Sensorer og detektorer

Teracom Sensorer og detektorer

Sensorer og detektorer er en vigtig komponent i ethvert system til fjernovervågning og kontrol. Sensorerne og detektorerne omdanner miljøparametre, så som temperatur, fugt, tryk etc. til elektriske signaler. Disse signaler overvåges af enheder, så som Ethernet-fjernovervågning eller GSM-fjernovervågning.

Sensorerne kommunikerer med controllere til fjernovervågning via en digital grænseflade....

Teracom Sensorer og detektorer

Sensorer og detektorer er en vigtig komponent i ethvert system til fjernovervågning og kontrol. Sensorerne og detektorerne omdanner miljøparametre, så som temperatur, fugt, tryk etc. til elektriske signaler. Disse signaler overvåges af enheder, så som Ethernet-fjernovervågning eller GSM-fjernovervågning.

Sensorerne kommunikerer med controllere til fjernovervågning via en digital grænseflade. Interfacet kan enten være 1-Wire eller RS485.

1-Wire-grænsefladen er patenteret af Maxim Integrated Company. 1-Wire sensorer har eget ID og flere kan forbindes til samme bus. I dette tilfælde kan flere parametre overvåges af en enkelt controller. 1-Wire-grænsefladen er designet til at fungere over korte afstande, er den meget populær til hjemme- og kontorautomatisering.

Sensorer med RS485 tillader også at der er flere sensorer bå samme bus. En RS485 bus kan være op til 1km lang. Sensorer med RS485 grænsefladen er egnet til støjende industrielle miljøer.

Sensorer og detektorer

There are 21 products.

Showing 1-20 of 21 item(s)

Active filters

1-wire temperature sensor,...

1-wire temperature sensor, -40 - + 85 ° C, Dallas chip, IP65, 1 meter cable

Temperature sensor with Dallas chip - up to 8 pieces on the same bus
1-wire communication to the measuring electronics
± 0.5 ° C accuracy from -10 ° C to + 85 ° C
12 bit resolution
Aluminum head provides low thermal resistance
IP65 close
Very low power consumption
Each unit has a unique 64 bit serial number

Price 254.00 DKK
Product code: TST100
Physically in stock  
  • 1-wire temperature sensor,...

    1-wire temperature sensor, -40 - + 85 ° C, box with 2 x RJ11. Cascading. Dallas chip, wall mount

    Temperature sensor with Dallas chip - up to 8 pieces on the same bus
    1-wire communication to the measuring electronics
    With connector for cascade coupling to the next sensor
    ±0.5°C accuracy from -40°C to +85°C
    12 bit resolution
    Temperature sensor in the box
    Very low power consumption
    Each device has a unique 64 bit serial number

    Price 395.00 DKK
    Product code: TST103
    Physically in stock  
  • 1-wire temperature and...

    1-wire temperature and humidity sensor, -20 - + 60 ° C, 10 - 90% RH, 1 meter cable

    1-wire communications - several sensors can be connected to the same unit
    ± 3.0% relative humidity accuracy
    ± 0.4% relative temperature accuracy
    12 bit resolution for humidity measurement
    14 bit resolution for temperature measurement
    Calibrated digital output
    Eksellent long-term stability
    Each sensor has its own unique 64-bit serial number

    Price 625.00 DKK
    Product code: TSH202
    Physically in stock  
  • 1-wire temperature and...

    1-wire temperature and humidity sensor, -20 - + 60 ° C, 10 - 90% RH, 2 x RJ11, max. 30 m, daisy-chain

    1-wire communication - 2 x RJ11 connectors for daisy chain coupling.
    ± 3.0% relative humidity accuracy.
    12 bit resolution for the moisture measurement.
    14 bit resolution for temperature measurement.
    calibrated digital output.
    Eksellent long term stability.
    Each sensor has its own unique 64-bit serial number.

    Price 791.00 DKK
    Product code: TSH206
    Physically in stock  
  • Temperature sensor with...

    Temperature sensor with RS485, -20 to +60°C, Modbus RTU interface, 14 bit resolution, cascade connection

    Temperature sensor TST300V2 with RS485 interface
    ±0.13°C accuracy from +20°C to +60°C
    14 bit resolution
    2 x RJ45 for daisy chain connection to the next sensor
    IP20 sealed housing
    Low power consumption
    Modbus address table: see TST300 manual
    Log in to danbit.dk and press DOWNLOADS

    MODBUS RTU interface

    Price 748.00 DKK
    Product code: TST300
    Physically in stock  
  • The temperature and...

    The temperature and humidity sensor with RS485, -40 to + 85 ° C, 0-100% relative humidity, MODBUS, daisy-chain

    Combination sensor for temperature and humidity measurement
    Modbus RTU
    2 x RJ45 connector - with daisy chain to the next module
    RS485 Bus to Controller.
    Up to 32 devices can be connected Controller
    3.0% relative humidity measurement accuracy
    12 bit resolution for humidity measurement
    14 bit resolution for temperature measurement
    With the mounting flanges
    Excellent long term stability
    Each module has its own ID code

    Price 876.00 DKK
    Product code: TSH300
    Physically in stock  
  • 4 channel S0 pulse counter...

    4 channel S0 pulse counter with RTU MODBUS, RS485, S0 Standard 62053-31, to Teracom data loggers

    Remote collection of data, remote meter monitoring, energy management
    Energy Meter Interface Module with MODBUS RTU
    RS-485 interface with up to 63 units per BUS
    Built-in 120 ohm termination resistor
    Flash memory data and setup
    Power supply from 5 to 32VDC, 25mA at 5VDC
    Galvanic isolated digital input - 10mS pollinghastighed
    Optional inputs: Open / Closed (dry contact and 32 bit counter)
    S0 pulse counter applications :
    Remote monitoring of electricity meters
    Industrial process control
    Remote monitoring of gas meters and water meters
    monitoring devices with S0 outputs;
    process monitoring
    DIN rail mounting
    Firmware update via interface.
    Dim: 35 x 86 x 59 mm

    Price 1,096.00 DKK
    Product code: TDI340
    On the way in  
  • Temperature and moisture...

    Temperature and moisture meter with 1-wire. -20 - +60 ° C, 5 - 95%rh. 12-16bit resolution. IP54 Robust House

    1-wire Combi Sensor
    Temperature: -20 - +60 ° C +/- 0.6 ° C
    Resolution: 0.1 ° C
    Humidity (Moisture): 5 -95% Rh +/- 5%
    Resolution 0.1%Rh
    IP54 Plastic housing, very sturdy
    Up to 8 sensors on the same 1-wire
    16 bits at temperature
    12 bits at moisture
    Supply Voltage: 4.5 / 25mW
    Dimensions: 74 x 66 x 36 mm

    Price 1,520.00 DKK
    Product code: TSH230
    On the way in  
  • Combined CO2 and barometric...

    Combined CO2 and barometric pressure sensor with a 1-wire interface for Teracom controllers

    Multisensor for CO2 and barometric pressure
    Interface: 1-wire (+/- and data)
    LED indicator for communication status
    Long-term stability based on digital signal processing
    Self-calibration on fresh air for CO2 measurements
    Interchangeable communication parameters
    Non-volatile memory for all settings
    Firmware update via the interface
    Size: 81 x 81 x 30 mm
    Weight: 66g
    Supply voltage: 4.5 - 26VDC / Max. 150mA

    Price 1,904.00 DKK
    Product code: TSM400-1-CP
    On the way in  
  • Combined CO2 and barometric...

    Combined CO2 and barometric pressure sensor with a MODBUS RTU RS485 interface.

    Multi sensor for CO2 and Barometric pressure
    Interface: RS485 - MODBUS RTU
    LED indicator for status of communication
    Long-term stability based on digital signal processing
    Self-calibration on fresh air for CO2 measurements
    Changeable communication parameters
    Non-volatile memory for all settings
    Firmware update via the interface
    Size: 81 x 81 x 30 mm
    Weight: 66g
    Supply voltage: 4,5 - 26VDC / Max. 150mA

    Price 1,894.00 DKK
    Product code: TSM400-4-CP
    Physically in stock  
  • Temperature and humidity...

    Temperature and humidity sensor with 1-wire interface for Teracom

    Temperature and humidity sensor
    1-wire interface for Teracom controller
    Temperature: +/-0.4 °C (-10 to +60 °C), max. +/-0.6°C
    Resolution: 0.1°C
    Humidity: +/-3.0% RH (20 - 80% RH), max. +/-5% relative humidity
    Solution: 0.1% RH
    Supply voltage: 4.5 - 26VDC
    LED indicator for communication status
    Long-term stability based on digital signal processing
    Changeable bit rate and other communication parameters
    Firmware update via the interface
    Size: 81 x 81 x 30 mm
    Weight: 66g

    Price 1,023.00 DKK
    Product code: TSM400-1-TH
    On the way in  
  • Temperature and humidity...

    Temperature and humidity sensor with a MODBUS RTU RS485 interface.

    Temperature and Humidity sensor
    RS485 MODBUS RTU
    Temperature: +/-0,4 °C (-10 to +60°C), max. +/-0,6°C
    Resolution: 0,1°C 
    Humidity: +/-3,0% RH (20 - 80% RH), max. +/-5% RH
    Resolution: 0,1% RH
    Supply voltage: 4,5 - 26VDC
    LED indicator for status of communication
    Long-term stability based on digital signal processing
    RS-485 interface (2-wire) carrying up to 32 nodes
    Changeable bitrate and other communication parameters
    Firmware update via the interface
    Size: 81 x 81 x 30 mm
    Weight: 66g

    Price 975.00 DKK
    Product code: TSM400-4-TH
    On the way in  
  • CO2, humidity, and...

    CO2, humidity, and temperature multi-sensor. MODBUS RTU RS485 Interface.

    Multi sensor for CO2, Temperature and Humidity
    Interface: RS485 - MODBUS RTU
    LED indicator for status of communication
    Long-term stability based on digital signal processing
    Self-calibration on fresh air for CO2 measurements
    Changeable communication parameters
    Non-volatile memory for all settings
    Firmware update via the interface
    Size: 81 x 81 x 30 mm
    Weight: 66g
    Supply voltage: 4,5 - 26VDC / Max. 150mA

    Price 2,046.00 DKK
    Product code: TSM400-4-CPTH
    On the way in