CAN bus to USB adapter. Connects a PC with USB port to CAN Bus. CAN 2.0A and CAN 2.0B up to 1Mbps

CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+

Reference: CNV-USB-CAN

1,132.00 DKK

Tax excluded

Quantity

On the way in

Download PDF
Downloads

Ask a question

Description
Product Details

The Controller Area Network (CAN) is a high-integrity asynchronous serial bus system for networking intelligent devices. It is often used in automotive and industrial systems. CNV-USB-CAN is designed to provide a fast and simple way to communicate with CAN bus devices. Plugged into a USB port on your computer or USB hub, the CNV-USB-CAN instantly adds an industrial CAN bus channel to your host system with easy plug and play (PnP) and hot plug capabilities.

USB-CAN-M provides a cost-effective solution for customers that enables communication with CAN bus devices. The solution designed by ARM Cortex-M0 32-bit microcontroller and USB to serial chip makes it very flexible to handle small burst of CAN frames at high speed

Hastighed: Op til 1 Mbit på CAN bussen
Interface: USB 2.0 - bagudkompatibel til USB 1.1
OS SUPPORT: Windows 2000, XP, 2003, Vista, Win7/8/10
Stik: DB 9 han stik til CAN bus. USB type B hun stik

4 other products in the same category:

USB-C converter to 4-wire RS422 or 2/4-wire RS485, 0,25cm cable

Adds a high speed RS422 or RS485 serial port by connecting to a USB port
USB Type-C cable, 0,25m
Powered by USB port, no external power adapter required
LEDs indicate TxD and RxD for easy port monitoring and diagnosis
Installs as a standard Windows COM port
Automatic transmit and receive control for 2-wire RS485 half-duplex mode
Serial port protected with surge protection of 15kV
Non-standard baudrates supported
Easy plug and play installation and RS-422/RS485 device connection
High speed serial port with baud rate up to 3Mbps
Provides 15KV ESD protection and 600W surge protection for all serial signals
Supports Windows XP to 11, Server 2000 to Server 2022 (WHQL certified)
Supports Linux Kernel 3.0 and above
Supports Mac OS X 10.3 and above, driver signed by Apple

469.00 DKK

Product code: CNV-USBC-RS485T

On the way in

Quick view