High speed CAN FD interface via USB port 10-pin terminal block connector for connection to one CAN interface ISO 11898-2:2016 CAN specification ISO 11898-1 for CAN and CAN FD CAN FD supports both ISO-11898-1:2015 CAN FD data rate of up to 8 Mbps CAN bus speed up to 1 Mbps Non-standard baud rates are supported CAN FD port with +5VDC/100mA current output CAN 2.0A and CAN 2.0B protocols Listen mode, Loopback mode CAN FD interface controlled over COM port using simple ASCII commands Powered by USB port Includes a USB A/B cable. Cable length: 90 cm Windows 7 up to Windows 11, Windows Server and Linux OS Supports Linux SocketCAN (SLCAN) CanFestival drivers, CANHacker for analyzing CAN frames API library of C/C++, C#, VB6, VB.NET, Python and LabVIEW ABS plastic housing
On The Go adapter Between USB 3.0 A and USB C USB A female USB C male Clear charging current up to 6 Amp (120Watt Material: Metal shell Charging/streaming/sound Usable equipment: U disk, mouse, gamepad
Konverter fra USB til CAN bus
Tilsluttes via USB
Supporterer CAN 2.0A / 2.0B, op til 1 Mbit/s
Drivers til Windows, Linux and Mac OS X
16kV ESD surge protection
2.5kV isolation
Til væg eller DIN skinne montering
Optically isolated USB hub with 4 ports Protects USB devices and PCs from overvoltage 4000 VAC isolation on the USB port for the PC. Ports are ESD protected Suitable for medico environment
CAN Bus to USB Tester
Interface: Open 6
2 x CAN Channels
CAN Standard: ISO 11898, Can 2.0a, Can2.0b
CAN Baudrate: 5K - 1Mbps and most widely used Baud Rate
Isolation: 1500V
USB: 1.1, 2.0
Support Software: _CAN Tools, CAN Test, CAN Pro.
Operating System: Windows 2000 / XP / 2003/7/8/10
Supports VC, VB, C #, LabVIEW, LabWindows, Delphi7 OA
Operating temperature: -40 - + 85 ℃
Measure: 103 x 64 x 23 mm
Connect CAN Bus equipment over USB ports
supports CAN 2.0A and CAN 2.0B protocols
with 2.5kv isolation from Can to USB port
supplied via USB. Max. 250MA @ 5V DC
OS Support: Windows 2000 Up to Windows 10, Linux Kernel 2.6+, Mac OS X
CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port Powered from USB port LED shows initialization and CAN bus status Installs as a standard Windows COM port CAN modes: Standard, Listen, Echo Controlled using ASCII commands API provided along with examples Plug and play installation CAN bus speed up to 1 Mbps Supports CAN 2.0A and CAN 2.0B protocols Drivers provided for Windows and Linux OS Supports SocketCAN (slcan driver) since kernel 2.6.38+
Til bi-direktionel USB kommunikation til printere. Plug & Play - Tilslut parallelprinter eller scanner til pc’en via USB porten. USB 1.1 Full Speed understøtter 2 vejs kommunikation til og fra printer