Leak detector with digital output. The unit is IP65 sealed. Sensor under the bottom. LED indicator
Previous
Next
Leak detector with digital output. The unit is IP65 sealed. Sensor under the bottom. LED indicator

Water leak detector with digital output. The device is IP65 sealed. Sensor is under the bottom. LED indicator

Water leak detector

Water leak sensor with sensor on the underside

Output: Open Collector.30V/100mA

Active LOW.

2-color LED indicator

Supply voltage: 5 - 26VDC

Flange mounting

Dimensions: 88 x 46 x 17 mm

IP65 tight

Operating temperature: 0 to +50°C

424.00 kr
Excl. VAT
Quantity
On the way in
ADD TO CART
Product number TSF400-0
Get Volume Offer
close

Get Volume Offer

 
file_download DOWNLOADS
Ask a question
close

Stil et spørgsmål

 

 

Download PDF

The TSF400-0 is a compact water leak detector designed for early detection of water on floors, trays or inside equipment cabinets. It operates from a wide 5-26 VDC supply and provides an NPN open-collector output for direct connection to PLCs, controllers, alarm modules or building automation.

automation systems.

Detection is based on the conductivity between the sensor electrodes. When water connects the electrodes, the output changes state, enabling fast and reliable alarming. The detector is fully electronic with no moving parts, ensuring high reliability and long service life.


Link to the manufacturer's web page: Water Leak Detector with Digital Output TSF400-0

Other products in same category:

TST103 is a digital temperature sensor with a 1-wire interface.
1-wire temperature sensor, -40 - + 85 ° C, box with 2 x RJ11. Cascading. Dallas chip, wall mount

Temperature sensor with Dallas chip - up to 8 pieces on the same bus
1-wire communication to the measuring electronics
With connector for cascade coupling to the next sensor
±0.5°C accuracy from -40°C to +85°C
12 bit resolution
Temperature sensor in the box
Very low power consumption
Each device has a unique 64 bit serial number

395.00 kr
Item Number: TST103
On the way in
ADD TO CART
Quick view
TeraComm TSH206v3
1-wire temperature and humidity sensor, -20 - + 60 ° C, 10 - 90% RH, 2 x RJ11, max. 30 m, daisy-chain

1-wire communication - 2 x RJ11 connectors for daisy chain coupling.
± 3.0% relative humidity accuracy.
12 bit resolution for the moisture measurement.
14 bit resolution for temperature measurement.
calibrated digital output.
Eksellent long term stability.
Each sensor has its own unique 64-bit serial number.

791.00 kr
Item Number: TSH206
Physically in stock
ADD TO CART
Quick view
Smoke alarm, 15m, height 11m
Smoke alarm with a diameter of 15 meters, white, 10 - 30 VDC. With relay output for alarm unit

Smoke alarm with a diameter of 15 meters
installation up to 11 meters high
With potential-free relay contact
Smoke sensitivity: EN 54-7:2000+ A1:2002
Operating temperature: -10 to +55 °C
Dimensions: Ø100 mm, h 47 mm
Weight: 100 g

409.00 kr
Item Number: TSS8030R
Physically in stock
ADD TO CART
Quick view
1-wire atmospheric pressure gauge, 300 - 1100HPA
1-wire atmospheric pressure gauge, 300 - 1100HPA, 2 x RJ11, cascade coupling

1-wire barometrisk trykmåler, 2 x RJ11 til daisy chain
Relativ præcision på 0.12hPa
Høj elektromagnetisk (EMC) immunitet
Høj linearitet og nøjagtighed
Nem installation
Eksellent langtids stabilitet
Hver enhed har egen unik 64 bit serienummer

744.00 kr
Item Number: TSP200
Physically in stock
ADD TO CART
Quick view
Temperature and humidity sensor with RS485. -20 - + 60 ° C, 5 - 95% RH. Modbus RTU
Temperature and humidity meter with RS485. -20 - +60°C, 5 - 95%RH. Modbus RTU. 12-16bit resolution. IP54

RS485 Modbus RTU combi sensor

Temperature: -20 - +60°C +/-0.6°C

Resolution: 0.1°C

Humidity: 5 - 95% rH +/- 5%

Resolution 0.1%rH

IP54 plastic housing, very robust

Up to 32 sensors on the same RS485 bus

16 bits at temperature

12bit when wet

Supply voltage: 4.5 - 26VDC / 25mW

Dimensions: 74 x 66 x 36 mm

1,587.00 kr
Item Number: TSH330
On the way in
ADD TO CART
Quick view
Temperature and humidity sensor with 1-wire. -20 - + 60 ° C, 5 - 95% RH
Temperature and moisture meter with 1-wire. -20 - +60 ° C, 5 - 95%rh. 12-16bit resolution. IP54 Robust House

1-wire Combi Sensor
Temperature: -20 - +60 ° C +/- 0.6 ° C
Resolution: 0.1 ° C
Humidity (Moisture): 5 -95% Rh +/- 5%
Resolution 0.1%Rh
IP54 Plastic housing, very sturdy
Up to 8 sensors on the same 1-wire
16 bits at temperature
12 bits at moisture
Supply Voltage: 4.5 / 25mW
Dimensions: 74 x 66 x 36 mm

1,520.00 kr
Item Number: TSH230
Physically in stock
ADD TO CART
Quick view
Temperature and humidity sensor with RS485, -20 to +60°C, 10-90%rH, MODBUS, cascade connection
Temperature and humidity sensor with RS485, -20 to +65°C, 10-90%rH, MODBUS, cascade connection

Combi sensor for temperature and humidity measurement

Modbus RTU

2 x RJ45 connectors - with daisy chain to next module

RS485 Bus to Controller.

Up to 32 devices can be connected to the Controller

3.0% relative humidity measurement accuracy

12 bit resolution for moisture measurement

14 bit resolution for temperature measurement

With mounting flanges

Excellent long-term stability

Each module has its own ID code

876.00 kr
Item Number: TSH300
Physically in stock
ADD TO CART
Quick view
Light sensor of visible light. 0 - 83.000lux with 23bit resolution. Automatic adjustment
Light sensor of visible light. 0 - 83,000lux with 23bit solution. Automatic setting for optimal resolution. 1-wire interface

1-wire lysmåler til synligt lys
0 - 83.000lux med 1 lux opløsning
Op til 23bit opløsning
Automatisk fuld skala justering
Kan kaskadekoples via RJ11 stik
Forsynes fra Controller med 5VDC/4mA
Maks. 30 meter kabel
Mål: 85 x 35 x 24 mm
IP30 plasthus med flange

817.00 kr
Item Number: TSL200
On the way in
ADD TO CART
Quick view
Previous
Next