Programmable gains of x1, x10, x100
Automatic analog inputs scanning
16 optoisolerede indgange, fælles stel (minus) og 16 optoisolerede udgange,
Supports a 32-bit 5 V PCIe Express bus - LOW PROFILE CARD
16-CH isolated digital inputs
16-CH isolated digital outputs - Open-Collector
5000 VRMS optical isolation
Sink current up to 500 mA on each isolated output
8-CH timers/counters
2-CH cascaded 32-bit timer with 1 MHz base clock
On-board multiple base clocks ranging from 100 kHz to 2 MHz
External gate control and clock inputs for each counter
Inverted gate signals for 4-CH synchronized frequency measurement
Multiple interrupt sources from counter outputs, timer outputs and external interrupt inputs
PCI interface 96-CH digital TTL/DTL inputs/outputs Emulates 4/2/1 industry standard 8255 PPI (mode 0) Direct interface with OPTO-22 compatible I/O modules Output port status read back On board 8254 timer/counter chip Programmable interrupt source Adlink PCI-7296
PCI Express card with 96 TTL I/O channels and 3 counters
X1 PCI Express interface 96-CH digital TTL/DTL inputs/outputs Emulates 4/2/1 industry standard 8255 PPI (mode 0) Direct interface with OPTO-22 compatible I/O modules Output port status read back On board 8254 timer/counter chip Programmable interrupt source Support Windows 7/8 X64/X86 and Windows 2008 R2
16 analog inputs via USB port, 10-100S / S
Resolution: 12 bit
Sample-speed: 10Hz per channel
1 Analog output +/- 5V
4 digital outputs TTL ( CMOS
4 digital inputs TTL / CMOS
Power supplied from the USB port
DAQ Software: Purchase NextView
Universal PCI interface til +5 V and +3.3 V PCI bus.
Op til 24 digitale I/O kanaler
Programmerbare I/O porte
DIO response time 0.77 μs (1.3 MHz max.)
WIN Vista,98/NT/2000 and XP/2003 32-bit version OS
I/O modul 10 x digitale input 8 x relæ output (Type C) Forsynes via USB Alle DI kan bruges som 32-bit tæller 8kV ESD beskyttelse Udvidet temperatur -25 til +75 ° Isolation: 3000 VDC Watchdog Benytter ikke driver
4-Port 10/100 / 1000T 802.3at PCI Express
PoE + (120W)
Intel I350 Controller to 4 x RJ45
Dimensions: 169 x 121 x 18 mm | weight 251 g
Operating temperature: -10 ~ 60 C
2-Port 10/100/1000T 802.3at PCI Express
PoE+ (60W)
Intel I350AM2 Controller
2 x RJ45
Dimensions: 169 x 121 x 19 mm
Weight 161 g
Operating temperature: -10 ~ 60 C
