16 optoisolerede indgange, fælles stel (minus) og 16 optoisolerede udgange,
Supports a 32-bit 5 V PCI bus - LOW PROFILE CARD
16-CH isolated digital inputs
16-CH isolated digital outputs - Open-Collector
5000 VRMS optical isolation
Sink current up to 500 mA on each isolated output
100KHz 16Ch Analog Input A/D Card - High Gain. 16 Single-Ended or 8 Differential Analog Input Channels Bipolar or Unipolar Input Signals Programmable High-Gain x0.5, x1, x5, x10, x50, x100, x500, x1000 12-Bit Successive Approximation A/D Converter (AD774 or equivalent) On Chip Sample & Hold Two 12-Bit Analog Output Channels 16 Digital Inputs and 16 Digital Outputs Integral DC-to-DC Converter for Stable Input Operation 37-Pin D-Sub Connector Compact Size - only half-size PCB
Isolationen beskytter både computer og måleresultaterne mod fejl, grundet forskelle i stelpotentialer.
Supports a 32-bit 5 V PCI bus
12-bit A/D resolution
Up to 100 kS/s sampling rate
32-CH single-ended or 16-CH differential inputs
On-board 1 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Programmable gains of x1, x10, x100
Automatic analog inputs scanning
8-CH timers/counters
2-CH cascaded 32-bit timer with 1 MHz base clock
On-board multiple base clocks ranging from 100 kHz to 2 MHz
External gate control and clock inputs for each counter
Inverted gate signals for 4-CH synchronized frequency measurement
Multiple interrupt sources from counter outputs, timer outputs and external interrupt inputs
Universal PCI interface til +5 V and +3.3 V PCI bus.
Op til 24 digitale I/O kanaler
Programmerbare I/O porte
DIO response time 0.77 μs (1.3 MHz max.)
WIN Vista,98/NT/2000 and XP/2003 32-bit version OS
I/O modul 10 x digitale input 8 x relæ output (Type C) Forsynes via USB Alle DI kan bruges som 32-bit tæller 8kV ESD beskyttelse Udvidet temperatur -25 til +75 ° Isolation: 3000 VDC Watchdog Benytter ikke driver
Supports a PCI Express x1, Plug and Play (PCIe-7256)
16-CH latching SPDT relay outputs
Power saving on relay actuation
Output status unchanged when power-off
On-board LED indicators for relay status
16-CH isolated DI
Change-of-status (COS) interrupt
Board ID
12 bit A / D card with programmable gain
16 "single-ended" or 8 differential
45Khz for sharing between active channels (Conversion time: 8 μs)
D / A output: 1 output with 12 bit resolution
Area: 0-5 V and 0-10 V; linearity: ½ bit; stabilization time: 0.6 μs
Didital I / O: 16 TTL input and 16 TTL outputs
12 bit ver. incl. drivers for DOS and Win.
Connectors: DB37 female connector for analogue inputs and outputs
2 x 20 pin IDC connectors for 16 digital inputs and outputs and counters
4-Port 10/100 / 1000T 802.3at PCI Express
PoE + (120W)
Intel I350 Controller to 4 x RJ45
Dimensions: 169 x 121 x 18 mm | weight 251 g
Operating temperature: -10 ~ 60 C
2-Port 10/100/1000T 802.3at PCI Express
PoE+ (60W)
Intel I350AM2 Controller
2 x RJ45
Dimensions: 169 x 121 x 19 mm
Weight 161 g
Operating temperature: -10 ~ 60 C
PCI interface 96-CH digital TTL/DTL inputs/outputs Emulates 4/2/1 industry standard 8255 PPI (mode 0) Direct interface with OPTO-22 compatible I/O modules Output port status read back On board 8254 timer/counter chip Programmable interrupt source Adlink PCI-7296